Searcharxiv⌕ Search

arXiv subjects

Zhiqiang Wei

Publications and source records attributed to Zhiqiang Wei.

At least 73 records · Page 4Linked to original sources

Black-Box Quantum State Preparation with Inverse Coefficients

Black-box quantum state preparation is a fundamental building block for many higher-level quantum algorithms, which is applied to transduce the data from computational basis into amplitude. Here we present a new algorithm for performing black-box state preparation with inverse coefficients based on the technique of inequality test. This algorithm can be used as a subroutine to perform the controlled rotation stage of the Harrow-Hassidim-Lloyd (HHL) algorithm and the associated matrix inversion algorithms with exceedingly low cost. Furthermore, we extend this approach to address the general black-box state preparation problem where the transduced coefficient is a general non-linear function. The present algorithm greatly relieves the need to do arithmetic and the error is only resulted from the truncated error of binary string. It is expected that our algorithm will find wide usage both in the NISQ and fault-tolerant quantum algorithms.

quant-ph↗

Faster-than-Nyquist Asynchronous NOMA Outperforms Synchronous NOMA

Faster-than-Nyquist (FTN) signaling aided non-orthogonal multiple access (NOMA) is conceived and its achievable rate is quantified in the presence of random link delays of the different users. We reveal that exploiting the link delays may potentially lead to a signal-to-interference-plus-noise ratio (SINR) gain, while transmitting the data symbols at FTN rates has the potential of increasing the degree-of-freedom (DoF). We then unveil the fundamental trade-off between the SINR and DoF. In particular, at a sufficiently high symbol rate, the SINR gain vanishes while the DoF gain achieves its maximum, where the achievable rate is almost $(1+β)$ times higher than that of the conventional synchronous NOMA transmission in the high signal-to-noise ratio (SNR) regime, with $β$ being the roll-off factor of the signaling pulse. Our simulation results verify our analysis and demonstrate considerable rate improvements over the conventional power-domain NOMA scheme.

cs.IT↗

Quantum-inspired Complex Convolutional Neural Networks

Quantum-inspired neural network is one of the interesting researches at the junction of the two fields of quantum computing and deep learning. Several models of quantum-inspired neurons with real parameters have been proposed, which are mainly used for three-layer feedforward neural networks. In this work, we improve the quantum-inspired neurons by exploiting the complex-valued weights which have richer representational capacity and better non-linearity. We then extend the method of implementing the quantum-inspired neurons to the convolutional operations, and naturally draw the models of quantum-inspired convolutional neural networks (QICNNs) capable of processing high-dimensional data. Five specific structures of QICNNs are discussed which are different in the way of implementing the convolutional and fully connected layers. The performance of classification accuracy of the five QICNNs are tested on the MNIST and CIFAR-10 datasets. The results show that the QICNNs can perform better in classification accuracy on MNIST dataset than the classical CNN. More learning tasks that our QICNN can outperform the classical counterparts will be found.

quant-ph↗

Beamforming Design for Intelligent Reflecting Surface-Enhanced Symbiotic Radio Systems

This paper investigates multiuser multi-input single-output downlink symbiotic radio communication systems assisted by an intelligent reflecting surface (IRS). Different from existing methods ideally assuming the secondary user (SU) can jointly decode information symbols from both the access point (AP) and the IRS via multiuser detection, we consider a more practical SU that only non-coherent detection is available. To characterize the non-coherent decoding performance, a practical upper bound of the average symbol error rate (SER) is derived. Subsequently, we jointly optimize the beamformer at the AP and the phase shifts at the IRS to maximize the average sum-rate of the primary system taking into account the maximum tolerable SER constraint for the SU. To circumvent the couplings of variables, we exploit the Schur complement that facilitates the design of a suboptimal beamforming algorithm based on successive convex approximation. Our simulation results show that compared with various benchmark algorithms, the proposed scheme significantly improves the average sum-rate of the primary system, while guaranteeing the decoding performance of the secondary system.

cs.IT↗

Resource Allocation for Simultaneous Wireless Information and Power Transfer Systems: A Tutorial Overview

