arXiv subjects

Zheng Li

Publications and source records attributed to Zheng Li.

At least 451 records · Page 25Linked to original sources

arXiv2017

Amplification of entangled photon states by klystron

Entangled photon pairs-discrete light quanta that exhibit non-classical correlations-play a central role in quantum information and quantum communication technologies. It is a natural demand from technological applications on the intensity of the entangled photon pairs, such that sufficient signal strength can be achieved. Here we propose approaches based on klystron tubes that could potentially achieve stable amplification of the entangled photon pairs generated by spontaneous parametric down conversion (SPDC) and entanglement transfer.

quant-ph↗

arXiv2017

Electron-ion coupling in semiconductors beyond Fermi's golden rule

In the present work, a theoretical study of electron-phonon (electron-ion) coupling rates in semiconductors driven out of equilibrium is performed. Transient change of optical coefficients reflects the band gap shrinkage in covalently bonded materials, and thus, the heating of atomic lattice. Utilizing this dependence, we test various models of electron-ion coupling. The simulation technique is based on tight-binding molecular dynamics. Our simulations with the dedicated hybrid approach (XTANT) indicate that the widely used Fermi's golden rule can break down describing material excitation on femtosecond time scales. In contrast, dynamical coupling proposed in this work yields a reasonably good agreement of simulation results with available experimental data.

cond-mat.mtrl-sci↗

arXiv2017

Radiation-damage-free ghost diffraction with atomic resolution

The X-ray free electron lasers (XFEL) can enable diffractive structural determination of protein crystals or single molecules that are too radiation-sensitive for conventional X-ray analysis. However the electronic form factor could have been modified during the ultrashort X-ray pulse due to photoionization and electron cascade caused by the intense X-ray pulse. For general X-ray imaging techniques, to minimize radiation damage effect is of major concern to ensure faithful reconstruction of the structure. Here we show that a radiation-damage-free diffraction can be achieved with an atomic spatial resolution, by using X-ray parametric down-conversion (XPDC), and two-color two-photon ghost diffraction. We illustrate that the formation of the diffraction patterns satisfies a condition analogous to the Bragg equation, with a resolution that could be as fine as the lattice length scale of several Angstrom. Because the samples are illuminated by the optical photons of low energy, they can be free of radiation damage.

quant-ph↗

arXiv2017

A sixth-order weighted essentially non-oscillatory scheme for hyperbolic conservation laws

In this paper, A new sixth-order weighted essentially non-oscillatory (WENO) scheme, refered as the WENO-6, is proposed in the finite volume framework for the hyperbolic conservation laws. Instead of selecting one stencil for each cell in the classical WENO scheme [10], two independent stencils are used for two ends of the considering cell in the current approach. Meanwhile, the stencils, which are used for the reconstruction of variables at both sides of interface, are symmetrical. Compared with the classical WENO scheme [10], the current WENO scheme achieves one order of improvement in accuracy with the same stencil. The reconstruction procedure is defined by a convex combination of reconstructed values at cell interface, which are constructed from two quadratic and two cubic polynomials. The essentially non-oscillatory property is achieved by the similar weighting methodology as the classical WENO scheme. A variety of numerical examples are presented to validate the accuracy and robustness of the current scheme.

math.NA↗

arXiv2017

AstroCloud: A Distributed Cloud Computing and Application Platform for Astronomy

Virtual Observatory (VO) is a data-intensively online astronomical research and education environment, which takes advantages of advanced information technologies to achieve seamless and global access to astronomical information. AstroCloud is a cyber-infrastructure for astronomy research initiated by Chinese Virtual Observatory (China-VO) project, and also a kind of physical distributed platform which integrates lots of tasks such as telescope access proposal management, data archiving, data quality control, data release and open access, cloud based data processing and analysis. It consists of five application channels, i.e. observation, data, tools, cloud and public and is acting as a full lifecycle management system and gateway for astronomical data and telescopes. Physically, the platform is hosted in six cities currently, i.e. Beijing, Nanjing, Shanghai, Kunming, Lijiang and Urumqi, and serving more than 17 thousand users. Achievements from international Virtual Observatories and Cloud Computing are adopted heavily. In the paper, backgrounds of the project, architecture, Cloud Computing environment, key features of the system, current status and future plans are introduced.

