arXiv subjects

Zheyuan Li

Publications and source records attributed to Zheyuan Li.

16 recordsLinked to original sources

arXiv2026

CABAL: Multi-Agent Simulacra for Tracing the Effects of Collusive Bidding in Peer Review

Recent reports during the AAAI-27 review cycle highlight the risk of reviewers coordinating bids for reciprocal assignment advantage. Prior work treats bidding, reviewer assignment, and review manipulation as separate stages, leaving the lifecycle effects of collusive bidding unclear. Real-world analysis is further constrained by typically unobservable collusive intent and the lack of counterfactuals for the same conference. Motivated by this gap, we introduce \alg, an end-to-end multi-agent simulacra framework for studying reviewer assignment integrity by holding the conference environment fixed and configuring LLM-driven reviewer agents with honest or collusive policies. We further develop an affinity-guided collusive bidding strategy that uses mutual reviewer-paper affinities to construct collusion rings and select target papers, producing expertise-consistent rather than arbitrarily targeted attacks. Controlled experiments show that collusive bidding more than doubles target-paper capture and that assigned colluders score target papers about two points higher than honest co-reviewers, while conference-wide effects remain comparatively modest. Evaluated bid-phase detectors provide only limited evidence of collusion: in a fixed-triplet detector stress test, native positive-bid graphs are confounded by benign affinity, while a Very-High-only diagnostic view enables precise but low-coverage local recovery.

cs.AI↗

arXiv2026

UModel: An Agent-Ready Observability Data Modeling Method at Scale

When networked system failures occur, automatically performing Root Cause Analysis (RCA) using observability data is critical for ensuring networked system reliability. Recently, LLM-based agents have shown promise for automating this diagnosis process through advanced reasoning and autonomous exploration. However, existing observability frameworks remain archaic, characterized by fragmented data silos, incompatible schemas, and insufficient semantic metadata, preventing agents from establishing the complex relationships required for effective RCA. To address these challenges, we present UModel, a unified ontological framework that shifts observability from data-centric to object-centric modeling. UModel constructs a virtual ontological layer where heterogeneous telemetry, entities, and expert knowledge are standardized as objects and interconnected via semantic graphs. In addition, we introduce U-SPL, a pipeline-based query interface that enables agents to autonomously explore system topologies and correlate multimodal data. By re-modeling the "AIOps 2025 Challenge" dataset using UModel, the precision of root cause localization improved by 8%, demonstrating that enhanced data organization can significantly increase the accuracy of downstream tasks. UModel provides a scalable modeling framework that, in its deployment at Alibaba Cloud for more than one year, has served tens of thousands of users, sustained millions of operations per second, and delivered sub-second query latency.

cs.SE↗

arXiv2026

Quantum science with arrays of metastable helium-3 atoms

The motion of atoms in programmable optical tweezer arrays offers many new opportunities for neutral atom quantum science. These include inter- and intra-site atom motion for resource-efficient implementations of fermionic and bosonic modes, respectively, as well as tweezer transport for efficient compilation of arbitrary circuits. However, the exploitation of atomic motion for all three purposes and others is limited by the inertia of the atoms. We present a comprehensive architectural blueprint for the use of fermionic metastable helium-3 ($^3$He$^*$) atoms -- the lightest trappable atomic species -- in programmable optical tweezer arrays. This includes a concrete analysis of atomic structure considerations as well as Rydberg-mediated interactions. We show that inter-tweezer hopping of $^3$He$^*$ atoms can be $\gtrsim3\times$ faster than previous demonstrations with lithium-6. We also demonstrate a new toolbox for encoding and manipulating qubits directly in the tweezer trap potential, uniquely enabled by the light mass of $^3$He$^*$. Finally, we provide several examples of new opportunities for fermionic quantum simulation and computation that leverage the transport and inter-tweezer hopping of $^3$He$^*$ atom arrays. These tools present new methods to improve the resource efficiency of neutral atom quantum science that may also enable quantum simulations of lattice gauge theories and quantum chemistry outside the Born-Oppenheimer approximation

quant-ph↗

arXiv2025

UniCon: Unidirectional Information Flow for Effective Control of Large-Scale Diffusion Models

We introduce UniCon, a novel architecture designed to enhance control and efficiency in training adapters for large-scale diffusion models. Unlike existing methods that rely on bidirectional interaction between the diffusion model and control adapter, UniCon implements a unidirectional flow from the diffusion network to the adapter, allowing the adapter alone to generate the final output. UniCon reduces computational demands by eliminating the need for the diffusion model to compute and store gradients during adapter training. Our results indicate that UniCon reduces GPU memory usage by one-third and increases training speed by 2.3 times, while maintaining the same adapter parameter size. Additionally, without requiring extra computational resources, UniCon enables the training of adapters with double the parameter volume of existing ControlNets. In a series of image conditional generation tasks, UniCon has demonstrated precise responsiveness to control inputs and exceptional generation capabilities.