Over the last decade, simultaneous wireless information and power transfer (SWIPT) has become a practical and promising solution for connecting and recharging battery-limited devices, thanks to significant advances in low-power electronics technology and wireless communications techniques. To realize the promised potentials, advanced resource allocation design plays a decisive role in revealing, understanding, and exploiting the intrinsic rate-energy tradeoff capitalizing on the dual use of radio frequency (RF) signals for wireless charging and communication. In this paper, we provide a comprehensive tutorial overview of SWIPT from the perspective of resource allocation design. The fundamental concepts, system architectures, and RF energy harvesting (EH) models are introduced. In particular, three commonly adopted EH models, namely the linear EH model, the nonlinear saturation EH model, and the nonlinear circuit-based EH model are characterized and discussed. Then, for a typical wireless system setup, we establish a generalized resource allocation design framework which subsumes conventional resource allocation design problems as special cases. Subsequently, we elaborate on relevant tools from optimization theory and exploit them for solving representative resource allocation design problems for SWIPT systems with and without perfect channel state information (CSI) available at the transmitter, respectively. The associated technical challenges and insights are also highlighted. Furthermore, we discuss several promising and exciting future research directions for resource allocation design for SWIPT systems intertwined with cutting-edge communication technologies, such as intelligent reflecting surfaces, unmanned aerial vehicles, mobile edge computing, federated learning, and machine learning.

cs.IT↗

Safeguarding UAV Networks Through Integrated Sensing, Jamming, and Communications

This paper proposes an integrated sensing, jamming, and communications (ISJC) framework for securing unmanned aerial vehicle (UAV)-enabled wireless networks. The proposed framework advocates the dual use of artificial noise transmitted by an information UAV for simultaneous jamming and sensing of an eavesdropping UAV. Based on the information sensed in the previous time slot, an optimization problem for online resource allocation design is formulated to maximize the number of securely served users in the current time slot, while taking into account a tracking performance constraint and quality-of-service (QoS) requirements regarding the leakage information rate to the eavesdropper and the downlink data rate to the legitimate users. A channel correlation-based algorithm is proposed to obtain a suboptimal solution for the design problem. Simulation results demonstrate the security benefits of integrating sensing into UAV communication systems.

cs.IT↗

A Novel ISAC Transmission Framework based on Spatially-Spread Orthogonal Time Frequency Space Modulation

In this paper, we propose a novel integrated sensing and communication (ISAC) transmission framework based on the spatially-spread orthogonal time frequency space (SS-OTFS) modulation by considering the fact that communication channel strengths cannot be directly obtained from radar sensing. We first propose the concept of SS-OTFS modulation, where the key novelty is the angular domain discretization enabled by the spatial-spreading/de-spreading. This discretization gives rise to simple and insightful effective models for both radar sensing and communication, which result in simplified designs for the related estimation and detection problems. In particular, we design simple beam tracking, angle estimation, and power allocation schemes for radar sensing, by utilizing the special structure of the effective radar sensing matrix. Meanwhile, we provide a detailed analysis on the pair-wise error probability (PEP) for communication, which unveils the key conditions for both precoding and power allocation designs. Based on those conditions, we design a symbol-wise precoding scheme for communication based only on the delay, Doppler, and angle estimates from radar sensing, without the a priori knowledge of the communication channel fading coefficients, and also introduce the power allocation for communication. Furthermore, we notice that radar sensing and communication requires different power allocations. Therefore, we discuss the performances of both the radar sensing and communication with different power allocations and show that the power allocation should be designed leaning towards radar sensing in practical scenarios. The effectiveness of the proposed ISAC transmission framework is verified by our numerical results, which also agree with our analysis and discussions.

cs.IT↗

Optimization and Noise Analysis of the Quantum Algorithm for Solving One-Dimensional Poisson Equation

