Searcharxiv⌕ Search

arXiv subjects

Zhi Li

Publications and source records attributed to Zhi Li.

At least 361 records · Page 20Linked to original sources

New Vacuum Solar Telescope and Observations with High Resolution

The New Vacuum Solar Telescope (NVST) is a 1 meter vacuum solar telescope that aims to observe the fine structures on the Sun. The main tasks of NVST are high resolution imaging and spectral observations, including the measurements of solar magnetic field. NVST is the primary ground-based facility of Chinese solar community in this solar cycle. It is located by the Fuxian Lake of southwest China, where the seeing is good enough to perform high resolution observations. In this paper, we first introduce the general conditions of Fuxian Solar Observatory and the primary science cases of NVST. Then, the basic structures of this telescope and instruments are described in detail. Finally, some typical high resolution data of solar photosphere and chromosphere are also shown.

astro-ph.IM↗

Imaging the Electron-Boson Coupling in Superconducting FeSe

Scanning tunneling spectroscopy has been used to reveal signatures of a bosonic mode in the local quasiparticle density of states of superconducting FeSe films. The mode appears below Tc as a 'dip-hump' feature at energy Ω~ 4.7 kBTc beyond the superconducting gap Δ. Spectra on strained regions of the FeSe films reveal simultaneous decreases in Δand Ω. This contrasts with all previous reports on other high-Tc superconductors, where Δlocally anti-correlates with Ω. A local strong coupling model is found to reconcile the discrepancy well, and to provide a unified picture of the electron-boson coupling in unconventional superconductors.

cond-mat.supr-con↗

Dichotomy of Electronic Structure and Superconductivity between Single-Layer and Double-Layer FeSe/SrTiO3 Films

The latest discovery of possible high temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate, together with the observation of its unique electronic structure and nodeless superconducting gap, has generated much attention. Initial work also found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer FeSe/SrTiO3 film shows an insulating behavior. Such a dramatic difference between the single-layer and double-layer FeSe/SrTiO3 films is surprising and the underlying origin remains unclear. Here we report our comparative study between the single-layer and double-layer FeSe/SrTiO3 films by performing a systematic angle-resolved photoemission study on the samples annealed in vacuum. We find that, like the single-layer FeSe/SrTiO3 film, the as-prepared double-layer FeSe/SrTiO3 film is insulating and possibly magnetic, thus establishing a universal existence of the magnetic phase in the FeSe/SrTiO3 films. In particular, the double-layer FeSe/SrTiO3 film shows a quite different doping behavior from the single-layer film in that it is hard to get doped and remains in the insulating state under an extensive annealing condition. The difference originates from the much reduced doping efficiency in the bottom FeSe layer of the double-layer FeSe/SrTiO3 film from the FeSe-SrTiO3 interface. These observations provide key insights in understanding the origin of superconductivity and the doping mechanism in the FeSe/SrTiO3 films. The property disparity between the single-layer and double-layer FeSe/SrTiO3 films may facilitate to fabricate electronic devices by making superconducting and insulating components on the same substrate under the same condition.

cond-mat.supr-con↗

Electronic Evidence of an Insulator-Superconductor Transition in Single-Layer FeSe/SrTiO3 Films

In high temperature cuprate superconductors, it is now generally agreed that the parent compound is a Mott insulator and superconductivity is realized by doping the antiferromagnetic Mott insulator. In the iron-based superconductors, however, the parent compound is mostly antiferromagnetic metal, raising a debate on whether an appropriate starting point should go with an itinerant picture or a localized picture. It has been proposed theoretically that the parent compound of the iron-based superconductors may be on the verge of a Mott insulator, but so far no clear experimental evidence of doping-induced Mott transition has been available. Here we report an electronic evidence of an insulator-superconductor transition observed in the single-layer FeSe films grown on the SrTiO3 substrate. By taking angle-resolved photoemission measurements on the electronic structure and energy gap, we have identified a clear evolution of an insulator to a superconductor with the increasing doping. This observation represents the first example of an insulator-superconductor transition via doping observed in the iron-based superconductors. It indicates that the parent compound of the iron-based superconductors is in proximity of a Mott insulator and strong electron correlation should be considered in describing the iron-based superconductors.