astro-ph.IM↗

arXiv2016

BAUM: A DNA Assembler by Adaptive Unique Mapping and Local Overlap-Layout-Consensus

Genome assembly from the high-throughput sequencing (HTS) reads is a fundamental yet challenging computational problem. An intrinsic challenge is the uncertainty caused by the widespread repetitive elements. Here we get around the uncertainty using the notion of uniquely mapped (UM) reads, which motivated the design of a new assembler BAUM. It mainly consists of two types of iterations. The first type of iterations constructs initial contigs from a reference, say a genome of a species that could be quite distant, by adaptive read mapping, filtration by the reference's unique regions, and reference updating. A statistical test is proposed to split the layouts at possible structural variation sites. The second type of iterations includes mapping, scaffolding/contig-extension, and contig merging. We extend each contig by locally assembling the reads whose mates are uniquely mapped to an end of the contig. Instead of the de Bruijn graph method, we take the overlap-layout-consensus (OLC) paradigm. The OLC is implemented by parallel computation, and has linear complexity with respect to the number of contigs. The adjacent extended contigs are merged if their alignment is confirmed by the adjusted gap distance. Throughout the assembling, the mapping criterion is selected by probabilistic calculations. These innovations can be used complementary to the existing de novo assemblers. Applying this novel method to the assembly of wild rice Oryza longistaminata genome, we achieved much improved contig N50, 18.8k, compared with other assemblers. The assembly was further validated by contigs constructed from an independent library of long 454 reads.

q-bio.GN↗

arXiv2016

Interface induced high temperature superconductivity in single unit-cell FeSe films on SrTiO3(110)

We report high temperature superconductivity in one unit-cell (1-UC) FeSe films grown on STO(110) substrate by molecular beam epitaxy. By in-situ scanning tunneling spectroscopy measurement, we observed a superconducting gap as large as 17 meV. Transport measurements on 1-UC FeSe/STO(110) capped with FeTe layers reveal superconductivity with an onset TC of 31.6 K and an upper critical magnetic field of 30.2 T. We also find that the TC can be further increased by an external electric field, but the effect is smaller than that on STO(001) substrate. The study points out the important roles of interface related charge transfer and electron-phonon coupling in the high temperature superconductivity of FeSe/STO.

cond-mat.supr-con↗

arXiv2016

Lattice Boltzmann Method Simulation of 3-D Melting Using Double MRT Model with Interfacial Tracking Method

Three-dimensional melting problems are investigated numerically with Lattice Boltzmann method (LBM). Regarding algorithm's accuracy and stability, Multiple-Relaxation-Time (MRT) models are employed to simplify the collision term in LBM. Temperature and velocity fields are solved with double distribution functions, respectively. 3-D melting problems are solved with double MRT models for the first time in this article. The key point for the numerical simulation of a melting problem is the methods to obtain the location of the melting front and this article uses interfacial tracking method. The interfacial tracking method combines advantages of both deforming and fixed grid approaches. The location of the melting front was obtained by calculating the energy balance at the solid-liquid interface. Various 3-D conduction controlled melting problems are solved firstly to verify the numerical method. Liquid fraction tendency and temperature distribution obtained from numerical methods agree with the analytical results well. The proposed double MRT model with interfacial tracking method is valid to solve 3-D melting problems. Different 3-D convection controlled melting problems are then solved with the proposed numerical method. Various locations of the heat surface have different melting front moving velocities, due to the natural convection effects. Rayleigh number's effects to the 3-D melting process is discussed.

physics.flu-dyn↗

arXiv2016

Effects of Slotted Structures on Nonlinear Characteristics of Natural Convection in a Cylinder with an Internal Concentric Slotted Annulus

Natural convection in a cylinder with an internally slotted annulus was solved by SIMPLE algorithm, and the effects of different slotted structures on nonlinear characteristics of natural convection were investigated. The results show that the equivalent thermal conductivity Keq increases with Rayleigh number, and reaches the maximum in the vertical orientation. Nonlinear results were obtained by simulating the fluid flow at different conditions. With increasing Rayleigh number, heat transfer is intensified and the state of heat transfer changes from the steady to unsteady. We investigated different slotted structures effects on natural convection, and analyze the corresponding nonlinear characteristics.

physics.flu-dyn↗

arXiv2016

Double MRT Thermal Lattice Boltzmann Method for Simulating Natural Convection of Low Prandtl Number Fluids

