arXiv subjects

Zhiyuan Chen

Publications and source records attributed to Zhiyuan Chen.

At least 73 records · Page 4Linked to original sources

arXiv2024

Model Independent Approach of the JUNO $^8$B Solar Neutrino Program

The physics potential of detecting $^8$B solar neutrinos will be exploited at the Jiangmen Underground Neutrino Observatory (JUNO), in a model independent manner by using three distinct channels of the charged-current (CC), neutral-current (NC) and elastic scattering (ES) interactions. Due to the largest-ever mass of $^{13}$C nuclei in the liquid-scintillator detectors and the {expected} low background level, $^8$B solar neutrinos would be observable in the CC and NC interactions on $^{13}$C for the first time. By virtue of optimized event selections and muon veto strategies, backgrounds from the accidental coincidence, muon-induced isotopes, and external backgrounds can be greatly suppressed. Excellent signal-to-background ratios can be achieved in the CC, NC and ES channels to guarantee the $^8$B solar neutrino observation. From the sensitivity studies performed in this work, we show that JUNO, with ten years of data, can reach the {1$σ$} precision levels of 5%, 8% and 20% for the $^8$B neutrino flux, $\sin^2θ_{12}$, and $Δm^2_{21}$, respectively. It would be unique and helpful to probe the details of both solar physics and neutrino physics. In addition, when combined with SNO, the world-best precision of 3% is expected for the $^8$B neutrino flux measurement.

hep-ex↗

arXiv2024

User Behavior Simulation with Large Language Model based Agents

Simulating high quality user behavior data has always been a fundamental problem in human-centered applications, where the major difficulty originates from the intricate mechanism of human decision process. Recently, substantial evidences have suggested that by learning huge amounts of web knowledge, large language models (LLMs) can achieve human-like intelligence. We believe these models can provide significant opportunities to more believable user behavior simulation. To inspire such direction, we propose an LLM-based agent framework and design a sandbox environment to simulate real user behaviors. Based on extensive experiments, we find that the simulated behaviors of our method are very close to the ones of real humans. Concerning potential applications, we simulate and study two social phenomenons including (1) information cocoons and (2) user conformity behaviors. This research provides novel simulation paradigms for human-centered applications.

cs.IR↗

arXiv2024

Anomaly Detection of Particle Orbit in Accelerator using LSTM Deep Learning Technology

A stable, reliable, and controllable orbit lock system is crucial to an electron (or ion) accelerator because the beam orbit and beam energy instability strongly affect the quality of the beam delivered to experimental halls. Currently, when the orbit lock system fails operators must manually intervene. This paper develops a Machine Learning based fault detection methodology to identify orbit lock anomalies and notify accelerator operations staff of the off-normal behavior. Our method is unsupervised, so it does not require labeled data. It uses Long-Short Memory Networks (LSTM) Auto Encoder to capture normal patterns and predict future values of monitoring sensors in the orbit lock system. Anomalies are detected when the prediction error exceeds a threshold. We conducted experiments using monitoring data from Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF). The results are promising: the percentage of real anomalies identified by our solution is 68.6%-89.3% using monitoring data of a single component in the orbit lock control system. The accuracy can be as high as 82%.

cs.LG↗

arXiv2023

Real-time Monitoring for the Next Core-Collapse Supernova in JUNO

The core-collapse supernova (CCSN) is considered one of the most energetic astrophysical events in the universe. The early and prompt detection of neutrinos before (pre-SN) and during the supernova (SN) burst presents a unique opportunity for multi-messenger observations of CCSN events. In this study, we describe the monitoring concept and present the sensitivity of the system to pre-SN and SN neutrinos at the Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton liquid scintillator detector currently under construction in South China. The real-time monitoring system is designed to ensure both prompt alert speed and comprehensive coverage of progenitor stars. It incorporates prompt monitors on the electronic board as well as online monitors at the data acquisition stage. Assuming a false alert rate of 1 per year, this monitoring system exhibits sensitivity to pre-SN neutrinos up to a distance of approximately 1.6 (0.9) kiloparsecs and SN neutrinos up to about 370 (360) kiloparsecs for a progenitor mass of 30 solar masses, considering both normal and inverted mass ordering scenarios. The pointing ability of the CCSN is evaluated by analyzing the accumulated event anisotropy of inverse beta decay interactions from pre-SN or SN neutrinos. This, along with the early alert, can play a crucial role in facilitating follow-up multi-messenger observations of the next galactic or nearby extragalactic CCSN.