cs.CV↗

arXiv2024

Interpreting Low-level Vision Models with Causal Effect Maps

Deep neural networks have significantly improved the performance of low-level vision tasks but also increased the difficulty of interpretability. A deep understanding of deep models is beneficial for both network design and practical reliability. To take up this challenge, we introduce causality theory to interpret low-level vision models and propose a model-/task-agnostic method called Causal Effect Map (CEM). With CEM, we can visualize and quantify the input-output relationships on either positive or negative effects. After analyzing various low-level vision tasks with CEM, we have reached several interesting insights, such as: (1) Using more information of input images (e.g., larger receptive field) does NOT always yield positive outcomes. (2) Attempting to incorporate mechanisms with a global receptive field (e.g., channel attention) into image denoising may prove futile. (3) Integrating multiple tasks to train a general model could encourage the network to prioritize local information over global context. Based on the causal effect theory, the proposed diagnostic tool can refresh our common knowledge and bring a deeper understanding of low-level vision models. Codes are available at https://github.com/J-FHu/CEM.

cs.CV↗

arXiv2024

Enhancing Descriptive Image Quality Assessment with A Large-scale Multi-modal Dataset

With the rapid advancement of Vision Language Models (VLMs), VLM-based Image Quality Assessment (IQA) seeks to describe image quality linguistically to align with human expression and capture the multifaceted nature of IQA tasks. However, current methods are still far from practical usage. First, prior works focus narrowly on specific sub-tasks or settings, which do not align with diverse real-world applications. Second, their performance is sub-optimal due to limitations in dataset coverage, scale, and quality. To overcome these challenges, we introduce the enhanced Depicted image Quality Assessment model (DepictQA-Wild). Our method includes a multi-functional IQA task paradigm that encompasses both assessment and comparison tasks, brief and detailed responses, full-reference and non-reference scenarios. We introduce a ground-truth-informed dataset construction approach to enhance data quality, and scale up the dataset to 495K under the brief-detail joint framework. Consequently, we construct a comprehensive, large-scale, and high-quality dataset, named DQ-495K. We also retain image resolution during training to better handle resolution-related quality issues, and estimate a confidence score that is helpful to filter out low-quality responses. Experimental results demonstrate that DepictQA-Wild significantly outperforms traditional score-based methods, prior VLM-based IQA models, and proprietary GPT-4V in distortion identification, instant rating, and reasoning tasks. Our advantages are further confirmed by real-world applications including assessing the web-downloaded images and ranking model-processed images. Codes, datasets, and model weights have been released in https://depictqa.github.io/.

cs.CV↗

arXiv2024

Scaling Up to Excellence: Practicing Model Scaling for Photo-Realistic Image Restoration In the Wild

We introduce SUPIR (Scaling-UP Image Restoration), a groundbreaking image restoration method that harnesses generative prior and the power of model scaling up. Leveraging multi-modal techniques and advanced generative prior, SUPIR marks a significant advance in intelligent and realistic image restoration. As a pivotal catalyst within SUPIR, model scaling dramatically enhances its capabilities and demonstrates new potential for image restoration. We collect a dataset comprising 20 million high-resolution, high-quality images for model training, each enriched with descriptive text annotations. SUPIR provides the capability to restore images guided by textual prompts, broadening its application scope and potential. Moreover, we introduce negative-quality prompts to further improve perceptual quality. We also develop a restoration-guided sampling method to suppress the fidelity issue encountered in generative-based restoration. Experiments demonstrate SUPIR's exceptional restoration effects and its novel capacity to manipulate restoration through textual prompts.

cs.CV↗

arXiv2023

Depicting Beyond Scores: Advancing Image Quality Assessment through Multi-modal Language Models

We introduce a Depicted image Quality Assessment method (DepictQA), overcoming the constraints of traditional score-based methods. DepictQA allows for detailed, language-based, human-like evaluation of image quality by leveraging Multi-modal Large Language Models (MLLMs). Unlike conventional Image Quality Assessment (IQA) methods relying on scores, DepictQA interprets image content and distortions descriptively and comparatively, aligning closely with humans' reasoning process. To build the DepictQA model, we establish a hierarchical task framework, and collect a multi-modal IQA training dataset. To tackle the challenges of limited training data and multi-image processing, we propose to use multi-source training data and specialized image tags. These designs result in a better performance of DepictQA than score-based approaches on multiple benchmarks. Moreover, compared with general MLLMs, DepictQA can generate more accurate reasoning descriptive languages. We also demonstrate that our full-reference dataset can be extended to non-reference applications. These results showcase the research potential of multi-modal IQA methods. Codes and datasets are available in https://depictqa.github.io.

