arXiv subjects

Zhisen Zhang

Publications and source records attributed to Zhisen Zhang.

9 recordsLinked to original sources

arXiv2022

Learning-based multiplexed transmission of scattered twisted light through a kilometer-scale standard multimode fiber

Multiplexing multiple orbital angular momentum (OAM) modes of light has the potential to increase data capacity in optical communication. However, the distribution of such modes over long distances remains challenging. Free-space transmission is strongly influenced by atmospheric turbulence and light scattering, while the wave distortion induced by the mode dispersion in fibers disables OAM demultiplexing in fiber-optic communications. Here, a deep-learning-based approach is developed to recover the data from scattered OAM channels without measuring any phase information. Over a 1-km-long standard multimode fiber, the method is able to identify different OAM modes with an accuracy of more than 99.9% in parallel demultiplexing of 24 scattered OAM channels. To demonstrate the transmission quality, color images are encoded in multiplexed twisted light and our method achieves decoding the transmitted data with an error rate of 0.13%. Our work shows the artificial intelligence algorithm could benefit the use of OAM multiplexing in commercial fiber networks and high-performance optical communication in turbulent environments.

physics.optics↗

arXiv2022

Abnormally High Thermal Conductivity in Fivefold Twinned Diamond Nanowires

Fivefold twins (5FTs), discovered nearly 200 years ago, are a common multiply twinned structure that usually dramatically deteriorate the thermal transport properties of nanomaterials. Here, we report the anomalous thermal conductivity ($κ$) in a novel fivefold twinned diamond nanowires (5FT-DNWs). The $κ$ of 5FT-DNWs is effectively enhanced by the defects of 5FT boundaries, and non-monotonically changes with the cross-sectional area ($\textit{S}$). Above the critical $\textit{S}$ = 7.1 nm$^{2}$, 5FT-DNWs show a constant value of $κ$, whereas below it, there appears a sharp increase in $κ$ with decreasing $\textit{S}$. More importantly, 5FT-DNWs with minimal $\textit{S}$ show a superior $κ$ over the bulk diamond. By confirming the Normal-process-dominated scattering event, it is demonstrated that the phonon hydrodynamic behavior plays a determinative role in abnormally high $κ$ of 5FT-DNWs with small $\textit{S}$. The super-transported phonon hydrodynamic phenomenon unveiled in the twinned diamond nanowires may provide a new route for pursuing highly thermally conductive nanomaterials.

physics.comp-ph↗

arXiv2021

Strengthening and Weakening by Dislocations in Monolayer MoS2

Dislocations govern the properties of any crystals. Yet, how dislocation of pentagonheptagon (5|7) in grain boundaries (GBs) affects the mechanical properties of two-dimensional MoS2 crystals remains poorly known. Using atomistic simulations and continuum disclination dipole model, we show that, depending on the tilt angle and 5|7 dislocation arrangement, MoS2 GB strength can be enhanced or reduced with tilt angle. For zigzag-tilt GBs primarily composed of Mo5|7+S5|7 dislocations, GB strength monotonically increases as the square of tilt angle. For armchair-tilt GBs with Mo5|7 or S5|7 dislocations, however, the trend of GB strength breaks down as 5|7 dislocations are non-evenly spaced. Moreover, mechanical failure initiates at the bond shared by 5|7 rings, in contrast to graphene where failure occurs at the bond shared by 6|7 rings. This work provides new insights into mechanical design of synthetic transition metal dichalcogenide crystals via dislocation engineering.

cond-mat.mtrl-sci↗

arXiv2021

Mechanical Ductile Detwinning in CH3NH3PbI3 Perovskite

Twin boundaries (TBs) were identified to show conflicting positive/negative effects on the physical properties of CH3NH3PbI3 perovskite, but their roles on the mechanical properties are pending. Herein, tensile characteristics of a variety of TB-dominated bicrystalline CH3NH3PbI3 perovskites are explored using molecular simulations. TB-contained CH3NH3PbI3 are classified into four types from their tensile ductile detwinning characteristics. Type I is characterized by smooth loading flow stressstrain responses, originating from relatively uniform stress distribution induced gradual amorphization at TB region. Types II and III are represented by sudden drop of loading stresses but then distinct ductile flow stress-strain curves, resulting from limited and large-area amorphizations of TB-involved structures, respectively. However, Type IV is highlighted by double apparent peaks in the loading curve followed by ductile flow response, coming from stress-concentration of localization-to-globalization at TB structure, as well as amorphization. This study provides critical insights into mechanics of CH3NH3PbI3 perovskites, and offers that TB engineering is a promising strategy to design mechanically robust hybrid organic-inorganic perovskites-based device systems

cond-mat.mtrl-sci↗

arXiv2021

Effect of Interfacial Dipole on Heterogeneous Ice Nucleation

In this letter, we performed molecular dynamics simulations of ice nucleation on a rigid surface model of cubic zinc blende structure with different surface dipole strength and orientation. It follows that, despite the excellent lattice match between cubic ice and substrates, the ice nucleation happened only when the interfacial water molecules (IWs) have the same or similar orientations as that of the water molecules in cubic ice. The free energy landscapes revealed that, for substrates with improper dipole strength/orientation, large free energy barriers arose to prevent the dipole of IWs rotating to the right orientation to trigger ice formation. Our results suggest that the traditional concept of lattice match, the similarity of lattice length between a substrate and the new-formed crystalline, should be extended to a broader match include the similarity between the molecular orientations of the interfacial component and the component in the specific new-formed crystalline face.

