arXiv subjects

Zhongpei Feng

Publications and source records attributed to Zhongpei Feng.

10 recordsLinked to original sources

arXiv2021

Enhancement of Superconductivity Linked with Linear-in-Temperature/Field Resistivity in Ion-Gated FeSe Films

Iron selenide (FeSe) - the structurally simplest iron-based superconductor, has attracted tremendous interest in the past years. While the transition temperature (Tc) of bulk FeSe is $\sim$ 8 K, it can be significantly enhanced to 40 - 50 K by various ways of electron doping. However, the underlying physics for such great enhancement of Tc and so the Cooper pairing mechanism still remain puzzles. Here, we report a systematic study of the superconducting- and normal-state properties of FeSe films via ionic liquid gating. With fine tuning, Tc evolves continuously from below 10 K to above 40 K; in situ two-coil mutual inductance measurements unambiguously confirm the gating is a uniform bulk effect. Close to Tc, the normal-state resistivity shows a linear dependence on temperature and the linearity extends to lower temperatures with the superconductivity suppressed by high magnetic fields. At high fields, the normal-state magnetoresistance exhibits a linear-in-field dependence and obeys a simple scaling relation between applied field and temperature. Consistent behaviors are observed for different-Tc states throughout the gating process, suggesting the pairing mechanism very likely remains the same from low- to high-Tc state. Importantly, the coefficient of the linear-in-temperature resistivity is positively correlated with Tc, similarly to the observations in cuprates, Bechgaard salts and iron pnictide superconductors. Our study points to a short-range antiferromagnetic exchange interaction mediated pairing mechanism in FeSe.

cond-mat.supr-con↗

arXiv2021

Universal scaling of the critical temperature and the strange-metal scattering rate in unconventional superconductors

Dramatic evolution of properties with minute change in the doping level is a hallmark of the complex chemistry which governs cuprate superconductivity as manifested in the celebrated superconducting domes as well as quantum criticality taking place at precise compositions. The strange metal state, where the resistivity varies linearly with temperature, has emerged as a central feature in the normal state of cuprate superconductors. The ubiquity of this behavior signals an intimate link between the scattering mechanism and superconductivity. However, a clear quantitative picture of the correlation has been lacking. Here, we report observation of quantitative scaling laws between the superconducting transition temperature $T_{\rm c}$ and the scattering rate associated with the strange metal state in electron-doped cuprate $\rm La_{2-x}Ce_xCuO_4$ (LCCO) as a precise function of the doping level. High-resolution characterization of epitaxial composition-spread films, which encompass the entire overdoped range of LCCO has allowed us to systematically map its structural and transport properties with unprecedented accuracy and increment of $Δx = 0.0015$. We have uncovered the relations $T_{\rm c}\sim(x_{\rm c}-x)^{0.5}\sim(A_1^\square)^{0.5}$, where $x_c$ is the critical doping where superconductivity disappears on the overdoped side and $A_1^\square$ is the scattering rate of perfect $T$-linear resistivity per CuO$_2$ plane. We argue that the striking similarity of the $T_{\rm c}$ vs $A_1^\square$ relation among cuprates, iron-based and organic superconductors is an indication of a common mechanism of the strange metal behavior and unconventional superconductivity in these systems.

cond-mat.supr-con↗

arXiv2020

Combinatorial Laser Molecular Beam Epitaxy System Integrated with Specialized Low-temperature Scanning Tunneling Microscopy

We present a newly developed facility, comprised of a combinatorial laser molecular beam epitaxy system and an in-situ scanning tunneling microscopy (STM). This facility aims at accelerating the materials research in a highly efficient way, by advanced high-throughput film synthesis techniques and subsequent fast characterization of surface morphology and electronic states. Compared with uniform films deposited by conventional methods, the so-called combinatorial thin films will be beneficial to determining the accurate phase diagrams of different materials due to the improved control of parameters such as chemical substitution and sample thickness resulting from a rotarymask method. A specially designed STM working under low-temperature and ultra-high vacuum conditions is optimized for the characterization of combinatorial thin films, in an XY coarse motion range of 15 mm $\times$ 15 mm and with sub-micrometer location precision. The overall configuration as well as some key aspects like sample holder design, scanner head, and sample/tip/target transfer mechanism are described in detail. The performance of the device is demonstrated by synthesizing high-quality superconducting FeSe thin films with gradient thickness, imaging surfaces of highly oriented pyrolytic graphite, Au (111), Bi2Sr2CaCu2O8+δ (BSCCO) and FeSe. In addition, we have also obtained clean noise spectra of tunneling junctions and the superconducting energy gap of BSCCO. The successful manufacturing of such a facility opens a new window for the next generation of equipment designed for experimental materials research.