The purposes of this paper are testing an efficiency algorithm based on LBM and using it to analyze two-dimensional natural convection with low Prandtl number. Steady state or oscillatory results are obtained using double multiple-relaxation-time thermal lattice Boltzmann method. The velocity and temperature fields are solved using D2Q9 and D2Q5 models, respectively. With different Rayleigh number, the tested natural convection can either achieve to steady state or oscillatory. With fixed Rayleigh number, lower Prandtl number leads to a weaker convection effect, longer oscillation period and higher oscillation amplitude for the cases reaching oscillatory solutions. At fixed Prandtl number, higher Rayleigh number leads to a more notable convection effect and longer oscillation period. Double multiple-relaxation-time thermal lattice Boltzmann method is applied to simulate the low Prandtl number fluid natural convection. Rayleigh number and Prandtl number effects are also investigated when the natural convection results oscillate.

physics.comp-ph↗

arXiv2015

Atomically Resolved FeSe/SrTiO3(001) Interface Structure by Scanning Transmission Electron Microscopy

Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe films on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. By combined in-situ scanning tunneling microscopy/spectroscopy (STM/STS) and ex-situ scanning transmission electron microscopy (STEM) studies, we report on atomically resolved structure including both lattice constants and actual atomic positions of the FeSe/STO interface under both non-superconducting and superconducting states. We observed TiO2 double layers (DLs) and significant atomic displacements in the top two layers of STO, lattice compression of the Se-Fe-Se triple layer, and relative shift between bottom Se and topmost Ti atoms. By imaging the interface structures under various superconducting states, we unveil a close correlation between interface structure and superconductivity. Our atomic-scale identification of FeSe/STO interface structure provides useful information on investigating the pairing mechanism of this interface-enhanced high-temperature superconducting system.

cond-mat.supr-con↗

arXiv2015

Lattice Boltzmann Method Simulation of 3-D Natural Convection with Double MRT Model

Multiple-relaxation-time model (MRT) has more advantages than the many others approaches in the Lattice Boltzmann Method (LBM). Three-dimensional double MRT model is proposed for the first time for fluid flow and heat transfer simulation. Three types of cubic natural convection problems are solved with proposed method at various Rayleigh numbers. Two opposite vertical walls on the left and right are kept at different temperatures for all three types, while the remained four walls are either adiabatic or have linear temperature variations. For the first two types of cubic natural convections that four walls are either adiabatic or vary linearly, the present results agreed very well with the benchmark solutions or experimental results in the literature. For the third type of cubic natural convection, the front and back surfaces has linearly variable temperature while the bottom and top surface are adiabatic. The results from the third type exhibited more general three-dimensional characters.

physics.comp-ph↗

arXiv2015

Superconductivity dichotomy in K-coated single and double unit cell FeSe films on SrTiO3

We report the superconductivity evolution of one unit cell (1-UC) and 2-UC FeSe films on SrTiO3(001) substrates with potassium (K) adsorption. By in situ scanning tunneling spectroscopy measurement, we find that the superconductivity in 1-UC FeSe films is continuously suppressed with increasing K coverage, whereas non-superconducting 2-UC FeSe films become superconducting with a gap of ~17 meV or ~11 meV depending on whether the underlying 1-UC films are superconducting or not. This work explicitly reveals that the interface electron-phonon coupling is strongly related to the charge transfer at FeSe/STO interface and plays vital role in enhancing Cooper pairing in both 1-UC and 2-UC FeSe films.

cond-mat.supr-con↗

arXiv2015

The more Product Complexity, the more Actual Effort? An Empirical Investigation into Software Developments

[Background:] Software effort prediction methods and models typically assume positive correlation between software product complexity and development effort. However, conflicting observations, i.e. negative correlation between product complexity and actual effort, have been witnessed from our experience with the COCOMO81 dataset. [Aim:] Given our doubt about whether the observed phenomenon is a coincidence, this study tries to investigate if an increase in product complexity can result in the abovementioned counter-intuitive trend in software development projects. [Method:] A modified association rule mining approach is applied to the transformed COCOMO81 dataset. To reduce noise of analysis, this approach uses a constant antecedent (Complexity increases while Effort decreases) to mine potential consequents with pruning. [Results:] The experiment has respectively mined four, five, and seven association rules from the general, embedded, and organic projects data. The consequents of the mined rules suggested two main aspects, namely human capability and product scale, to be particularly concerned in this study. [Conclusions:] The negative correlation between complexity and effort is not a coincidence under particular conditions. In a software project, interactions between product complexity and other factors, such as Programmer Capability and Analyst Capability, can inevitably play a "friction" role in weakening the practical influences of product complexity on actual development effort.

