arXiv subjects

Zhengzhong Yi

Publications and source records attributed to Zhengzhong Yi.

13 recordsLinked to original sources

arXiv2026

Surface code logical operations on a superconducting quantum processor

Fault-tolerant quantum computation requires logical operations that manipulate encoded information while preserving quantum error-correction protection. In planar surface-code architectures, code deformation and lattice surgery provide a local, measurement-based route to such operations. Here we experimentally realize key elements of patch-based surface-code logical processing on a 107-qubit superconducting quantum processor. We first implement a reusable primitive layer comprising merge and split, patch expansion and shrinkage, and deformations mediated by domain walls and twist defects. We then compose these primitives to realize logical state routing, the logical controlled-NOT gate, and the single-qubit Hadamard and phase gates, which together form a Clifford-generating set. All operations are implemented on distance-three rotated surface-code patches with multi-round syndrome extraction and neural-network decoding, without post-selection. Our results advance superconducting surface-code experiments from protected logical memory to active, patch-based fault-tolerant logical operations.

quant-ph↗

arXiv2026

Learning to Decode in Parallel: Self-Coordinating Neural Network for Real-Time Quantum Error Correction

Fast, reliable decoders are pivotal components for enabling fault-tolerant quantum computation (FTQC). Neural network decoders like AlphaQubit have demonstrated potential, achieving higher accuracy than traditional human-designed decoding algorithms. However, existing implementations of neural network decoders lack the parallelism required to decode the syndrome stream generated by a superconducting logical qubit in real time. Moreover, integrating AlphaQubit with sliding window-based parallel decoding schemes presents non-trivial challenges: AlphaQubit is trained solely to output a single bit corresponding to the global logical correction for an entire memory experiment, rather than local physical corrections that can be easily integrated. We address this issue by training a recurrent, transformer-based neural network specifically tailored for parallel window decoding. While it still outputs a single bit, we derive training labels from a consistent set of local corrections and train on various types of decoding windows simultaneously. This approach enables the network to self-coordinate across neighboring windows, facilitating high-accuracy parallel decoding of arbitrarily long memory experiments. As a result, we overcome the throughput bottleneck that previously precluded the use of AlphaQubit-type decoders in FTQC. Our work presents the first scalable, neural-network-based parallel decoding framework that simultaneously achieves SOTA accuracy and the stringent throughput required for real-time quantum error correction. Using an end-to-end experimental workflow, we benchmark our decoder on the Zuchongzhi 3.2 superconducting quantum processor on surface codes with distances up to 7, demonstrating its superior accuracy. Moreover, we demonstrate that, using our approach, a single TPU v6e is capable of decoding surface codes with distances up to 25 within 1us per decoding round.

quant-ph↗

arXiv2025

An exploration of the noise sensitivity of the Shor's algorithm

Quantum algorithms face significant challenges due to qubit susceptibility to environmental noise, and quantum error correction typically requires prohibitive resource overhead. This paper proposes that quantum algorithms may possess inherent noise resilience characteristics that could reduce implementation barriers. We investigate Shor's algorithm by applying circuit-level noise models directly to the original algorithm circuit. Our findings reveal that Shor's algorithm demonstrates superior fault tolerance under Z noise compared to X and Y noise. Focusing on the modular exponentiation circuit which is the core component of the algorithm, we conduct fault-tolerant position statistics on circuits with bit lengths from 4 to 9. The results show that under Z noise, fault-tolerant positions grow with the same quartic polynomial order as potential error positions as the problem scale increases. In contrast, fault tolerance under X and Y noise exhibits a strong dependence on the composite number N and the parameter a. Based on these findings, we develop an extrapolation method predicting that the minimum probability of a correct output of the modular exponentiation circuit to factor 2048 bit integers under biased noise is approximately 1.417*{10}^{-17}.

quant-ph↗

arXiv2025

High-dimensional quantum XYZ product codes for biased noise

Three-dimensional (3D) quantum XYZ product can construct a class of non-CSS quantum codes by using three classical codes. However, there has been limited study on their error-correcting performance so far and whether this code construction can be generalized to higher dimension is an open question. In this paper, we first study the error-correcting performance of the 3D Chamon code, which is an instance of the 3D XYZ product of three repetition codes. Second, we show that the 3D XYZ product can be generalized to four dimension and propose four-dimensional (4D) XYZ product code construction, which constructs a class of non-CSS quantum codes by using either four classical codes or two CSS quantum codes. Compared with the 4D homological product, we show that the 4D XYZ product can construct non-CSS codes with higher code dimension or code distance. Third, we consider two instances of the 4D XYZ product, to which we refer as the 4D Chamon code and the 4D XYZ product concatenated code, respectively. Our simulation results show that, the 4D XYZ product can construct non-CSS codes with better error-correcting performance against Pauli-$Z$-biased noise than CSS codes constructed by the 4D homological product. Finally, we present the geometric arrangement of the 4D Chamon code within a 4D cubic lattice, demonstrating that it possesses two key characteristics of fracton models, which strongly suggest that it is a novel 4D fracton model.

