Searcharxiv⌕ Search

arXiv subjects

Zhi-Xin Guo

Publications and source records attributed to Zhi-Xin Guo.

33 records · Page 2Linked to original sources

Stacking and Thickness Effects on Cross-Plane Thermal Conductivity of Hexagonal Boron Nitride

Recently, the in-plane thermal transport in van der Waals (vdW) materials such as graphene, hexagonal boron nitride (h-BN), and transition metal dichalcogenides (TMDs) has been widely studied. Whereas, the cross-plane one is far from sufficient. Based on the non-equilibrium molecular dynamics simulations and Boltzmann transport equation, here we reveal the stacking and thickness effects on the cross-plane thermal conductivity (K) of h-BN. We find that K can be significantly modulated by both the stacking structure and thickness (d) of h-BN, which is unexpected from the viewpoint of its smooth in-plane structure and weak interlayer interaction. In the small thickness region (d<6 nm), K of h-BN at room temperature significantly increases with thickness, following a power law of K ~ d^b with b=0.84, 0.66, and 0.92 for AA', AB, and AB' stacking structures, respectively. Moreover, K of AB' structure reaches up to 60% larger than that of AA' and AB structures with d=5.3 nm, showing the remarkable stacking effect. We also find that the stacking effect on K changes dramatically with d increasing, where AA' stacking has the largest K with d > 200 nm. We finally clarify that such exotic stacking and thickness dependence of K is owing to the competing effect of excited number of phonons and phonon relaxation time, both of which directly affect the thermal conductivity. Our findings may provide new insights into the cross-plane thermal management in vdW materials.

cond-mat.mtrl-sci↗

Giant twist-angle dependence of thermal conductivity in bilayer graphene originating from strong interlayer coupling

Recently, the twist-angle effect on 2D van der Walls (vdW) materials, such as bilayer graphene, has attracted great attention. Many novel electronic, magnetic and even optical properties induced by such effect have been discovered. However, the twist-angle effect on phononic property is not so remarkable. By investigating the thermal conductivity of twist bilayer graphene (TBG), here we reveal that the trivial twist-angle effect on phononic property observed in previous studies is owing to the non-localization nature of phonons. This characteristic makes phonons hardly trapped by the weak interlayer potentials induced by the twist-angle dependent Moiré pattern. We propose that the twist-angle effect can be effectively enhanced by increasing the interface coupling. In use of a sandwich structure composed of h-BN and TBG, we demonstrate that the thermal conductivity of TBG can be either significantly increased or dramatically decreased, under the synergistic modulation of interlayer coupling strength and twist angle. Particularly, the twist-angle effect can lead to a nontrivial reduction of thermal conductivity up to 78% when a strong interlayer coupling is applied. The reduction is several times larger than that observed in the freestanding TBG where the reduction is attributed to the twist-angle dependent phonon scatterings induced by the edge phonons. The underlying mechanism for the giant twist-angle dependence of thermal conductivity is further revealed on the basis of phonon transport theory. Our findings provide a platform for achieving efficient twist-angle modulation on phonon transport property of vdW materials.

cond-mat.mes-hall↗

Unusual anisotropic magnetoresistance due to magnetization-dependent spin-orbit interactions

One of recent surprising discoveries is the unusual anisotropic magnetoresistance (UAMR) that depends on two magnetization components perpendicular to the current differently, in contrast to the conventional anisotropic magnetoresistance (AMR) that predicts no change in resistance when the magnetization varies in the plane perpendicular to the current. Using density functional theory and Boltzmann transport equation calculations for bcc Fe, hcp Co, and bcc FeCo alloys, we show that UAMR can be accounted by the magnetization-dependent spin-orbit interactions (SOI): Magnetization-dependent SOI modifies electron energy bands that, in turn, changes resistance. A phenomenological model reveals the intrinsic connection between SOI and order-parameters. Such a mechanism is confirmed by the strong biaxial stain effect on UAMR. Our findings provide an efficient way of searching and optimizing materials with large UAMR, important in the design of high-performance spintronic devices.