hep-ex↗

arXiv2023

JUNO sensitivity to the annihilation of MeV dark matter in the galactic halo

We discuss JUNO sensitivity to the annihilation of MeV dark matter in the galactic halo via detecting inverse beta decay reactions of electron anti-neutrinos resulting from the annihilation. We study possible backgrounds to the signature, including the reactor neutrinos, diffuse supernova neutrino background, charged- and neutral-current interactions of atmospheric neutrinos, backgrounds from muon-induced fast neutrons and cosmogenic isotopes. A fiducial volume cut, as well as the pulse shape discrimination and the muon veto are applied to suppress the above backgrounds. It is shown that JUNO sensitivity to the thermally averaged dark matter annihilation rate in 10 years of exposure would be significantly better than the present-day best limit set by Super-Kamiokande and would be comparable to that expected by Hyper-Kamiokande.

hep-ex↗

arXiv2023

Latest results from Daya Bay using the full dataset

The Daya Bay Reactor Neutrino Experiment was designed with the primary goal of precisely measuring the neutrino mixing parameter, $θ_{13}$. Eight identically-designed gadolinium-doped liquid scintillator detectors installed in three underground experimental halls measure the reactor antineutrinos from six nuclear reactors at different distances. Until its shutdown at the end of 2020, Daya Bay experiment has acquired nearly 6 million inverse beta decay candidates with neutron captured on gadolinium. In this talk, the latest neutrino oscillation analysis results based on full data will be presented. The resulting oscillation parameters are $\sin^{2}2θ_{13}$ = 0.0851 $\pm$ 0.0024, $Δm^{2}_{32}$ = (2.466 $\pm$ 0.060) $\times$ $10^{-3}$ ${\rm eV}^{2}$ for the normal mass ordering or $Δm^{2}_{32}$ = -(2.571 $\pm$ 0.060) $\times$ $10^{-3}$ ${\rm eV}^{2}$ for the inverted mass ordering, which are the most precise measurement of $θ_{13}$ and $Δm^{2}_{32}$ so far. Moreover, latest results on other topics such as the search of high energy reactor neutrino is included as well.

hep-ex↗

arXiv2023

Extrinsic Manipulation on a Support Plane by Learning Regrasping

Extrinsic manipulation, a technique that enables robots to leverage extrinsic resources for object manipulation, presents practical yet challenging scenarios. Particularly in the context of extrinsic manipulation on a supporting plane, regrasping becomes essential for achieving the desired final object poses. This process involves sequential operation steps and stable placements of objects, which provide grasp space for the robot. To address this challenge, we focus on predicting diverse placements of objects on the plane using deep neural networks. A framework that comprises orientation generation, placement refinement, and placement discrimination stages is proposed, leveraging point clouds to obtain precise and diverse stable placements. To facilitate training, a large-scale dataset is constructed, encompassing stable object placements and contact information between objects. Through extensive experiments, our approach is demonstrated to outperform the start-of-the-art, achieving an accuracy rate of 90.4\% and a diversity rate of 81.3\% in predicted placements. Furthermore, we validate the effectiveness of our approach through real-robot experiments, demonstrating its capability to compute sequential pick-and-place steps based on the predicted placements for regrasping objects to goal poses that are not readily attainable within a single step. Videos and dataset are available at https://sites.google.com/view/pmvlr2022/.

cs.RO↗

arXiv2023

Student-centric Model of Learning Management System Activity and Academic Performance: from Correlation to Causation