quant-ph↗

arXiv2025

Improved Belief Propagation Decoding Algorithms for Surface Codes

Quantum error correction is crucial for universal fault-tolerant quantum computing. Highly accurate and low-time-complexity decoding algorithms play an indispensable role in ensuring quantum error correction works effectively. Among existing decoding algorithms, belief propagation (BP) is notable for its nearly linear time complexity and general applicability to stabilizer codes. However, BP's decoding accuracy without post-processing is unsatisfactory in most situations. This article focuses on improving the decoding accuracy of BP over GF(4) for surface codes. Inspired by machine learning optimization techniques, we first propose Momentum-BP and AdaGrad-BP to reduce oscillations in message updating, breaking the trapping sets of surface codes. We further propose EWAInit-BP, which adaptively updates initial probabilities and provides a 1 to 3 orders of magnitude improvement over traditional BP for planar surface code, toric code, and XZZX surface code without any post-processing method, showing high decoding accuracy even under parallel scheduling. The theoretical $O(1)$ time complexity under parallel implementation and high accuracy of EWAInit-BP make it a promising candidate for high-precision real-time decoders.

quant-ph↗

arXiv2025

Quantum XYZ cyclic codes for biased noise

In some quantum computing architectures, Pauli noise is highly biased. Tailoring Quantum error-correcting codes to the biased noise may benefit reducing the physical qubit overhead without reducing the logical error rate. In this paper, we propose a family of quantum XYZ cyclic codes, which are the only one family of quantum cyclic codes with code distance increasing with code length to our best knowledge and have good error-correcting performance against biased noise. Our simulation results show that the quantum XYZ cyclic codes have $50\%$ code-capacity thresholds for all three types of pure Pauli noise and around $13\%$ code-capacity threshold for depolarizing noise. In the finite-bias regime, when the noise is biased towards Pauli $Z$ errors with noise bias ratios $η_Z=1000$, the corresponding code-capacity threshold is around $49\%$. Besides, we show that to reach the same code distance, the physical qubit overhead of XYZ cyclic code is much less than that of the XZZX surface code.

quant-ph↗

arXiv2024

Recursive expansion of Tanner graph: a method to construct stabilizer codes with high coding rate

Quantum stabilizer codes face the problem of low coding rate. In this article, following the idea of recursively expanding Tanner graph proposed in our previous work, we try to construct new stabilizer codes with high coding rate, and propose XZ-type Tanner-graph-recursive-expansion (XZ-TGRE) code and Tanner-graph-recursive-expansion hypergraph product (TGRE-HP) code. XZ-TGRE code have zero asymptotic coding rate, but its coding rate tends to zero extremely slowly with the growth of code length. Under the same code length, its coding rate is much higher than that of surface code. The coding rate of TGRE-HP is the constant 0.2, which is the highest constant coding rate of stabilizer codes to our best knowledge. We prove that the code distance of XZ-TGRE code scales as $O(log(N))$, and that of TGRE-HP code scales as $O(\log \sqrt{N})$, where $N$ is the code length. Moreover, the code capacity noise threshold of XZ-TGRE code is around 0.078, and that of TGRE-HP code is around 0.096. This articles shows that the idea of recursively expanding Tanner graph might have potential to construct quantum codes with good performance.

quant-ph↗

arXiv2024

Hypergraph product code with 0.2 constant coding rate and high code capacity noise threshold

The low coding rate of quantum stabilizer codes results in formidable physical qubit overhead when realizing quantum error correcting in engineering. In this letter, we propose a new class of hypergraph-product code called TGRE-hypergraph-product code. This code has constant coding rate 0.2, which is the highest constant coding rate of quantum stabilizer codes to our best knowledge. We perform simulations to test the error correcting capability TGRE-hypergraph-product code and find their code capacity noise threshold in depolarizing noise channel is around 0.096.

quant-ph↗

arXiv2024

Quantum polar stabilizer codes based on polarization of pure quantum channel don't work for quantum computing