cond-mat.mes-hall↗

Intrinsic anomalous spin Hall effect

Charge-spin interconversion in magnetic materials is investigated by using first-principles calculations. In addition to the conventional spin Hall effect (SHE) that requires mutual orthogonality of the charge current, spin-flow direction, and spin polarization, the recently proposed anomalous SHE (ASHE) is confirmed in Mn2Au and WTe2. The interaction of the order parameter with conduction electrons leads to sizeable nonzero spin Berry curvatures that give rise to nonzero anomalous spin Hall conductivity (ASHC). Our calculations show that the ASHE is intrinsic and originates from the order-parameter-controlled spin-orbit interaction, which generates an extra anomalous effective field. A useful relationship among the order parameter, spin Berry curvature and ASHC is revealed. Our findings open a new avenue for arbitrary-type spin current generation and detection.

cond-mat.mtrl-sci↗

Quantum Anomalous Hall and Valley Quantum Anomalous Hall Effects in Two-Dimensional d0 Orbital XY Monolayers

We propose a new family of the d0 orbital XY (X = K, Rb, Cs; Y = N, P, As, Sb, Bi) monolayers with abundant and novel topology and valley properties. The KN, RbN, RbP, RbAs, CsP, CsAs, and CsSb monolayers possess remarkable quantum anomalous Hall effect (QAHE). CsSb monolayer also exhibits extraordinary valley QAHE with giant splitting. Moreover, the topological properties of XY monolayers can be effciently tuned by the in-plane strain, owing to the strain-induced band inversion between the px;y and pz orbitals. Our findings suggest that the d0 orbital XY monolayers can be good candidates for promising applications in the spintronics and multifunctional topological-based devices.

cond-mat.mtrl-sci↗

Intriguing Magnetoelectric Effect in Two-dimensional Ferromagnetic/Perovskite Oxide Ferroelectric Heterostructure

Two-dimensional (2D) magnets have broad application prospects in the spintronics, but how to effectively control them with a small electric field is still an issue. Here we propose that 2D magnets can be efficiently controlled in a multiferroic heterostructure composed of 2D magnetic material and perovskite oxide ferroelectric (POF) whose dielectric polarization is easily flipped under a small electric field. We illustrate the feasibility of such strategy in the bilayer CrI3/BiFeO3(001) heterostructure by using the first-principles calculations. Different from the traditional POF multiferroic heterostructures which have strong interface interactions, we find that the interface interaction between CrI3 and BiFeO3(001) is van der Waals type. Whereas, the heterostructure has particular strong magnetoelectric coupling where the bilayer CrI3 can be efficiently switched between ferromagnetic and antiferromagnetic types by the polarized states of BiFeO3(001). We also discover the competing effect between electron doping and the additional electric field on the interlayer exchange coupling interaction of CrI3, which is responsible to the magnetic phase transition. Our results provide a new avenue for the tuning of 2D magnets with a small electric field.

cond-mat.mes-hall↗

Exotic spintronic properties of transition-metal monolayers on graphyne

The recent discovery of two-dimensional (2D) magnetic materials which are compound of transition metal (TM) with other elements, has opened new avenues for basic research on low-dimensional magnetism and potential applications in spintronics. To further explore new 2D magnets of pure TM is thus of an interesting topic. Based on the first-principles calculations, here we propose a strategy of obtaining monolayer TM magnets, i.e., depositing TM atoms on graphyne (Gy) which has proper hexagonal hollow geometry. We find that TM monolayer with perfect hexagonal geometry can be formed on Gy. The TM monolayer exhibits a wealth of physical properties in dependence of TM species, such as ferromagnetic and antiferromagnetic ground states, as well as intriguing semimetal and half-metal characteristics. We also find that the half-metal characteristics makes the monolayer TM have great potential applications in the horizontal magnetic tunnel junction (MTJ) devices, where the tunneling magnetoresistance can reach as high as 850000%. Our results provide a new framework for obtaining 2D magnets with outstanding spintronic properties.