cs.CV↗

arXiv2023

A Comparative Study of Image Restoration Networks for General Backbone Network Design

Despite the significant progress made by deep models in various image restoration tasks, existing image restoration networks still face challenges in terms of task generality. An intuitive manifestation is that networks which excel in certain tasks often fail to deliver satisfactory results in others. To illustrate this point, we select five representative networks and conduct a comparative study on five classic image restoration tasks. First, we provide a detailed explanation of the characteristics of different image restoration tasks and backbone networks. Following this, we present the benchmark results and analyze the reasons behind the performance disparity of different models across various tasks. Drawing from this comparative study, we propose that a general image restoration backbone network needs to meet the functional requirements of diverse tasks. Based on this principle, we design a new general image restoration backbone network, X-Restormer. Extensive experiments demonstrate that X-Restormer possesses good task generality and achieves state-of-the-art performance across a variety of tasks.

cs.CV↗

arXiv2023

Towards Efficient SDRTV-to-HDRTV by Learning from Image Formation

Modern displays can render video content with high dynamic range (HDR) and wide color gamut (WCG). However, most resources are still in standard dynamic range (SDR). Therefore, transforming existing SDR content into the HDRTV standard holds significant value. This paper defines and analyzes the SDRTV-to-HDRTV task by modeling the formation of SDRTV/HDRTV content. Our findings reveal that a naive endto-end supervised training approach suffers from severe gamut transition errors. To address this, we propose a new three-step solution called HDRTVNet++, which includes adaptive global color mapping, local enhancement, and highlight refinement. The adaptive global color mapping step utilizes global statistics for image-adaptive color adjustments. A local enhancement network further enhances details, and the two sub-networks are combined as a generator to achieve highlight consistency through GANbased joint training. Designed for ultra-high-definition TV content, our method is both effective and lightweight for processing 4K resolution images. We also constructed a dataset using HDR videos in the HDR10 standard, named HDRTV1K, containing 1235 training and 117 testing images, all in 4K resolution. Additionally, we employ five metrics to evaluate SDRTV-to-HDRTV performance. Our results demonstrate state-of-the-art performance both quantitatively and visually. The codes and models are available at https://github.com/xiaom233/HDRTVNet-plus.

cs.CV↗

arXiv2023

GET3D--: Learning GET3D from Unconstrained Image Collections

The demand for efficient 3D model generation techniques has grown exponentially, as manual creation of 3D models is time-consuming and requires specialized expertise. While generative models have shown potential in creating 3D textured shapes from 2D images, their applicability in 3D industries is limited due to the lack of a well-defined camera distribution in real-world scenarios, resulting in low-quality shapes. To overcome this limitation, we propose GET3D--, the first method that directly generates textured 3D shapes from 2D images with unknown pose and scale. GET3D-- comprises a 3D shape generator and a learnable camera sampler that captures the 6D external changes on the camera. In addition, We propose a novel training schedule to stably optimize both the shape generator and camera sampler in a unified framework. By controlling external variations using the learnable camera sampler, our method can generate aligned shapes with clear textures. Extensive experiments demonstrate the efficacy of GET3D--, which precisely fits the 6D camera pose distribution and generates high-quality shapes on both synthetic and realistic unconstrained datasets.

cs.CV↗

arXiv2022

Efficient Image Super-Resolution using Vast-Receptive-Field Attention

The attention mechanism plays a pivotal role in designing advanced super-resolution (SR) networks. In this work, we design an efficient SR network by improving the attention mechanism. We start from a simple pixel attention module and gradually modify it to achieve better super-resolution performance with reduced parameters. The specific approaches include: (1) increasing the receptive field of the attention branch, (2) replacing large dense convolution kernels with depth-wise separable convolutions, and (3) introducing pixel normalization. These approaches paint a clear evolutionary roadmap for the design of attention mechanisms. Based on these observations, we propose VapSR, the VAst-receptive-field Pixel attention network. Experiments demonstrate the superior performance of VapSR. VapSR outperforms the present lightweight networks with even fewer parameters. And the light version of VapSR can use only 21.68% and 28.18% parameters of IMDB and RFDN to achieve similar performances to those networks. The code and models are available at https://github.com/zhoumumu/VapSR.