physics.app-ph↗

arXiv2019

Emergent superconductivity in single crystalline $\mathrm{MgTi}_2\mathrm{O}_4$ films via structural engineering

Spinel compounds have demonstrated rich functionalities but rarely shown superconductivity. Here, we report the emergence of superconductivity in the spinel $\mathrm{MgTi}_2\mathrm{O}_4$, known to be an insulator with a complicated order. The superconducting transition is achieved by engineering a superlattice of $\mathrm{MgTi}_2\mathrm{O}_4$ and $\mathrm{SrTiO}_3$. The onset transition temperature in the $\mathrm{MgTi}_2\mathrm{O}_4$ layer can be tuned from 0 to 5 K in such geometry, concurrently with a stretched $c$-axis (from 8.51 to 8.53 Å) compared to the bulk material. Such a positive correlation without saturation suggests ample room for the further enhancement. Intriguingly, the superlattice exhibits isotropic upper critical field $H_{\mathrm{c}2}$ that breaks the Pauli limit, distinct from the highly anisotropic feature of interface superconductivity. The origin of superconductivity in the $\mathrm{MgTi}_2\mathrm{O}_4$ layer is understood in combination with the electron energy loss spectra and the first-principles electronic structure calculations, which point to the birth of superconductivity in the $\mathrm{MgTi}_2\mathrm{O}_4$ layer by preventing the Ti-Ti dimerization. Our discovery not only provides a platform to explore the interplay between the superconductivity and other exotic states, but also opens a new window to realize superconductivity in the spinel compounds as well as other titanium oxides.

cond-mat.supr-con↗

arXiv2019

High-throughput investigation of tunable superconductivity in FeSe films

There is an ongoing debate about the relative importance of structural change versus doping charge carriers on the mechanism of superconductivity in Fe-based materials. Elucidating this issue is a major challenge since it would require a large number of samples where structure properties or the carrier density is systematically varied. FeSe, with its structural simplicity, is an ideal platform for addressing this question. It has been demonstrated that the superconductivity in this material can be controlled through crystal lattice tuning, as well as electronic structure manipulation. Here, we apply a high-throughput methodology to FeSe to systematically delineate the interdependence of its structural and electronic properties. Using a dual-beam pulsed laser deposition, we have generated FeSe films with a marked gradient in the superconducting transition temperature (below 2 K < Tc < 12 K) across 1 cm width of the films. The Tc gradient films display ~ 1% continuous stretch and compression in the out-of-plane and in-plane lattice constants respectively, triggering the continuous enhancement of superconductivity. Combining transport and angular-resolved photoemission measurements on uniform FeSe films with tunable Tc from 3 K to 14 K, we find that the electron carrier density is intimately correlated with Tc, i.e., it increases by a factor of 6 and ultimately surpasses the almost constant hole concentration. Our transmission electron microscope and band structure calculations reveal that rather than by shifting the chemical potential, the enhanced superconductivity is linked to the selective adjustment of the dxy band dispersion across the Fermi level by means of reduced local lattice distortions. Therefore, such novel mechanism provides a key to understand discrete superconducting phases in FeSe.

cond-mat.supr-con↗

arXiv2019

Anomalies of upper critical field in the spinel superconductor LiTi$_2$O$_{4-δ}$

High-field electrical transport and point-contact tunneling spectroscopy were used to investigate superconducting properties of the unique spinel oxide, LiTi$_2$O$_{4-δ}$ films with various oxygen content. We find that the upper critical field $B_\mathrm{c2}$ gradually increases as more oxygen impurities are brought into the samples by carefully tuning the deposition atmosphere. It is striking that although the superconducting transition temperature and energy gap are almost unchanged, an astonishing isotropic $B_\mathrm{c2}$ up to $\sim$ 26 Tesla is observed in oxygen-rich sample, which is doubled compared to the anoxic sample and breaks the Pauli limit. Such anomalies of $B_\mathrm{c2}$ were rarely reported in other three dimensional superconductors. Combined with all the anomalies, three dimensional spin-orbit interaction induced by tiny oxygen impurities is naturally proposed to account for the remarkable enhancement of $B_\mathrm{c2}$ in oxygen-rich LiTi$_2$O$_{4-δ}$ films. Such mechanism could be general and therefore provides ideas for optimizing practical superconductors with higher $B_\mathrm{c2}$.