Solving differential equations is one of the most promising applications of quantum computing. Recently we proposed an efficient quantum algorithm for solving one-dimensional Poisson equation avoiding the need to perform quantum arithmetic or Hamiltonian simulation. In this letter, we further develop this algorithm to make it closer to the real application on the noisy intermediate-scale quantum (NISQ) devices. To this end, we first develop a new way of performing the sine transformation, and based on it the algorithm is optimized by reducing the depth of the circuit from n2 to n. Then, we analyze the effect of common noise existing in the real quantum devices on our algorithm using the IBM Qiskit toolkit. We find that the phase damping noise has little effect on our algorithm, while the bit flip noise has the greatest impact. In addition, threshold errors of the quantum gates are obtained to make the fidelity of the circuit output being greater than 90%. The results of noise analysis will provide a good guidance for the subsequent work of error mitigation and error correction for our algorithm. The noise-analysis method developed in this work can be used for other algorithms to be executed on the NISQ devices.

quant-ph↗

Robust and Secure Sum-Rate Maximization for Multiuser MISO Downlink Systems with Self-sustainable IRS

This paper investigates robust and secure multiuser multiple-input single-output (MISO) downlink communications assisted by a self-sustainable intelligent reflection surface (IRS), which can simultaneously reflect and harvest energy from the received signals. We study the joint design of beamformers at an access point (AP) and the phase shifts as well as the energy harvesting schedule at the IRS for maximizing the system sum-rate. The design is formulated as a non-convex optimization problem taking into account the wireless energy harvesting capability of IRS elements, secure communications, and the robustness against the impact of channel state information (CSI) imperfection. Subsequently, we propose a computationally-efficient iterative algorithm to obtain a suboptimal solution to the design problem. In each iteration, S-procedure and the successive convex approximation are adopted to handle the intermediate optimization problem. Our simulation results unveil that: 1) there is a non-trivial trade-off between the system sum-rate and the self-sustainability of the IRS; 2) the performance gain achieved by the proposed scheme is saturated with a large number of energy harvesting IRS elements; 3) an IRS equipped with small bit-resolution discrete phase shifters is sufficient to achieve a considerable system sum-rate of the ideal case with continuous phase shifts.

cs.IT↗

Fast Black-Box Quantum State Preparation Based on Linear Combination of Unitaries

Black-box quantum state preparation is a fundamental primitive in quantum algorithms. Starting from Grover, a series of techniques have been devised to reduce the complexity. In this work, we propose to perform black-box state preparation using the technique of linear combination of unitaries (LCU). We provide two algorithms based on a different structure of LCU. Our algorithms improve upon the existed best results by reducing the required additional qubits and Toffoli gates to 2log(n) and n, respectively, in the bit precision n. We demonstrate the algorithms using the IBM Quantum Experience cloud services. The further reduced complexity of the present algorithms brings the black-box quantum state preparation closer to reality.

quant-ph↗

Integrated Sensing and Communication-assisted Orthogonal Time Frequency Space Transmission for Vehicular Networks

Orthogonal time frequency space (OTFS) modulation is a promising candidate for supporting reliable information transmission in high-mobility vehicular networks. In this paper, we consider the employment of the integrated (radar) sensing and communication (ISAC) technique for assisting OTFS transmission in both uplink and downlink vehicular communication systems. Benefiting from the OTFS-ISAC signals, the roadside unit (RSU) is capable of simultaneously transmitting downlink information to the vehicles and estimating the sensing parameters of vehicles, e.g., locations and speeds, based on the reflected echoes. Then, relying on the estimated kinematic parameters of vehicles, the RSU can construct the topology of the vehicular network that enables the prediction of the vehicle states in the following time instant. Consequently, the RSU can effectively formulate the transmit downlink beamformers according to the predicted parameters to counteract the channel adversity such that the vehicles can directly detect the information without the need of performing channel estimation. As for the uplink transmission, the RSU can infer the delays and Dopplers associated with different channel paths based on the aforementioned dynamic topology of the vehicular network. Thus, inserting guard space as in conventional methods are not needed for uplink channel estimation which removes the required training overhead. Finally, an efficient uplink detector is proposed by taking into account the channel estimation uncertainty. Through numerical simulations, we demonstrate the benefits of the proposed ISAC-assisted OTFS transmission scheme.

eess.SP↗

Deep Learning-Empowered Predictive Beamforming for IRS-Assisted Multi-User Communications