In recent years, there is a lot of interest in modeling students' digital traces in Learning Management System (LMS) to understand students' learning behavior patterns including aspects of meta-cognition and self-regulation, with the ultimate goal to turn those insights into actionable information to support students to improve their learning outcomes. In achieving this goal, however, there are two main issues that need to be addressed given the existing literature. Firstly, most of the current work is course-centered (i.e. models are built from data for a specific course) rather than student-centered; secondly, a vast majority of the models are correlational rather than causal. Those issues make it challenging to identify the most promising actionable factors for intervention at the student level where most of the campus-wide academic support is designed for. In this paper, we explored a student-centric analytical framework for LMS activity data that can provide not only correlational but causal insights mined from observational data. We demonstrated this approach using a dataset of 1651 computing major students at a public university in the US during one semester in the Fall of 2019. This dataset includes students' fine-grained LMS interaction logs and administrative data, e.g. demographics and academic performance. In addition, we expand the repository of LMS behavior indicators to include those that can characterize the time-of-the-day of login (e.g. chronotype). Our analysis showed that student login volume, compared with other login behavior indicators, is both strongly correlated and causally linked to student academic performance, especially among students with low academic performance. We envision that those insights will provide convincing evidence for college student support groups to launch student-centered and targeted interventions that are effective and scalable.

cs.CY↗

arXiv2023

The JUNO experiment Top Tracker

The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.

hep-ex↗

arXiv2023

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.

hep-ex↗

arXiv2022

HelixMO: Sample-Efficient Molecular Optimization in Scene-Sensitive Latent Space

Efficient exploration of the chemical space to search the candidate drugs that satisfy various constraints is a fundamental task of drug discovery. Advanced deep generative methods attempt to optimize the molecules in the compact latent space instead of the discrete original space, but the mapping between the original and latent spaces is always kept unchanged during the entire optimization process. The unchanged mapping makes those methods challenging to fast adapt to various optimization scenes and leads to the great demand for assessed molecules (samples) to provide optimization direction, which is a considerable expense for drug discovery. To this end, we design a sample-efficient molecular generative method, HelixMO, which explores the scene-sensitive latent space to promote sample efficiency. The scene-sensitive latent space focuses more on modeling the promising molecules by dynamically adjusting the space mapping by leveraging the correlations between the general and scene-specific characteristics during the optimization process. Extensive experiments demonstrate that HelixMO can achieve competitive performance with only a few assessed samples on four molecular optimization scenes. Ablation studies verify the positive impact of the scene-specific latent space, which is capable of identifying the critical characteristics of the promising molecules. We also deployed HelixMO on the website PaddleHelix (https://paddlehelix.baidu.com/app/drug/drugdesign/forecast) to provide drug design service.

cs.LG↗

arXiv2022

AutoMix: Unveiling the Power of Mixup for Stronger Classifiers

Data mixing augmentation have proved to be effective in improving the generalization ability of deep neural networks. While early methods mix samples by hand-crafted policies (e.g., linear interpolation), recent methods utilize saliency information to match the mixed samples and labels via complex offline optimization. However, there arises a trade-off between precise mixing policies and optimization complexity. To address this challenge, we propose a novel automatic mixup (AutoMix) framework, where the mixup policy is parameterized and serves the ultimate classification goal directly. Specifically, AutoMix reformulates the mixup classification into two sub-tasks (i.e., mixed sample generation and mixup classification) with corresponding sub-networks and solves them in a bi-level optimization framework. For the generation, a learnable lightweight mixup generator, Mix Block, is designed to generate mixed samples by modeling patch-wise relationships under the direct supervision of the corresponding mixed labels. To prevent the degradation and instability of bi-level optimization, we further introduce a momentum pipeline to train AutoMix in an end-to-end manner. Extensive experiments on nine image benchmarks prove the superiority of AutoMix compared with state-of-the-art in various classification scenarios and downstream tasks.

cs.CV↗

arXiv2022

Mass Testing and Characterization of 20-inch PMTs for JUNO

Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK).

physics.ins-det↗

arXiv2022

FaceVerse: a Fine-grained and Detail-controllable 3D Face Morphable Model from a Hybrid Dataset

We present FaceVerse, a fine-grained 3D Neural Face Model, which is built from hybrid East Asian face datasets containing 60K fused RGB-D images and 2K high-fidelity 3D head scan models. A novel coarse-to-fine structure is proposed to take better advantage of our hybrid dataset. In the coarse module, we generate a base parametric model from large-scale RGB-D images, which is able to predict accurate rough 3D face models in different genders, ages, etc. Then in the fine module, a conditional StyleGAN architecture trained with high-fidelity scan models is introduced to enrich elaborate facial geometric and texture details. Note that different from previous methods, our base and detailed modules are both changeable, which enables an innovative application of adjusting both the basic attributes and the facial details of 3D face models. Furthermore, we propose a single-image fitting framework based on differentiable rendering. Rich experiments show that our method outperforms the state-of-the-art methods.

