arXiv subjects

Zhengguo Li

Publications and source records attributed to Zhengguo Li.

51 records · Page 3Linked to original sources

arXiv2021

Deep Joint Demosaicing and High Dynamic Range Imaging within a Single Shot

Spatially varying exposure (SVE) is a promising choice for high-dynamic-range (HDR) imaging (HDRI). The SVE-based HDRI, which is called single-shot HDRI, is an efficient solution to avoid ghosting artifacts. However, it is very challenging to restore a full-resolution HDR image from a real-world image with SVE because: a) only one-third of pixels with varying exposures are captured by camera in a Bayer pattern, b) some of the captured pixels are over- and under-exposed. For the former challenge, a spatially varying convolution (SVC) is designed to process the Bayer images carried with varying exposures. For the latter one, an exposure-guidance method is proposed against the interference from over- and under-exposed pixels. Finally, a joint demosaicing and HDRI deep learning framework is formalized to include the two novel components and to realize an end-to-end single-shot HDRI. Experiments indicate that the proposed end-to-end framework avoids the problem of cumulative errors and surpasses the related state-of-the-art methods.

eess.IV↗

arXiv2021

Multi-Scale Single Image Dehazing Using Laplacian and Gaussian Pyramids

Model driven single image dehazing was widely studied on top of different priors due to its extensive applications. Ambiguity between object radiance and haze and noise amplification in sky regions are two inherent problems of model driven single image dehazing. In this paper, a dark direct attenuation prior (DDAP) is proposed to address the former problem. A novel haze line averaging is proposed to reduce the morphological artifacts caused by the DDAP which enables a weighted guided image filter with a smaller radius to further reduce the morphological artifacts while preserve the fine structure in the image. A multi-scale dehazing algorithm is then proposed to address the latter problem by adopting Laplacian and Guassian pyramids to decompose the hazy image into different levels and applying different haze removal and noise reduction approaches to restore the scene radiance at different levels of the pyramid. The resultant pyramid is collapsed to restore a haze-free image. Experiment results demonstrate that the proposed algorithm outperforms state of the art dehazing algorithms and the noise is indeed prevented from being amplified in the sky region.

cs.CV↗

arXiv2021

Object Servoing of Differential-Drive Robots

Due to possibly changing pose of a movable object and nonholonomic constraint of a differential-drive robot, it is challenging to design an object servoing scheme for the differential-drive robot to asymptotically park at a predefined relative pose to the movable object. In this paper, a novel object servoing scheme is designed for the differential-drive robots. Each on-line relative pose is first estimated by using feature points of the moveable object and it serves as the input of an object servoing friendly parking controller. The linear velocity and angular velocity are then determined by the parking controller. Experimental results validate the performance of the proposed object servoing scheme. Due to its low on-line computational cost, the proposed scheme can be applied for last mile delivery of differential-drive robots to movable objects.

cs.RO↗

arXiv2021

Piecewise Linear De-skewing for LiDAR Inertial Odometry

Light detection and ranging (LiDAR) on a moving agent could suffer from motion distortion due to simultaneous rotation of the LiDAR and fast movement of the agent. An accurate piecewise linear de skewing algorithm is proposed to correct the motion distortions for LiDAR inertial odometry (LIO) using high frequency motion information provided by an Inertial Measurement Unit (IMU). Experimental results show that the proposed algorithm can be adopted to improve the performance of existing LIO algorithms especially in cases of fast movement.

cs.RO↗

arXiv2021

Automatic Vocabulary and Graph Verification for Accurate Loop Closure Detection

Localizing pre-visited places during long-term simultaneous localization and mapping, i.e. loop closure detection (LCD), is a crucial technique to correct accumulated inconsistencies. As one of the most effective and efficient solutions, Bag-of-Words (BoW) builds a visual vocabulary to associate features and then detect loops. Most existing approaches that build vocabularies off-line determine scales of the vocabulary by trial-and-error, which often results in unreasonable feature association. Moreover, the accuracy of the algorithm usually declines due to perceptual aliasing, as the BoW-based method ignores the positions of visual features. To overcome these disadvantages, we propose a natural convergence criterion based on the comparison between the radii of nodes and the drifts of feature descriptors, which is then utilized to build the optimal vocabulary automatically. Furthermore, we present a novel topological graph verification method for validating candidate loops so that geometrical positions of the words can be involved with a negligible increase in complexity, which can significantly improve the accuracy of LCD. Experiments on various public datasets and comparisons against several state-of-the-art algorithms verify the performance of our proposed approach.