cond-mat.supr-con↗

Streaming Video over HTTP with Consistent Quality

In conventional HTTP-based adaptive streaming (HAS), a video source is encoded at multiple levels of constant bitrate representations, and a client makes its representation selections according to the measured network bandwidth. While greatly simplifying adaptation to the varying network conditions, this strategy is not the best for optimizing the video quality experienced by end users. Quality fluctuation can be reduced if the natural variability of video content is taken into consideration. In this work, we study the design of a client rate adaptation algorithm to yield consistent video quality. We assume that clients have visibility into incoming video within a finite horizon. We also take advantage of the client-side video buffer, by using it as a breathing room for not only network bandwidth variability, but also video bitrate variability. The challenge, however, lies in how to balance these two variabilities to yield consistent video quality without risking a buffer underrun. We propose an optimization solution that uses an online algorithm to adapt the video bitrate step-by-step, while applying dynamic programming at each step. We incorporate our solution into PANDA -- a practical rate adaptation algorithm designed for HAS deployment at scale.

cs.NI↗

Baryon spectrum in a finite-temperature AdS/QCD model

We propose a model for baryons at finite temperature using AdS/QCD correspondence. In this model, we modify the AdS spacetime into the AdS-Schwarzchild spacetime and consider a couple of bulk spinors in this background. Solving this model, we get an eigenvalue equation for the baryon masses. We then investigate the effects of temperature on the baryon masses numerically, and find an interesting temperature dependence. Our result is consistent with the results from lattice QCD and other phenomenological models.

hep-ph↗

Direct observation of high temperature superconductivity in one-unit-cell FeSe films

Heterostructure based interface engineering has been proved an effective method for finding new superconducting systems and raising superconductivity transition temperature (TC). In previous work on one unit-cell (UC) thick FeSe films on SrTiO3 (STO) substrate, a superconducting-like energy gap as large as 20 meV, was revealed by in situ scanning tunneling microscopy/spectroscopy (STM/STS). Angle resolved photoemission spectroscopy (ARPES) further revealed a nearly isotropic gap of above 15 meV, which closes at a temperature of ~ 65 K. If this transition is indeed the superconducting transition, then the 1-UC FeSe represents the thinnest high TC superconductor discovered so far. However, up to date direct transport measurement of the 1-UC FeSe films has not been reported, mainly because growth of large scale 1-UC FeSe films is challenging and the 1-UC FeSe films are too thin to survive in atmosphere. In this work, we successfully prepared 1-UC FeSe films on insulating STO substrates with non-superconducting FeTe protection layers. By direct transport and magnetic measurements, we provide definitive evidence for high temperature superconductivity in the 1-UC FeSe films with an onset TC above 40 K and a extremely large critical current density JC ~ 1.7*106 A/cm2 at 2 K. Our work may pave the way to enhancing and tailoring superconductivity by interface engineering.

cond-mat.supr-con↗

Fully gapped topological surface states in Bi$_2$Se$_3$ films induced by a d-wave high-temperature superconductor

Topological insulators are a new class of materials, that exhibit robust gapless surface states protected by time-reversal symmetry. The interplay between such symmetry-protected topological surface states and symmetry-broken states (e.g. superconductivity) provides a platform for exploring novel quantum phenomena and new functionalities, such as 1D chiral or helical gapless Majorana fermions, and Majorana zero modes which may find application in fault-tolerant quantum computation. Inducing superconductivity on topological surface states is a prerequisite for their experimental realization. Here by growing high quality topological insulator Bi$_2$Se$_3$ films on a d-wave superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ using molecular beam epitaxy, we are able to induce high temperature superconductivity on the surface states of Bi$_2$Se$_3$ films with a large pairing gap up to 15 meV. Interestingly, distinct from the d-wave pairing of Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$, the proximity-induced gap on the surface states is nearly isotropic and consistent with predominant s-wave pairing as revealed by angle-resolved photoemission spectroscopy. Our work could provide a critical step toward the realization of the long sought-after Majorana zero modes.