eess.IV↗

arXiv2022

Automatic Search Intervals for the Smoothing Parameter in Penalized Splines

The selection of smoothing parameter is central to the estimation of penalized splines. The best value of the smoothing parameter is often the one that optimizes a smoothness selection criterion, such as generalized cross-validation error (GCV) and restricted likelihood (REML). To correctly identify the global optimum rather than being trapped in an undesired local optimum, grid search is recommended for optimization. Unfortunately, the grid search method requires a pre-specified search interval that contains the unknown global optimum, yet no guideline is available for providing this interval. As a result, practitioners have to find it by trial and error. To overcome such difficulty, we develop novel algorithms to automatically find this interval. Our automatic search interval has four advantages. (i) It specifies a smoothing parameter range where the associated penalized least squares problem is numerically solvable. (ii) It is criterion-independent so that different criteria, such as GCV and REML, can be explored on the same parameter range. (iii) It is sufficiently wide to contain the global optimum of any criterion, so that for example, the global minimum of GCV and the global maximum of REML can both be identified. (iv) It is computationally cheap compared with the grid search itself, carrying no extra computational burden in practice. Our method is ready to use through our recently developed R package gps (>= version 1.1). It may be embedded in more advanced statistical modeling methods that rely on penalized splines.

stat.ME↗

arXiv2022

Blueprint Separable Residual Network for Efficient Image Super-Resolution

Recent advances in single image super-resolution (SISR) have achieved extraordinary performance, but the computational cost is too heavy to apply in edge devices. To alleviate this problem, many novel and effective solutions have been proposed. Convolutional neural network (CNN) with the attention mechanism has attracted increasing attention due to its efficiency and effectiveness. However, there is still redundancy in the convolution operation. In this paper, we propose Blueprint Separable Residual Network (BSRN) containing two efficient designs. One is the usage of blueprint separable convolution (BSConv), which takes place of the redundant convolution operation. The other is to enhance the model ability by introducing more effective attention modules. The experimental results show that BSRN achieves state-of-the-art performance among existing efficient SR methods. Moreover, a smaller variant of our model BSRN-S won the first place in model complexity track of NTIRE 2022 Efficient SR Challenge. The code is available at https://github.com/xiaom233/BSRN.

cs.CV↗

arXiv2022

NTIRE 2022 Challenge on Efficient Super-Resolution: Methods and Results

This paper reviews the NTIRE 2022 challenge on efficient single image super-resolution with focus on the proposed solutions and results. The task of the challenge was to super-resolve an input image with a magnification factor of $\times$4 based on pairs of low and corresponding high resolution images. The aim was to design a network for single image super-resolution that achieved improvement of efficiency measured according to several metrics including runtime, parameters, FLOPs, activations, and memory consumption while at least maintaining the PSNR of 29.00dB on DIV2K validation set. IMDN is set as the baseline for efficiency measurement. The challenge had 3 tracks including the main track (runtime), sub-track one (model complexity), and sub-track two (overall performance). In the main track, the practical runtime performance of the submissions was evaluated. The rank of the teams were determined directly by the absolute value of the average runtime on the validation set and test set. In sub-track one, the number of parameters and FLOPs were considered. And the individual rankings of the two metrics were summed up to determine a final ranking in this track. In sub-track two, all of the five metrics mentioned in the description of the challenge including runtime, parameter count, FLOPs, activations, and memory consumption were considered. Similar to sub-track one, the rankings of five metrics were summed up to determine a final ranking. The challenge had 303 registered participants, and 43 teams made valid submissions. They gauge the state-of-the-art in efficient single image super-resolution.

cs.CV↗

arXiv2022

General P-Splines for Non-Uniform B-Splines

We proposed a new penalized B-splines estimator, the general P-spline, to accommodate non-uniform B-splines on unevenly spaced knots. It is a complement to Eilers and Marx's standard P-spline tailored for uniform B-splines on equidistant knots. At its core, we derived a novel general difference penalty that accounts for irregular knot spacing, while still being easy to compute and interpret. Both P-spline variants are useful for practical smoothing, because either one can produce a more satisfactory fit than the other, depending on the knot sequence being used and the data being analyzed. Therefore, practitioners should try out both before betting on either one, for which we have implemented general P-spline in R packages gps and gps.mgcv. The new general P-spline is closely related to O'Sullivan spline (or O-spline) through a sandwich formula that links general difference penalty to derivative penalty. Though both penalties seem equally powerful in wiggliness control for their mathematical association and statistical similarity, simulation studies show that general P-spline either outperforms O-spline in terms of mean squared error, or performs equally well, making it a superior replacement of O-spline.

stat.ME↗