cs.CV↗

arXiv2021

Deep Inertial Odometry with Accurate IMU Preintegration

Inertial Measurement Units (IMUs) are interceptive modalities that provide ego-motion measurements independent of the environmental factors. They are widely adopted in various autonomous systems. Motivated by the limitations in processing the noisy measurements from these sensors using their mathematical models, researchers have recently proposed various deep learning architectures to estimate inertial odometry in an end-to-end manner. Nevertheless, the high-frequency and redundant measurements from IMUs lead to long raw sequences to be processed. In this study, we aim to investigate the efficacy of accurate preintegration as a more realistic solution to the IMU motion model for deep inertial odometry (DIO) and the resultant DIO is a fusion of model-driven and data-driven approaches. The accurate IMU preintegration has the potential to outperform numerical approximation of the continuous IMU model used in the existing DIOs. Experimental results validate the proposed DIO.

cs.LG↗

arXiv2020

Robust Alignment of Multi-Exposed Images with Saturated Regions

It is challenging to align multi-exposed images due to large illumination variations, especially in presence of saturated regions. In this paper, a novel image alignment algorithm is proposed to cope with the multi-exposed images with saturated regions. Specifically, the multi-exposed images are first normalized by using intensity mapping functions (IMFs) in consideration of saturated pixels. Then, the normalized images are coded by using the local binary pattern (LBP). Finally, the coded images are aligned by formulating an optimization problem by using a differentiable Hamming distance. Experimental results show that the proposed algorithm outperforms state-of-the-art alignment methods for multi-exposed images in terms of alignment accuracy and robustness to exposure values.

eess.IV↗

arXiv2020

Exposure Interpolation by Combining Model-driven and Data-driven Methods

Deep learning based methods have penetrated many image processing problems and become dominant solutions to these problems. A natural question raised here is "Is there any space for conventional methods on these problems?" In this paper, exposure interpolation is taken as an example to answer this question and the answer is "Yes". A framework on fusing conventional and deep learning method is introduced to generate an medium exposure image for two large-exposureratio images. Experimental results indicate that the quality of the medium exposure image is increased significantly through using the deep learning method to refine the interpolated image via the conventional method. The conventional method can be adopted to improve the convergence speed of the deep learning method and to reduce the number of samples which is required by the deep learning method.

eess.IV↗

arXiv2020

Single Image Brightening via Multi-Scale Exposure Fusion with Hybrid Learning

A small ISO and a small exposure time are usually used to capture an image in the back or low light conditions which results in an image with negligible motion blur and small noise but look dark. In this paper, a single image brightening algorithm is introduced to brighten such an image. The proposed algorithm includes a unique hybrid learning framework to generate two virtual images with large exposure times. The virtual images are first generated via intensity mapping functions (IMFs) which are computed using camera response functions (CRFs) and this is a model-driven approach. Both the virtual images are then enhanced by using a data-driven approach, i.e. a residual convolutional neural network to approach the ground truth images. The model-driven approach and the data-driven one compensate each other in the proposed hybrid learning framework. The final brightened image is obtained by fusing the original image and two virtual images via a multi-scale exposure fusion algorithm with properly defined weights. Experimental results show that the proposed brightening algorithm outperforms existing algorithms in terms of the MEF-SSIM metric.

cs.CV↗

arXiv2019

Toward Underground Localization: Lidar Inertial Odometry Enabled Aerial Robot Navigation

Localization can be achieved by different sensors and techniques such as a global positioning system (GPS), wifi, ultrasonic sensors, and cameras. In this paper, we focus on the laser-based localization method for unmanned aerial vehicle (UAV) applications in a GPS denied environment such as a deep tunnel system. Other than a low-cost 2D LiDAR for the planar axes, a single axis Lidar for the vertical axis as well as an inertial measurement unit (IMU) device is used to increase the reliability and accuracy of the localization performance. We present a comparative analysis of the three selected laser-based simultaneous localization and mapping(SLAM) approaches:(i) Hector SLAM; (ii) Gmapping; and(iii) Cartographer. These algorithms have been implemented and tested through real-world experiments. The results are compared with the ground truth data and the experiments are available at https://youtu.be/kQc3mJjw_mw.

cs.RO↗

arXiv2019

S&CNet: Monocular Depth Completion for Autonomous Systems and 3D Reconstruction

Dense depth completion is essential for autonomous systems and 3D reconstruction. In this paper, a lightweight yet efficient network (S\&CNet) is proposed to obtain a good trade-off between efficiency and accuracy for the dense depth completion. A dual-stream attention module (S\&C enhancer) is introduced to measure both spatial-wise and the channel-wise global-range relationship of extracted features so as to improve the performance. A coarse-to-fine network is designed and the proposed S\&C enhancer is plugged into the coarse estimation network between its encoder and decoder network. Experimental results demonstrate that our approach achieves competitive performance with existing works on KITTI dataset but almost four times faster. The proposed S\&C enhancer can be plugged into other existing works and boost their performance significantly with a negligible additional computational cost.