cond-mat.supr-con↗

Probe and Adapt: Rate Adaptation for HTTP Video Streaming At Scale

Today, the technology for video streaming over the Internet is converging towards a paradigm named HTTP-based adaptive streaming (HAS). HAS comes with two unique flavors. First, by riding on top of HTTP/TCP, it leverages the network-friendly TCP to achieve firewall/NATS traversal and bandwidth sharing. Second, by pre-encoding and storing the video in a number of discrete bitrate levels, it introduces video bitrate adaptivity in a scalable way that the video encoding is excluded from the closed-loop adaptation. A conventional wisdom is that the TCP throughput observed by a HAS client indicates the available network bandwidth, thus can be used as a reliable reference for the video bitrate selection. We argue that this no longer holds true when HAS becomes a substantial fraction of the Internet traffic. We show that when multiple HAS clients compete at a network bottleneck, the presence of competing clients and the discrete nature of the video bitrates would together create confusion for a client to correctly perceive its fair-share bandwidth. Through analysis and real experiments, we demonstrate that this fundamental limitation would lead to, for example, video rate oscillation that negatively impacts the video watching experiences. We therefore argue that it is necessary to implement at the application layer a "probe-and-adapt" mechanism for HAS video rate adaptation, which is akin but orthogonal to the transport-layer network rate adaptation achieved by TCP. We present PANDA -- a client-side rate adaptation algorithm for HAS -- as an embodiment of this idea. Our testbed results show that compared to conventional algorithms, PANDA is able to reduce the instability of video rate by 60%, at a given risk of buffer underrun.

cs.NI↗

Mass acquisition of Dirac fermions in Cr-doped topological insulator Sb2Te3 films

We introduce time-reversal-symmetry breaking by doping Cr atoms into the topmost quintuple layer or into the bulk of Sb2Te3 thin films. We find that even at a high Cr-doping level the Landau level spectrum keeps a good quality, enabling the first demonstration of deviation of the zero-mode Landau level, induced by the acquisition of a mass term in the surface states in the presence of surface or bulk magnetic doping. The magnitude of the mass term in the surface states increases with increasing Cr-doping level. Our observation suggests Cr-doped Sb2Te3 is a promising candidate for the realization of the proposed novel magnetoelectric effects.

cond-mat.mtrl-sci↗

Spin Dynamics and Resonant Inelastic X-ray Scattering in Chromium with Commensurate Spin-Density Wave Order

We theoretically investigate spin dynamics and $L_3$-edge resonant inelastic X-ray scattering (RIXS) of Chromium with commensurate spin-density wave (SDW) order, based on a multi-band Hubbard model composed of 3$d$ and 4$s$ orbitals. Obtaining the ground state with the SDW mean-field approximation, we calculate the dynamical transverse and longitudinal spin susceptibility by using random-phase approximation. We find that a collective spin-wave excitation seen in inelastic neutron scattering hardly damps up to $\sim$0.6 eV. Above the energy, the excitation overlaps individual particle-hole excitations as expected, leading to broad spectral weight. On the other hand, the collective spin-wave excitation in RIXS spectra has a tendency to be masked by large spectral weight coming from particle-hole excitations with various orbital channels. This is in contrast with inelastic neutron scattering, where only selected diagonal orbital channels contribute to the spectral weight. However, it may be possible to detect the spin-wave excitation in RIXS experiments in the future if resolution is high enough.