The realization of practical intelligent reflecting surface (IRS)-assisted multi-user communication (IRS-MUC) systems critically depends on the proper beamforming design exploiting accurate channel state information (CSI). However, channel estimation (CE) in IRS-MUC systems requires a significantly large training overhead due to the numerous reflection elements involved in IRS. In this paper, we adopt a deep learning approach to implicitly learn the historical channel features and directly predict the IRS phase shifts for the next time slot to maximize the average achievable sum-rate of an IRS-MUC system taking into account the user mobility. By doing this, only a low-dimension multiple-input single-output (MISO) CE is needed for transmit beamforming design, thus significantly reducing the CE overhead. To this end, a location-aware convolutional long short-term memory network (LA-CLNet) is first developed to facilitate predictive beamforming at IRS, where the convolutional and recurrent units are jointly adopted to exploit both the spatial and temporal features of channels simultaneously. Given the predictive IRS phase shift beamforming, an instantaneous CSI (ICSI)-aware fully-connected neural network (IA-FNN) is then proposed to optimize the transmit beamforming matrix at the access point. Simulation results demonstrate that the sum-rate performance achieved by the proposed method approaches that of the genie-aided scheme with the full perfect ICSI.

cs.IT↗

Orthogonal Time-Frequency Space Modulation: A Promising Next-Generation Waveform

The sixth-generation (6G) wireless networks are envisioned to provide a global coverage for the intelligent digital society of the near future, ranging from traditional terrestrial to non-terrestrial networks, where reliable communications in high-mobility scenarios at high carrier frequencies would play a vital role. In such scenarios, the conventional orthogonal frequency division multiplexing (OFDM) modulation, that has been widely used in both the fourth-generation (4G) and the emerging fifth-generation (5G) cellular systems as well as in WiFi networks, is vulnerable to severe Doppler spread. In this context, this article aims to introduce a recently proposed two-dimensional modulation scheme referred to as orthogonal time-frequency space (OTFS) modulation, which conveniently accommodates the channel dynamics via modulating information in the delay-Doppler domain. This article provides an easy-reading overview of OTFS, highlighting its underlying motivation and specific features. The critical challenges of OTFS and our preliminary results are presented. We also discuss a range of promising research opportunities and potential applications of OTFS in 6G wireless networks.

cs.IT↗

Performance Analysis and Window Design for Channel Estimation of OTFS Modulation

In this paper, we investigate the impacts of transmitter and receiver windows on orthogonal time-frequency space (OTFS) modulation and propose a window design to improve the OTFS channel estimation performance. Assuming ideal pulse shaping filters at the transceiver, we first identify the role of window in effective channel and the reduced channel sparsity with conventional rectangular window. Then, we characterize the impacts of windowing on the effective channel estimation performance for OTFS modulation. Based on the revealed insights, we propose to apply a Dolph-Chebyshev (DC) window at either the transmitter or the receiver to effectively enhance the sparsity of the effective channel. As such, the channel spread due to the fractional Doppler is significantly reduced, which leads to a lower error floor in channel estimation compared with that of the rectangular window. Simulation results verify the accuracy of the obtained analytical results and confirm the superiority of the proposed window designs in improving the channel estimation performance over the conventional rectangular or Sine windows.