cond-mat.mes-hall↗

Promising Properties of Sub-5 nm Monolayer MoSi2N4 Transistor

Two-dimensional (2D) semiconductors have attracted tremendous interests as natural passivation and atomically thin channels that could facilitate continued transistor scaling. However, air-stable 2D semiconductors with high performance were quite elusive. Recently, extremely air-stable MoSi2N4 monolayer had been successfully fabricated [Hong et al., Science 369, 670 (2020)]. To further reveal its potential applications in the sub-5 nm MOSFETs, there is an urgent need to develop integrated circuits. Here we report first-principles quantum transport simulations on the performance limits of n- and p-type sub-5 nm monolayer (ML) MoSi2N4 metal-oxide-semiconductor FETs (MOSFETs). We find that the on-state current in the MoSi2N4 MOSFETs can be effectively manipulated by the length of gate and underlap (UL), as well as the doping concentration. Very strikingly, we also find that the n-type devices the optimized on-state current can reach up to 1390 and 1025 uA/um for the high performance (HP) and low power (LP) applications, respectively, both of which satisfy the International Technology Roadmap for Semiconductors (ITRS) requirements. Whereas, the optimized on-state current can meet the LP application (348 uA/um) for the p-type devices. Finally, we find that the MoSi2N4 MOSFETs have ultra-low subthreshold swing and power delay product, which have potential to realize the high speed and low power consumption devices. Our results show that MoSi2N4 is an ideal 2D channel material for future competitive ultrascaled devices.

cond-mat.mes-hall↗

New approach for fabrication germanene with Dirac electrons preserved: A first principle study

How to obtain germanene with Dirac electrons preserved is still an open challenge. Here we report a sandwich-dehydrogenation approach, i.e., to fabricate germanene through dehydrogenating germanane in a sandwiched structure. The dehydrogenation can spontaneously occur for the sandwiched structure, which overcomes the problem of amorphization in the heating dehydrogenation approach. The obtained germanene preserve the Dirac electronic properties very well. Moreover, the Fermi velocity of germanene can be efficiently manipulated through controlling the interlayer spacing between germanane and the sandwiching surfaces. Our results indicate a guideline for fabrication of prefect two-dimensional materials.

cond-mat.mes-hall↗

Structural Evolution and Optoelectronic Applications of Multilayer Silicene

Despite the recent progress on two-dimensional multilayer materials (2DMM) with weak interlayer interactions, the investigation on 2DMM with strong interlayer interactions is far from its sufficiency. Here we report on first-principles calculations that clarify the structural evolution and optoelectronic properties of such a 2DMM, multilayer silicene. With our newly developed global optimization algorithm, we discover the existence of rich dynamically stable multilayer silicene phases, the stability of which is closely related to the extent of sp3 hybridization that can be evaluated by the average bonds and effective bond angles. The stable Si(111) surface structures are obtained when the silicene thickness gets up to four, showing the critical thickness for the structural evolution. We also find that the multilayer silicene with pi-bonded surfaces present outstanding optoelectronic properties for the solar cells and optical fiber communications due to the incorporation of sp2-type bonds in the sp3-type bonds dominated system. This study is helpful to complete the picture of structure and related property evolution of 2DMM with strong interlayer interactions.