eess.IV↗

arXiv2019

Accurate IMU Preintegration Using Switched Linear Systems For Autonomous Systems

Employing an inertial measurement unit (IMU) as an additional sensor can dramatically improve both reliability and accuracy of visual/Lidar odometry (VO/LO). Different IMU integration models are introduced using different assumptions on the linear acceleration from the IMU. In this paper, a novel IMU integration model is proposed by using switched linear systems. The proposed approach assumes that both the linear acceleration and the angular velocity in the body frame are constant between two consecutive IMU measurements. This is more realistic in real world situation compared to existing approaches which assume that linear acceleration is constant in the world frame while angular velocity is constant in the body frame between two successive IMU measurements. Experimental results show that the proposed approach outperforms the state-of-the-art IMU integration model. The proposed model is thus important for localization of high speed autonomous vehicles in GPS denied environments.

cs.RO↗

arXiv2019

High Speed Tracking With A Fourier Domain Kernelized Correlation Filter

It is challenging to design a high speed tracking approach using l1-norm due to its non-differentiability. In this paper, a new kernelized correlation filter is introduced by leveraging the sparsity attribute of l1-norm based regularization to design a high speed tracker. We combine the l1-norm and l2-norm based regularizations in one Huber-type loss function, and then formulate an optimization problem in the Fourier Domain for fast computation, which enables the tracker to adaptively ignore the noisy features produced from occlusion and illumination variation, while keep the advantages of l2-norm based regression. This is achieved due to the attribute of Convolution Theorem that the correlation in spatial domain corresponds to an element-wise product in the Fourier domain, resulting in that the l1-norm optimization problem could be decomposed into multiple sub-optimization spaces in the Fourier domain. But the optimized variables in the Fourier domain are complex, which makes using the l1-norm impossible if the real and imaginary parts of the variables cannot be separated. However, our proposed optimization problem is formulated in such a way that their real part and imaginary parts are indeed well separated. As such, the proposed optimization problem can be solved efficiently to obtain their optimal values independently with closed-form solutions. Extensive experiments on two large benchmark datasets demonstrate that the proposed tracking algorithm significantly improves the tracking accuracy of the original kernelized correlation filter (KCF) while with little sacrifice on tracking speed. Moreover, it outperforms the state-of-the-art approaches in terms of accuracy, efficiency, and robustness.

cs.CV↗

arXiv2018

Gradient-Free Learning Based on the Kernel and the Range Space

In this article, we show that solving the system of linear equations by manipulating the kernel and the range space is equivalent to solving the problem of least squares error approximation. This establishes the ground for a gradient-free learning search when the system can be expressed in the form of a linear matrix equation. When the nonlinear activation function is invertible, the learning problem of a fully-connected multilayer feedforward neural network can be easily adapted for this novel learning framework. By a series of kernel and range space manipulations, it turns out that such a network learning boils down to solving a set of cross-coupling equations. By having the weights randomly initialized, the equations can be decoupled and the network solution shows relatively good learning capability for real world data sets of small to moderate dimensions. Based on the structural information of the matrix equation, the network representation is found to be dependent on the number of data samples and the output dimension.

cs.LG↗

arXiv2018

Structure-preserving Guided Retinal Image Filtering and Its Application for Optic Disc Analysis

Retinal fundus photographs have been used in the diagnosis of many ocular diseases such as glaucoma, pathological myopia, age-related macular degeneration and diabetic retinopathy. With the development of computer science, computer aided diagnosis has been developed to process and analyse the retinal images automatically. One of the challenges in the analysis is that the quality of the retinal image is often degraded. For example, a cataract in human lens will attenuate the retinal image, just as a cloudy camera lens which reduces the quality of a photograph. It often obscures the details in the retinal images and posts challenges in retinal image processing and analysing tasks. In this paper, we approximate the degradation of the retinal images as a combination of human-lens attenuation and scattering. A novel structure-preserving guided retinal image filtering (SGRIF) is then proposed to restore images based on the attenuation and scattering model. The proposed SGRIF consists of a step of global structure transferring and a step of global edge-preserving smoothing. Our results show that the proposed SGRIF method is able to improve the contrast of retinal images, measured by histogram flatness measure, histogram spread and variability of local luminosity. In addition, we further explored the benefits of SGRIF for subsequent retinal image processing and analysing tasks. In the two applications of deep learning based optic cup segmentation and sparse learning based cup-to-disc ratio (CDR) computation, our results show that we are able to achieve more accurate optic cup segmentation and CDR measurements from images processed by SGRIF.

cs.CV↗