cs.SE↗

arXiv2015

Interface enhanced electron-phonon coupling and high temperature superconductivity in potassium-coated ultra-thin FeSe films on SrTiO3

Alkali-metal (potassium) adsorption on FeSe thin films with thickness from two unit cells (UC) to 4-UC on SrTiO3 grown by molecular beam epitaxy is investigated with a low-temperature scanning tunneling microscope. At appropriate potassium coverage (0.2-0.3 monolayer), the tunneling spectra of the films all exhibit a superconducting-like gap larger than 11 meV (five times the gap value of bulk FeSe), and two distinct features of characteristic phonon modes at 11 meV and 21 meV. The results reveal the critical role of the interface enhanced electron-phonon coupling for possible high temperature superconductivity in the system and is consistent with recent theories. Our study provides compelling evidence for the conventional pairing mechanism for this type of heterostructure superconducting systems.

cond-mat.supr-con↗

arXiv2015

Thermal and nonthermal melting of silicon under femtosecond x-ray irradiation

As it is known from visible light experiments, silicon under femtosecond pulse irradiation can undergo the so-called 'nonthermal melting' if the density of electrons excited from the valence to the conduction band overcomes a certain critical value. Such ultrafast transition is induced by strong changes in the atomic potential energy surface, which trigger atomic relocation. However, heating of a material due to the electron-phonon coupling can also lead to a phase transition, called 'thermal melting'. This thermal melting can occur even if the excited-electron density is much too low to induce non-thermal effects. To study phase transitions, and in particular, the interplay of the thermal and nonthermal effects in silicon under a femtosecond x-ray irradiation, we propose their unified treatment by going beyond the Born-Oppenheimer approximation within our hybrid model based on tight binding molecular dynamics. With our extended model we identify damage thresholds for various phase transitions in irradiated silicon. We show that electron-phonon coupling triggers the phase transition of solid silicon into a low-density liquid phase if the energy deposited into the sample is above $\sim0.65$ eV per atom. For the deposited doses of over $\sim0.9$ eV per atom, solid silicon undergoes a phase transition into high-density liquid phase triggered by an interplay between electron-phonon heating and nonthermal effects. These thresholds are much lower than those predicted with the Born-Oppenheimer approximation ($\sim2.1$ eV/atom), and indicate a significant contribution of electron-phonon coupling to the relaxation of the laser-excited silicon. We expect that these results will stimulate dedicated experimental studies, unveiling in detail various paths of structural relaxation within laser-irradiated silicon.

cond-mat.mtrl-sci↗

arXiv2014

SINAP surface preparation processing for 500MHz superconducting cavity

This paper illustrates the design, fabrication and experiment results of surface preparation system for 500MHz superconducting cavity at Shanghai Institute of Applied Physic (SINAP). The SINAP established a set of clean room, buffered chemical polishing equipment, and high pressure ultra-pure water rinsing facility. The whole surface preparation procedure has been operated successfully and verified by the successful vertical tests of 500MHz single cell superconducting cavity.

physics.acc-ph↗

arXiv2014

Studies of LL-type 500MHz 5-cell superconducting cavity at SINAP

A low loss (LL) type 500 MHz 5-cell superconducting niobium prototype cavity with large beam aperture has been developed successfully including the optimization, the deep drawing and electron beam welding, the surface treatment and the vertical testing. The performance of the fundamental mode was optimized and the higher order modes were damped by adopting an enlarged beam pipe for propagation. Surface preparation or treatment including mechanical polishing, buffered chemical polishing and high pressure rinsing with ultra-pure water and so on was carried out carefully to promise a perfect inner surface condition. The vertical testing results show that the accelerating voltage higher than 7.5 MV was obtained while the quality factor was better than 1E9 at 4.2 K. No obvious multipacting or field emission was found during the test. However, a quench happened while increasing the field a little higher than 7.5 MV that at present limited the cavity performance.

physics.acc-ph↗