cond-mat.str-el↗

Pressure Induced Ferromagnetism in Cubic Perovskite SrFeO3 and BaFeO3

The spin order in cubic perovskite SrFeO3 and BaFeO3 under high pressure is studied by density functional theory (DFT) calculation with local spin density approximation plus Hubbard U (LSDA+U). At ambient pressure, A-type and G-type helical spin orders are almost degenerate in BaFeO3 whose lattice constant is 3.97Å . When the lattice constant is reduced to 3.85 Å which is same as the lattice constant of SrFeO3 at ambient pressure, G-type helical spin order becomes stable, being consistent with SrFeO3. This is because superexchange interaction is enhanced as compared with double exchange interaction. Phase transition from helical spin state to ferromagnetic state in both SrFeO3 and BaFeO3 takes place if the lattice constant is further reduced to 3.70 Å. This is because reduced local spin moment weakens the contribution from superexchange interaction. Our result agrees with recent experimental result of BaFeO3 under high pressure. Additionally, our calculation predicts that half-metal BaFeO3 at ambient pressure will become a good metal under high pressure

cond-mat.str-el↗

Phase Diagram and High Temperature Superconductivity at 65 K in Tuning Carrier Concentration of Single-Layer FeSe Films

Superconductivity in the cuprate superconductors and the Fe-based superconductors is realized by doping the parent compound with charge carriers, or by application of high pressure, to suppress the antiferromagnetic state. Such a rich phase diagram is important in understanding superconductivity mechanism and other physics in the Cu- and Fe-based high temperature superconductors. In this paper, we report a phase diagram in the single-layer FeSe films grown on SrTiO3 substrate by an annealing procedure to tune the charge carrier concentration over a wide range. A dramatic change of the band structure and Fermi surface is observed, with two distinct phases identified that are competing during the annealing process. Superconductivity with a record high transition temperature (Tc) at ~65 K is realized by optimizing the annealing process. The wide tunability of the system across different phases, and its high-Tc, make the single-layer FeSe film ideal not only to investigate the superconductivity physics and mechanism, but also to study novel quantum phenomena and for potential applications.

cond-mat.supr-con↗

KFe_2Se_2 is the parent compound of K-doped iron selenide superconductors

We elucidate the existing controversies in the newly discovered K-doped iron selenide (KxFe2-ySe2-z) superconductors. The stoichiometric KFe2Se2 with \surd2\times\surd2 charge ordering was identified as the parent compound of KxFe2-ySe2-z superconductor using scanning tunneling microscopy and spectroscopy. The superconductivity is induced in KFe2Se2 by either Se vacancies or interacting with the anti-ferromagnetic K2Fe4Se5 compound. Totally four phases were found to exist in KxFe2-ySe2-z: parent compound KFe2Se2, superconducting KFe2Se2 with \surd2\times\surd5 charge ordering, superconducting KFe2Se2-z with Se vacancies and insulating K2Fe4Se5 with \surd5\times\surd5 Fe vacancy order. The phase separation takes place at the mesoscopic scale under standard molecular beam epitaxy condition.

cond-mat.supr-con↗

First Principles Calculation of Helical Spin Order in Iron Perovskite SrFeO3 and BaFeO3

Motivated by recent discovery of ferromagnetism in cubic perovskite BaFeO3 under small magnetic field, we investigate spin order in BaFeO3 and isostructual SrFeO3 by the first principles calculation. The on-site Coulomb and exchange interactions are necessary for the helical spin order consistent with experiments. SrFeO3 exhibits stable G-type helical order, while A- and G-type helical orders in BaFeO3 are almost degenerate at short propagating vector with tiny energetic barrier with respect to ferromagnetic spin order, explaining ferromagnetism under small field. The results are consistent with model calculation where negative charge-transfer energy is explicitly taken into account.

cond-mat.str-el↗

Electronic Origin of High Temperature Superconductivity in Single-Layer FeSe Superconductor