Inspired by classical polar codes, whose coding rate can asymptotically achieve the Shannon capacity, researchers are trying to find its analogue in quantum information field, which are called quantum polar codes. However, no one has designed a quantum polar coding scheme which applies to quantum computing yet. There are two intuitions in previous research. The first is that directly converting classical polar coding circuits to quantum ones will produce polarization phenomenon of pure quantum channel, which has been proved in our previous work. The second is that based on this quantum polarization phenomenon one can design a quantum polar coding scheme that applies to quantum computing. There are several previous work following the second intuition, none of which has been verified by experiments. In this paper, we follow the second intuition and propose a more reasonable quantum polar stabilizer code construction algorithm than any previous ones by using the theory of stabilizer codes. Unfortunately, simulation experiments show that even the stabilizer codes obtained from this more reasonable construction algorithm don't work, which implies that the second intuition leads to a dead end. Based on the analysis on why the second intuition don't work, we provide a possible future direction of designing quantum stabilizer codes with high coding rate by borrowing the idea of classical polar codes. following this direction, we find a class of quantum stabilizer codes with coding rate 0.5 for pure Pauli X, Z and Y noise.

quant-ph↗

arXiv2024

Determining the upper bound of code distance of quantum stabilizer codes through Monte Carlo method based on fully decoupled belief propagation

Code distance is an important parameter for quantum stabilizer codes (QSCs). Directly precisely computing it is an NP-complete problem. However, the upper bound of code distance can be computed by some efficient methods. In this paper, employing the idea of Monte Carlo method, we propose the algorithm of determining the upper bound of code distance of QSCs based on fully decoupled belief propagation. Our algorithm shows high precision - the upper bound of code distance determined by the algorithm of a variety of QSCs whose code distance is known is consistent with actual code distance. Besides, we explore the upper bound of logical X operators of Z-type Tanner-graph-recursive-expansion (Z-TGRE) code and Chamon code, which is a kind of XYZ product code constructed by three repetition codes. The former is consistent with the theoretical analysis, and the latter implies the code distance of XYZ product codes can very likely achieve $O(N^{2/3})$, which supports the conjecture of Leverrier et al..

quant-ph↗

arXiv2023

Improved belief propagation decoding algorithm based on decoupling representation of Pauli operators for quantum LDPC codes

We propose a new method called decoupling representation to represent Pauli operators as vectors over $GF(2)$, based on which we propose partially decoupled belief propagation and fully decoupled belief propagation decoding algorithm for quantum low density parity-check codes. These two algorithms have the capability to deal with the correlations between the $X$ part and the $Z$ part of the vectors in symplectic representation, which are introduced by Pauli $Y$ errors. Hence, they can not only apply to CSS codes, but also to non-CSS codes. Under the assumption that there is no measurement error, compared with traditional belief propagation algorithm in symplectic representation over $GF(2)$, within the same number of iterations, the decoding accuracy of partially decoupled belief propagation and fully decoupled belief propagation algorithm is significantly improved in pure $Y$ noise and depolarizing noise, which supports that decoding algorithms of quantum error correcting codes might have better performance in decoupling representation than in symplectic representation. The impressive performance of fully decoupled belief propagation algorithm might promote the realization of quantum error correcting codes in engineering.

quant-ph↗

arXiv2022

Channel Polarization of Two-dimensional-input Quantum Symmetric Channels

Being attracted by the property of classical polar code, researchers are trying to find its analogue in quantum fields, which is called quantum polar code. The first step and the key to design quantum polar code is to find out for the quantity which can measure the quality of quantum channels, whether there is a polarization phenomenon which is similar to classical channel polarization. Coherent information is believed to be the quantum analogue of classical mutual information and the quantity to measure the capacity of quantum channel. In this paper, we define a class of quantum channels called quantum symmetric channels, and prove that for quantum symmetric channels, under the similar channel combining and splitting process as in the classical channel polarization, the maximum single letter coherent information of the coordinate channels will polarize. That is to say, there is a channel polarization phenomenon in quantum symmetric channels.

quant-ph↗

arXiv2021

Improved Polar-code-based Efficient Post-processing Algorithm for Quantum Key Distribution

Combined with one-time pad encryption scheme, quantum key distribution guarantees the unconditional security of communication in theory. However, error correction and privacy amplification in the post-processing phase of quantum key distribution result in high time delay, which limits the final secret key generation rate and the practicability of quantum key distribution systems. To alleviate this limitation, this paper proposes an efficient post-processing algorithm based on polar codes for quantum key distribution. In this algorithm, by analyzing the channel capacity of the main channel and the wiretap channel respectively under the Wyner's wiretap channel model, we design a codeword structure of polar codes, so that the error correction and privacy amplification could be completed synchronously in a single step. Through combining error correction and privacy amplification into one single step, this efficient post-processing algorithm reduces complexity of the system and lower the post-processing delay. Besides, the reliable and secure communicaiton conditions for this algorithm has been given in this paper. Simulation results show that this post-processing algorithm satisfies the reliable and secure communication conditions well.

quant-ph↗