arXiv subjects

Zhi Hao Jiang

Publications and source records attributed to Zhi Hao Jiang.

4 recordsLinked to original sources

arXiv2026

Airy Beamforming for Radiative Near-Field MU-XL-MIMO: Overcoming Half-Space Blockage

The move to next-generation wireless communications with extremely large-scale antenna arrays (ELAAs) brings the communications into the radiative near-field (RNF) region, where distance-aware focusing is feasible. However, high-frequency RNF links are highly vulnerable to blockage in indoor environments dominated by half-space obstacles (walls, corners) that create knife-edge shadows. Conventional near-field focused beams offer high gain in line-of-sight (LoS) scenarios but suffer from severe energy truncation and effective-rank collapse in shadowed regions, often necessitating the deployment of auxiliary hardware such as Reconfigurable Intelligent Surfaces (RIS) to restore connectivity. We propose a beamforming strategy that exploits the auto-bending property of Airy beams to mitigate half-space blockage without additional hardware. The Airy beam is designed to ``ride'' the diffraction edge, accelerating its main lobe into the shadow to restore connectivity. Our contributions are threefold: (i) a Green's function-based RNF multi-user channel model that analytically reveals singular-value collapse behind knife-edge obstacles; (ii) an Airy analog beamforming scheme that optimizes the bending trajectory to recover the effective channel rank; and (iii) an Airy null-steering method that aligns oscillatory nulls with bright-region users to suppress interference in mixed shadow/bright scenarios. Simulations show that the proposed edge-riding Airy strategy achieves a Signal-to-Noise Ratio (SNR) improvement of over 20 dB and restores full-rank connectivity in shadowed links compared to conventional RNF focusing, virtually eliminating outage in geometric shadows and increasing multi-user spectral efficiency by approximately 35\% under typical indoor ELAA configurations. These results demonstrate robust RNF multi-user access in half-space blockage scenarios without relying on RIS.

cs.IT↗

arXiv2026

Non-Diffracting Beams for Near-Field Millimeter-Wave Communications: Advantage Regimes Under Aperture and Blockage Constraints

Near-field blockage changes the beam-design objective in millimeter-wave links: maximizing the unblocked on-axis gain does not necessarily maximize blocked-link performance. This paper studies when phase-only, aperture-constrained non-diffracting (ND) beams provide a blocked-link advantage over equal-aperture, equal-power conventional reference beams. We develop a unified annular-spectrum framework that generates isotropic Bessel-like and anisotropic Mathieu-like beams under discrete phased-array constraints, and a geometry-aware analysis centered on three propagation landmarks: the peak-intensity distance, the crossover distance, and an effective post-blockage recovery distance. Their relationship yields a recovery-before-crossover condition linking blockage size, depth, cone angle, and usable ND range, and motivates a blocked-link gain ratio that maps directly onto an achievable-rate gap at every operating SNR. The analysis also explains why anisotropic Mathieu-like beams can outperform isotropic ones under direction-dependent blockage. Monte Carlo simulations verify the predicted advantage regimes, an auxiliary comparison against a near-field focusing baseline confirms that the advantage persists against an unblocked-optimal array, and sensitivity studies over cone-angle choice and partial-transmission blockers show that the opaque-screen picture is a conservative reading of the underlying physics. The results identify Bessel-like and Mathieu-like beams as practical candidates for blockage-resilient near-field communications.

physics.optics↗

arXiv2025

Multi-Purpose Architecture for Fast Reset and Protective Readout of Superconducting Qubits

The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes with the cost of reduced qubit protection from the environment. Here, we present a novel multi-purpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.

quant-ph↗

arXiv2022

Engineering superconducting qubits to reduce quasiparticles and charge noise

Identifying, quantifying, and suppressing decoherence mechanisms in qubits are important steps towards the goal of engineering a quantum computer or simulator. Superconducting circuits offer flexibility in qubit design; however, their performance is adversely affected by quasiparticles (broken Cooper pairs). Developing a quasiparticle mitigation strategy compatible with scalable, high-coherence devices is therefore highly desirable. Here we experimentally demonstrate how to control quasiparticle generation by downsizing the qubit, capping it with a metallic cover, and equipping it with suitable quasiparticle traps. Using a flip-chip design, we shape the electromagnetic environment of the qubit above the superconducting gap, inhibiting quasiparticle poisoning. Our findings support the hypothesis that quasiparticle generation is dominated by the breaking of Cooper pairs at the junction, as a result of photon absorption by the antenna-like qubit structure. We achieve record low charge-parity switching rate (<1Hz). Our aluminium devices also display improved stability with respect to discrete charging events.

quant-ph↗