The latest discovery of high temperature superconductivity signature in single-layer FeSe is significant because it is possible to break the superconducting critical temperature ceiling (maximum Tc~55 K) that has been stagnant since the discovery of Fe-based superconductivity in 2008. It also blows the superconductivity community by surprise because such a high Tc is unexpected in FeSe system with the bulk FeSe exhibiting a Tc at only 8 K at ambient pressure which can be enhanced to 38 K under high pressure. The Tc is still unusually high even considering the newly-discovered intercalated FeSe system A_xFe_{2-y}Se_2 (A=K, Cs, Rb and Tl) with a Tc at 32 K at ambient pressure and possible Tc near 48 K under high pressure. Particularly interesting is that such a high temperature superconductivity occurs in a single-layer FeSe system that is considered as a key building block of the Fe-based superconductors. Understanding the origin of high temperature superconductivity in such a strictly two-dimensional FeSe system is crucial to understanding the superconductivity mechanism in Fe-based superconductors in particular, and providing key insights on how to achieve high temperature superconductivity in general. Here we report distinct electronic structure associated with the single-layer FeSe superconductor. Its Fermi surface topology is different from other Fe-based superconductors; it consists only of electron pockets near the zone corner without indication of any Fermi surface around the zone center. Our observation of large and nearly isotropic superconducting gap in this strictly two-dimensional system rules out existence of node in the superconducting gap. These results have provided an unambiguous case that such a unique electronic structure is favorable for realizing high temperature superconductivity.

cond-mat.supr-con↗

Interface induced high temperature superconductivity in single unit-cell FeSe films on SrTiO3

Searching for superconducting materials with high transition temperature (TC) is one of the most exciting and challenging fields in physics and materials science. Although superconductivity has been discovered for more than 100 years, the copper oxides are so far the only materials with TC above 77 K, the liquid nitrogen boiling point. Here we report an interface engineering method for dramatically raising the TC of superconducting films. We find that one unit-cell (UC) thick films of FeSe grown on SrTiO3 (STO) substrates by molecular beam epitaxy (MBE) show signatures of superconducting transition above 50 K by transport measurement. A superconducting gap as large as 20 meV of the 1 UC films observed by scanning tunneling microcopy (STM) suggests that the superconductivity could occur above 77 K. The occurrence of superconductivity is further supported by the presence of superconducting vortices under magnetic field. Our work not only demonstrates a powerful way for finding new superconductors and for raising TC, but also provides a well-defined platform for systematic study of the mechanism of unconventional superconductivity by using different superconducting materials and substrates.

cond-mat.supr-con↗

Reactive processing of formaldehyde and acetaldehyde in aqueous aerosol mimics: Surface tension depression and secondary organic products

The reactive uptake of carbonyl-containing volatile organic compounds (cVOCs) by aqueous atmospheric aerosols is a likely source of particulate organic material. The aqueous-phase secondary organic products of some cVOCs are surface-active. Therefore, cVOC uptake can lead to organic film formation at the gas-aerosol interface and changes in aerosol surface tension. We examined the chemical reactions of two abundant cVOCs, formaldehyde and acetaldehyde, in water and aqueous ammonium sulfate (AS) solutions mimicking tropospheric aerosols. Secondary organic products were identified using Aerosol Chemical Ionization Mass Spectrometry (Aerosol-CIMS), and changes in surface tension were monitored using pendant drop tensiometry. Hemiacetal oligomers and aldol condensation products were identified using Aerosol-CIMS. Acetaldehyde depresses surface tension to 65(\pm2) dyn/cm in pure water (a 10% surface tension reduction from that of pure water) and 62(\pm1) dyn/cm in AS solutions (a 20.6% reduction from that of a 3.1 M AS solution). Surface tension depression by formaldehyde in pure water is negligible; in AS solutions, a 9% reduction in surface tension is observed. Mixtures of these species were also studied in combination with methylglyoxal in order to evaluate the influence of cross-reactions on surface tension depression and product formation in these systems. We find that surface tension depression in the solutions containing mixed cVOCs exceeds that predicted by an additive model based on the single-species isotherms.

physics.ao-ph↗