cs.IT↗

Off-grid Channel Estimation with Sparse Bayesian Learning for OTFS Systems

This paper proposes an off-grid channel estimation scheme for orthogonal time-frequency space (OTFS) systems adopting the sparse Bayesian learning (SBL) framework. To avoid channel spreading caused by the fractional delay and Doppler shifts and to fully exploit the channel sparsity in the delay-Doppler (DD) domain, we estimate the original DD domain channel response rather than the effective DD domain channel response as commonly adopted in the literature. OTFS channel estimation is first formulated as a one-dimensional (1D) off-grid sparse signal recovery (SSR) problem based on a virtual sampling grid defined in the DD space, where the on-grid and off-grid components of the delay and Doppler shifts are separated for estimation. In particular, the on-grid components of the delay and Doppler shifts are jointly determined by the entry indices with significant values in the recovered sparse vector. Then, the corresponding off-grid components are modeled as hyper-parameters in the proposed SBL framework, which can be estimated via the expectation-maximization method. To strike a balance between channel estimation performance and computational complexity, we further propose a two-dimensional (2D) off-grid SSR problem via decoupling the delay and Doppler shift estimations. In our developed 1D and 2D off-grid SBL-based channel estimation algorithms, the hyper-parameters are updated alternatively for computing the conditional posterior distribution of channels, which can be exploited to reconstruct the effective DD domain channel. Compared with the 1D method, the proposed 2D method enjoys a much lower computational complexity while only suffers slight performance degradation. Simulation results verify the superior performance of the proposed channel estimation schemes over state-of-the-art schemes.

cs.IT↗

Cross Domain Iterative Detection for Orthogonal Time Frequency Space Modulation

Recently proposed orthogonal time frequency space (OTFS) modulation has been considered as a promising candidate for accommodating various emerging communication and sensing applications in high-mobility environments. In this paper, we propose a novel cross domain iterative detection algorithm to enhance the error performance of OTFS modulation. Different from conventional OTFS detection methods, the proposed algorithm applies basic estimation/detection approaches to both the time domain and delay-Doppler (DD) domain and iteratively updates the extrinsic information from two domains with the unitary transformation. In doing so, the proposed algorithm exploits the time domain channel sparsity and the DD domain symbol constellation constraints. We evaluate the estimation/detection error variance in each domain for each iteration and derive the state evolution to investigate the detection error performance. We show that the performance gain due to iterations comes from the non-Gaussian constellation constraint in the DD domain. More importantly, we prove the proposed algorithm can indeed converge and, in the convergence, the proposed algorithm can achieve almost the same error performance as the maximum-likelihood sequence detection even in the presence of fractional Doppler shifts. Furthermore, the computational complexity associated with the domain transformation is low, thanks to the structure of the discrete Fourier transform (DFT) kernel. Simulation results are consistent with our analysis and demonstrate a significant performance improvement compared to conventional OTFS detection methods.

cs.IT↗

Quantum Amplitude Arithmetic

Quantum algorithm involves the manipulation of amplitudes and computational basis, of which manipulating basis is largely a quantum analogue of classical computing that is always a major contributor to the complexity. In order to make full use of quantum mechanical speedup, more transformation should be implemented on amplitudes. Here we propose the notion of quantum amplitude arithmetic (QAA) that intent to evolve the quantum state by performing arithmetic operations on amplitude. Based on the basic design of multiplication and addition operations, QAA can be applied to solve the black-box quantum state preparation problem and the quantum linear system problem with fairly low complexity, and evaluate nonlinear functions on amplitudes directly. QAA is expected to find applications in a variety of quantum algorithms.

quant-ph↗

Deep Transfer Learning for Signal Detection in Ambient Backscatter Communications

Tag signal detection is one of the key tasks in ambient backscatter communication (AmBC) systems. However, obtaining perfect channel state information (CSI) is challenging and costly, which makes AmBC systems suffer from a high bit error rate (BER). To eliminate the requirement of channel estimation and to improve the system performance, in this paper, we adopt a deep transfer learning (DTL) approach to implicitly extract the features of channel and directly recover tag symbols. To this end, we develop a DTL detection framework which consists of offline learning, transfer learning, and online detection. Specifically, a DTL-based likelihood ratio test (DTL-LRT) is derived based on the minimum error probability (MEP) criterion. As a realization of the developed framework, we then apply convolutional neural networks (CNN) to intelligently explore the features of the sample covariance matrix, which facilitates the design of a CNN-based algorithm for tag signal detection. Exploiting the powerful capability of CNN in extracting features of data in the matrix formation, the proposed method is able to further improve the system performance. In addition, an asymptotic explicit expression is also derived to characterize the properties of the proposed CNN-based method when the number of samples is sufficiently large. Finally, extensive simulation results demonstrate that the BER performance of the proposed method is comparable to that of the optimal detection method with perfect CSI.

eess.SP↗