cond-mat.mtrl-sci↗

arXiv2020

Classical nucleation theory of ice nucleation: second-order correction of thermodynamic parameters

Accurate estimate of nucleation rate is crucial for the study of ice nucleation and ice-promoting/anti-freeze strategies. Within the framework of Classical Nucleation Theory (CNT), the estimate of ice nucleation rate is very sensitive to thermodynamic parameters, such as chemical potential difference between water and ice $Δμ$ and ice-water interfacial free energy $γ$. However, even today, there are still many contradictions and approximations in the estimating of these thermodynamic parameters, introducing large uncertainty to the estimate of the ice nucleation rate. Herein, starting from the basic concepts, for a general solid-liquid crystallization system, we expand the Gibbs-Thomson (GT) equation to second order, and derive the second-order analytical formulas of $Δμ$, $γ$ and nucleation barrier $ΔG$ with combining molecular dynamics (MD) simulations. These formulas describe well the temperature dependence of these thermodynamic parameters. Our results can provide a method of estimating $Δμ$, $γ$ and $ΔG$.

cond-mat.soft↗

arXiv2020

Mechanical Metastructures of Triple Periodic Carbon Clathrates

Clathrates are lightweight, cage-like, fully-sp3 three dimensional (3D) structures that are experimentally-available for several host elements of the IV group. However, carbon clathrates are as yet hypothetical structures. Herein, the mechanical properties of Type-I-C46 Type-II-C34 and Type-H-C34 carbon clathrates are explored by first-principles calculations. It is revealed that those carbon clathrates show distinct anisotropic patterns in ideal tensile/shear strengths and critical tensile/shear strains, with maximum ideal tensile strength of Type-I carbon clathrate that is superior over that of diamond in <111> direction. However, it is identified isotropy in shear Youngs modulus, and in terms of tensile/shear Youngs moduli, they are sorted as Type-I > Type-II > Type-H carbon clathrates. There are distinct critical load-bearing bond configurations that explain their distinct mechanical behaviors. Moreover, those carbon clathrates are intrinsically indirect semiconductors, and their electronic properties can be greatly dictated by mechanical strain. Carbon clathrates can be potentially utilized as lightweight technically robust engineering metastructures and in electromechanical devices.

cond-mat.mtrl-sci↗

arXiv2020

The Effect of Dipole from $γ$-AgI Substrates on Heterogeneous Ice Nucleation

Heterogeneous ice nucleation is one of the most common and important process in the physical environment. AgI has been proved to be an effective ice nucleating agent in the process of ice nucleation. However, the microscopic mechanism of AgI in heterogeneous ice nucleation has not been fully understood. Molecular dynamics simulations are applied to investigate the ability of which kinds of $γ$-AgI substrate can promote ice nucleation by changing the dipole of $γ$-AgI on the substrate, we conclude that the dipole of $γ$-AgI on the substrate can affect the conformation of ice nucleation. The surface ions with positive charge on the substrate may promote ice nucleation, while there is no ice nucleation founded on the surface ions with negative charge. $γ$-AgI substrates affect ice nucleation through adjust the orientations of water molecules near the surfaces.

cond-mat.mtrl-sci↗

arXiv2020

Oxygen Functionalization-induced Crossover in the Tensile Properties of thinnest 2D Ti2C MXene

Transition metal carbides/nitrides (MXenes) are a newly developing class of two-dimensional (2D) materials with technically robust properties that can be finely tuned by planar surface functionalization. Herein, the critical role of oxygen (O-) functionalization on the tensile mechanical characteristics of thinnest 2D Ti2C MXene is explored by molecular dynamic (MD) simulation with first-principle based ReaxFF forcefield. It is demonstrated that Ti2C sheet shows unique tensile mechanical behaviors that pronouncedly vary with the content of O-functionalization and stretching direction. Upon both loading directions, there is an apparent crossover in the Young's modulus, failure strength and failure strain. Intriguingly, under armchair directional load, a structural transition of 1T to 1T' phase occurs in the Ti2C region, which has been observed in many transition metal dichalcogenides. Upon zigzag directional straining, however, two distinct structural transformations take place in pristine and fully O-functionalized Ti2C sheets, respectively. As the load is removed, those three structural transformations are reversible, and they are critically understood by analysis of the bond configurations. The study provides important insights into mechanical behaviors and structural transformations of functionalized MXenes.

cond-mat.mtrl-sci↗