arXiv subjects

Zhongqi He

Publications and source records attributed to Zhongqi He.

5 recordsLinked to original sources

arXiv2026

An Adaptive Power Division Strategy for Nonlinear Components in Rectification

This letter presents a novel adaptive power division strategy, which uses two rectifying diodes with nonlinear impedance characteristics that are configured in parallel to function optimally at their individual power levels. Through the strategic adjustment of the input admittance, the conductance of the low-power diode decreases progressively with increasing power, while the conductance of the high-power diode increases correspondingly. This conductance-based power allocation method ensures that the power is rectified consistently by the most appropriate diode, regardless of the power level, and, thus, enables efficient rectification across an extended range. This letter presents a rectifier typology to substantiate the proposed strategy. Experimental results confirm the efficiency of the adaptive power division strategy, with the rectifier showing efficiency in excess of 60% from 5 to 29.5 dBm, giving a power dynamic range of 24.5 dB.

physics.app-ph↗

arXiv2025

High-Efficiency Octave Bandwidth Rectifier for Electromagnetic Energy Harvesting

This letter presents the design and implementation of a compact high-efficiency octave microwave rectifier. A key highlight is the novel segmented impedance matching method, a unique approach that expands the rectifier bandwidth. The diode reactance is initially regulated by a series short-ended microstrip line. Impedance-compensated structures, characterized by varying admittance properties across an extensive frequency range, partition the operating frequency band into two segments based on the input impedance, thereby minimizing impedance variation. Ultimately, the input impedance is matched by a novel triple-band matching network. An octave rectifier was fabricated and measured. Results demonstrate that the rectifier achieves over 50% efficiency over 1.3-2.55 GHz fractional bandwidth 64.9% at 0-dBm RF input power. Even with a decrease in input power to -10 dBm, the rectifier maintains over 30% efficiency.

physics.app-ph↗

arXiv2025

Compact High-Efficiency All-Polarization Rectenna for Wireless Power Transmission

In this letter, we present an innovative design for a compact, high-efficiency all-polarization receiving rectenna tailored for wireless power transmission. This rectenna, which integrates an antenna with two same rectifier units, employs direct conjugate matching of antenna impedance to rectifier impedance. This approach eliminates the necessity for an external impedance-matching network, thereby reducing the overall dimensions of the rectenna. The implementation of virtual ground concept streamlines the design of the rectifier's output filter. The low-profile antenna, engineered for operation at 2.45 GHz, demonstrates high conversion efficiency across all polarization angles. The measured RF-to-DC efficiency exceeds 63% for all polarization angles, achieving a peak efficiency of 82.2%.

physics.app-ph↗

arXiv2025

A Reconfigurable Circuit Strategy and Its Application in Low-Power Rectifier for Ambient Energy Harvesting

In ambient electromagnetic energy harvesting systems, the input power to the rectifier is low. To improve rectification efficiency, Schottky diodes, which are sensitive to low power, are commonly selected as rectifying devices to convert microwave power into dc power. However, low-power rectifying diodes typically have low reverse breakdown voltages, making them susceptible to reverse breakdown under high power conditions. This letter proposes a low-power rectifier with reconfigurable function. The rectifying diode is connected in parallel with the p-i-n diode. At low input power, the output dc voltage is low, and the p-i-n diode remains off, having no impact on the rectifier operation. As the input power increases, the p-i-n diode turns on, causing change in circuit structure and impedance mismatch. This leads to increased reflected power, thereby preventing the rectifying diode from receiving excessive power. In addition, the turn-on voltage of the p-i-n diode is lower than the reverse breakdown voltage of the rectifying diode, protecting it from reverse breakdown.

physics.app-ph↗

arXiv2025

High-Efficiency Isolator-Free Magnetron Power Combining Method Based on H-Plane Tee Coupling and Peer-to-Peer Locking

Magnetrons are widely used as high-performance microwave sources in microwave heating, microwave chemistry, and microwave power transmission due to their high efficiency, low cost, and compact size advantages. However, the output power of a single magnetron is limited by its resonant cavities, posing a physical constraint. High-efficiency coherent power combining based on the injection-locking technique effectively overcomes this limitation and meets the demand for higher output power. Nevertheless, using isolators, such as circulators, introduces significant insertion loss, and the injection signal sources and phase shifters increase the system size, cost, and complexity in a conventional magnetron power combining (MPC) system. A novel method is proposed to utilize the coupling between two ports of an H-plane tee to achieve peer-to-peer injection locking magnetrons. Meanwhile, an asymmetric phase compensation is realized using a section of waveguide to adjust the magnetron output characteristics. Theoretical and numerical analyses provided qualitative insight into the system output behavior. Subsequently, an experimental system was developed for verification. In the experiments, the system achieved maximum microwave power combining efficiencies 90.2%, 93.6%, and 93.6% at electrical waveguide lengths corresponding to 90, 135, and 225, with output powers of 1650, 1260, and 1610 W, respectively, without the use of any isolators or external injection sources. The experimental results show good agreement with numerical calculations. This method offers the advantages of low cost, compact size, and low loss, providing a new approach for developing high-performance MPC systems in the future.

physics.app-ph↗