cond-mat.supr-con↗

arXiv2017

Superconducting (Li, Fe)OHFeSe film of high quality and high critical parameters

The superconducting film of (Li1-xFex)OHFeSe is reported for the first time. The thin film exhibits a small in-plane crystal mosaic of 0.22 deg, in terms of the FWHM (full-width-at-half-maximum) of x-ray rocking curve, and an excellent out-of-plane orientation by x-ray phi-scan. Its bulk superconducting transition temperature (Tc) of 42.4 K is characterized by both zero electrical resistance and diamagnetization measurements. The upper critical field (Hc2) is estimated to be 79.5 T and 443 T, respectively, for the magnetic field perpendicular and parallel to the ab plane. Moreover, a large critical current density (Jc) of a value over 0.5 MA/cm2 is achieved at ~20 K. Such a (Li1-xFex)OHFeSe film is therefore not only important to the fundamental research for understanding the high-Tc mechanism, but also promising in the field of high-Tc superconductivity application, especially in high-performance electronic devices and large scientific facilities such as superconducting accelerator.

cond-mat.supr-con↗

arXiv2017

Promoting superconductivity in FeSe films via fine manipulation of crystal lattice

Stabilized FeSe thin films in ambient pressure with tunable superconductivity would be a promising candidate for superconducting electronic devices yet its superconducting transition temperature (Tc) is below 10 K in bulk materials. By carefully controlling the depositions on twelve kinds of substrates using pulsed laser deposition technique, high quality single crystalline FeSe samples were fabricated with full width of half maximum 0.515? in the rocking curve and clear four-fold symmetry in phi-scan from x-ray diractions. The films have a maximum Tc 15 K on the CaF2 substrate and do not show obvious decay in the air for more than half a year. Slightly tuning the stoichiometry of the FeSe targets, the Tc becomes adjustable from 15 to < 2 K with quite narrow transition widths less than 2 K, and shows a positive relation with the out-of-plane (c-axis) lattice parameter of the films. However, there is no clear relation between the Tc and the surface atomic distance of the substrates. By reducing the thickness of the films, the Tc decreases and fades away in samples of less than 10 nm, suggesting that the strain effect is not responsible for the enhancement of Tc in our experiments.

cond-mat.supr-con↗

arXiv2017

Electronic structure and nematic phase transition in superconducting multi-layer FeSe films grown by pulsed laser deposition method

We report comprehensive angle-resolved photoemission investigations on the electronic structure of single crystal multiple-layer FeSe films grown on CaF2 substrate by pulsed laser deposition (PLD) method. Measurements on FeSe/CaF2 samples with different superconducting transition temperatures Tc of 4 K, 9 K and 14 K reveal electronic difference in their Fermi surface and band structure. Indication of the nematic phase transition is observed from temperature-dependent measurements of these samples; the nematic transition temperature is 140-160 K, much higher than 90 K for the bulk FeSe. Potassium deposition is applied onto the surface of these samples; the nematic phase is suppressed by potassium deposition which introduces electrons to these FeSe films and causes a pronounced electronic structure change. We compared and discussed the electronic structure and superconductivity of the FeSe/CaF2 films by PLD method with the FeSe/SrTiO3 films by molecular beam epitaxy (MBE) method and bulk FeSe. The PLD-grown multilayer FeSe/CaF2 is more hole-doped than that in MBE-grown multiple-layer FeSe films. Our results on FeSe/CaF2 films by PLD method establish a link between bulk FeSe single crystal and FeSe/SrTiO3 films by MBE method, and provide important information to understand superconductivity in FeSe-related systems.

cond-mat.supr-con↗

arXiv2017

Doping Mn into (Li1-xFex)OHFe1-ySe superconducting crystals via ion-exchange and ion-release/introduction syntheses

We report the success in introducing Mn into (Li1-xFex)OHFe1-ySe superconducting crystals by applying two different hydrothermal routes, ion exchange (1-Step) and ion release/introduction (2-Step). The micro-region x-ray diffraction and energy dispersive x-ray spectroscopy analyses indicate that the Mn has been doped into the lattice, and its content in the 1-Step fabricated sample is higher than that in the 2-Step one. Magnetic susceptibility and electric transport properties reveal that Mn doping influences little on the superconducting transition, regardless of 1-Step or 2-Step routes. By contrast, the characteristic temperature, T*, where the negative Hall coefficient reaches its minimum, is significantly reduced by Mn doping. This implies that the reduction of the hole carriers contribution is obviously modified, and hence the hole band might have no direct relationship with the superconductivity in (Li1-xFex)OHFe1-ySe superconductors. Our present hydrothermal methods of ion exchange and ion release/introduction provide an efficient way for elements substitution/doping into (Li1-xFex)OHFe1-ySe superconductors, which will promote the in-depth investigations on the role of multiple electron and hole bands and their interplay with the high-temperature superconductivity in the FeSe-based superconductors.

cond-mat.supr-con↗