cond-mat.mes-hall↗

Crossover between Silicene and Ultra-Thin Si Atomic Layers on Ag(111) Surfaces

We report on total-energy electronic structure calculations in the density-functional theory performed for the ultra-thin atomic layers of Si on Ag(111) surfaces. We find several distinct stable silicene structures: $\sqrt{3}\times\sqrt{3}$, $3\times3$, $\sqrt{7}\times\sqrt{7}$ with the thickness of Si increasing from monolayer to quad-layer. The structural bistability and tristability of the multilayer silicene structures on Ag surfaces are obtained, where the calculated transition barriers infer the occurrence of the flip-flop motion at low temperature. The calculated STM images agree well with the experimental observations. We also find the stable existence of $2\times1$ $π$-bonded chain and $7\times7$ dimer-adatom-stacking fault Si(111)-surface structures on Ag(111), which clearly shows the crossover of silicene-silicon structures for the multilayer Si on Ag surfaces. We further find the absence of the Dirac states for multilayer silicene on Ag(111) due to the covalent interactions of silicene-Ag interface and Si-Si interlayer. Instead, we find a new state near Fermi level composed of $π$ orbitals locating on the surface layer of $\sqrt{3}\times\sqrt{3}$ multilayer silicene, which satisfies the hexagonal symmetry and exhibits the linear energy dispersion. By examining the electronic properties of $2\times1$ $π$-bonded chain structures, we find that the surface-related $π$ states of multilayer Si structures are robust on Ag surfaces.

cond-mat.mes-hall↗

Structural Tristability and Deep Dirac States in Bilayer Silicene on Ag(111) Surfaces

We report on total-energy electronic-structure calculations in the density-functional theory performed for both monolayer and bilayer silicene on Ag(111) surfaces. The rt3 x rt3 structure observed experimentally and argued to be the monolayer silicene in the past [Chen et al., Phys. Rev. Lett. 110, 085504 (2013)] is identified as the bilayer silicene on the Ag(111) surface. The identification is based on our accurate density-functional calculations in which three approximations, the local density approximation, the generalized-gradient approximation, and the van-der-Waals-density-functional approximation, to the exchange-correlation energy have been carefully examined. We find that the structural tristability exists for the rt3 x rt3 bilayer silicene. The calculated energy barriers among the three stable structures are in the range of 7 - 9 meV per Si atom, indicating possible flip-flop motions among the three. We have found that the flip-flop motion between the two of the three structures produces the honeycomb structure in the STM images, whereas the motion among the three does the 1 x 1 structure. We have found that the electron states which effectively follow Dirac equation in the freestanding silicene couple with the substrate Ag orbitals due to the bond formation, and shift downwards deep in the valence bands. This feature is common to all the stable or metastable silicene layer on the Ag(111) substrate.

cond-mat.mes-hall↗

Absence of Dirac Electrons in Silicene on Ag (111) Surfaces

We report first-principles calculations that clarify stability and electronic structures of silicene on Ag(111) surfaces. We find that several stable structures exist for silicene/Ag(111), exhibiting a variety of images of scanning tunneling microscopy. We also find that Dirac electrons are {\em absent} near Fermi energy in all the stable structures due to buckling of the Si monolayer and mixing between Si and Ag orbitals. We instead propose that either BN substrate or hydrogen processing of Si surface is a good candidate to preserve Dirac electrons in silicene.

cond-mat.mes-hall↗

Thermal conductivity of epitaxial graphene nanoribbons on SiC: effect of substrate

We study the effect of SiC substrate on thermal conductivity of epitaxial graphene nanoribbons (GNRs) using the nonequilibrium molecular dynamics method. We show that the substrate has strong interaction with single-layer GNRs during the thermal transport, which largely reduces the thermal conductivity. The thermal conductivity characteristics of suspended GNRs are well preserved in the second GNR layers of bilayer GNR, which has a weak van der Waals interaction with the underlying structures. The out-of-plane phonon mode is found to play a critical role on the thermal conductivity variation of the second GNR layer induced by the underlying structures.

cond-mat.mes-hall↗

Layer and size dependence of thermal conductivity in multilayer graphene nanoribbons

Using non-equilibrium molecular dynamics method(NEMD), we have found that the thermal conductivity of multilayer graphene nanoribbons monotonously decreases with the increase of the number of layers, such behavior can be attributed to the phonon resonance effect of out-of-plane phonon modes. The reduction of thermal conductivity is found to be proportional to the layer size, which is caused by the increase of phonon resonance. Our results are in agreement with recent experiment on dimensional evolution of thermal conductivity in few layer graphene.

cond-mat.mes-hall↗