cs.CV↗

arXiv2022

Sub-percent Precision Measurement of Neutrino Oscillation Parameters with JUNO

JUNO is a multi-purpose neutrino observatory under construction in the south of China. This publication presents new sensitivity estimates for the measurement of the $Δm^2_{31}$, $Δm^2_{21}$, $\sin^2 θ_{12}$, and $\sin^2 θ_{13}$ oscillation parameters using reactor antineutrinos, which is one of the primary physics goals of the experiment. The sensitivities are obtained using the best knowledge available to date on the location and overburden of the experimental site, the nuclear reactors in the surrounding area and beyond, the detector response uncertainties, and the reactor antineutrino spectral shape constraints expected from the TAO satellite detector. It is found that the $Δm^2_{31}$, $Δm^2_{21}$, and $\sin^2 θ_{12}$ oscillation parameters will be determined to better than 0.5% precision in six years of data collection, which represents approximately an order of magnitude improvement over existing constraints.

hep-ex↗

arXiv2022

The Study of Peer Assessment Impact on Group Learning Activities

Comparing with lecturer marked assessments, peer assessment is a more comprehensive learning process and many of the associated problems have occurred. In this research work, we study the peer-assessment impact on group learning activities in order to provide a complete and systematic review, increase the practice and quality of the peer assessment process. Pilot studies were conducted and took the form of surveys, focus group interviews, and questionnaires. Prelimi-nary surveys were conducted with 582 students and 276 responses were received, giving a response rate of 47.4%. The results show 37% student will choose individual work over group work if given the choice. In the case study, 82.1% of the total of 28 students have en-joyed working in a group using Facebook as communication tools. 89.3% of the students can demonstrate their skills through group-working and most importantly, 82.1% of them agree that peer assess-ment is an impartial method of assessment with the help of Facebook as proof of self-contribution. Our suggestions to make group work a pleasant experience are by identifying and taking action against the freeloader, giving credit to the deserving students, educating students on how to give constructive feedback and making the assessment pro-cess transparent to all.

cs.CY↗

arXiv2022

Intent Matching based Customer Services Chatbot with Natural Language Understanding

Customer service is the lifeblood of any business. Excellent customer service not only generates return business but also creates new customers. Looking at the demanding market to provide a 24/7 service to customers, many organisations are increasingly engaged in popular social media and text messaging platforms such as WhatsApp and Facebook Messenger in providing a 24/7 service to customers in the current demanding market. In this paper, we present an intent matching based customer services chatbot (IMCSC), which is capable of replacing the customer service work of sales personnel, whilst interacting in a more natural and human-like manner through the employment of Natural Language Understanding (NLU). The bot is able to answer the most common frequently asked questions and we have also integrated features for the processing and exporting of customer orders to a Google Sheet.

cs.CL↗

arXiv2021

Radiogenic neutron background in reactor neutrino experiments

We report a novel correlated background in the antineutrino detection using the inverse beta decay reaction. Spontaneous fissions and $(α,n)$ reactions in peripheral materials of the antineutrino detector, such as borosilicate glass of photomultipliers, produce fast neutrons and prompt gamma rays. If the shielding from the material to the detector target were not thick enough, neutrons and gammas could enter the target volume and mimic antineutrino signals. This paper revisits the yields and energy spectra of neutrons produced in B$(α,n)$N and F$(α,n)$Na reactions. A Geant4 based simulation has been carried out using a simplified detector geometry for the present generation reactor neutrino experiments. The background rates in these experiments are estimated. If this background was not taken into account, the value of the neutrino mixing angle $\sin^22θ_{13}$ would be underestimated. We recommend that Daya Bay, RENO, Double Chooz, and JUNO, carefully examine the masses and radiopurity levels of detector materials that are close to the target and rich in boron and fluorine.

physics.ins-det↗