arXiv subjects

Zhongqin Wang

Publications and source records attributed to Zhongqin Wang.

15 recordsLinked to original sources

arXiv2026

Agentic Semantic Sensing for Resource-Adaptive AI-RAN

Semantic sensing (SemS) acquires task-relevant information rather than reconstructing complete physical information. Existing SemS formulations typically operate open loop: sensing configurations and observation schedules are fixed before inference and cannot respond to evolving task-level evidence. We propose Agentic SemS, a closed-loop framework for AI-enabled radio access networks (AI-RANs) that controls sensing within a communication-feasible profile set. A profile-conditioned causal Transformer updates the semantic belief from streaming observations, while key-value caching enables efficient state updates across profile changes without repeatedly processing the complete history. A semantic utility network estimates the task-level benefit of acquiring the next observation block under each feasible profile after accounting for sensing cost. The resulting continuation utilities jointly support next-profile selection and semantic early exit, adapting sensing configuration and duration to evolving evidence. The expected semantic gain is further related to conditional mutual information, providing a value-of-information interpretation of continued online sensing. Experiments on Widar3.0 with six emulated sensing profiles show that, in comparison with full-sequence High, the resource-efficient Agentic setting reduces normalized cumulative sensing cost by 25.33% while achieving 85.79% Macro-F1. At the same utility checkpoint, semantic early exit provides a further 12.35% cost reduction over adaptive sensing without early exit, with a 0.97-percentage-point Macro-F1 decrease.

cs.AI↗

arXiv2026

Cross-Room Passive WiFi Tracking: Joint Estimation of Target Trajectory and Virtual Transmitter Location

Indoor bistatic WiFi sensing must often operate across rooms, where intervening walls block the direct line-of-sight (LOS) path between the transmitter (Tx) and receiver (Rx). Recovering a human trajectory from channel-state-information (CSI)-derived delay, angle-of-arrival (AoA), and Doppler estimates is difficult because the Tx position is often unknown and NLOS propagation is inconsistent with direct-path geometry. This paper presents CoTrack, a self-calibrating passive WiFi tracking scheme that does not require the Tx position. CoTrack extracts one dominant human-induced response and represents its transmitter-side propagation by a virtual Tx, which it estimates jointly with the human trajectory. Because similar measurements can be explained by different virtual-Tx--trajectory pairs, CoTrack uses multi-start nonlinear least squares and accepts an initialization only when the best-fitting candidates concentrate around a common virtual-Tx position. It then applies online alternating optimization for continuous tracking. We analyze the local identifiability of the joint estimation problem and derive the corresponding Cramér--Rao bound. Across six LOS and cross-room NLOS experiments, CoTrack achieves a median trajectory error of 1.14m(80th percentile: 1.42m) and a median virtual-Tx discrepancy of 0.47m(80th percentile: 0.54m).

eess.SP↗

arXiv2026

SemISAC: Semantic Integrated Sensing and Communications

Conventional integrated sensing and communications (ISAC) systems primarily integrate communications and sensing through shared physical resources, without explicitly exploiting task-relevant semantic information. To move beyond such physical-level integration, we propose semantic ISAC (SemISAC), a general framework that unifies semantic communication (SemCom) and semantic sensing (SemS) to convey source meaning and acquire environmental meaning. Specifically, the transmitter combines source semantics and sensing task information with available side information to design the shared waveform and allocate radio resources, while the receiver-side communication and sensing task decoders recover the source meaning and infer the required environmental information, respectively. We also provide an information-theoretic interpretation to characterize the relationship between physical and task-relevant information and the resulting semantic trade-off in SemISAC. Building on this framework, we formulate the general SemISAC design problem and propose two realization methods, namely end-to-end (E2E) SemISAC optimization and modular SemISAC optimization. As a concrete realization, we apply modular SemISAC optimization to jointly design a learnable time-frequency (TF) precoder in an orthogonal frequency-division multiplexing (OFDM) system for representative SemCom and SemS tasks. Simulation results demonstrate that the proposed realization reduces sensing semantic distortion under a given communication requirement and achieves a more favorable communication-sensing trade-off than baseline designs.

eess.SP↗

arXiv2026

Rainfall Sensing via Mobile Communication Signals

Rainfall monitoring is important for hydrological observation, disaster warning, and environmental sensing, but conventional rain gauges and weather radars suffer from sparse deployment and high infrastructure costs. This paper proposes PMN-RainSense, a rainfall sensing framework using sub-6-GHz mobile communication signals that supports practical single-antenna deployment. Unlike attenuation-based approaches, which are unreliable at sub-6 GHz because rain-induced attenuation over short mobile access links is only on the order of hundredths of a decibel, the proposed framework exploits fine-grained dynamics. A spectral-temporal channel state information (CSI) compensation method suppresses packet-wise timing and phase distortions while preserving sensing-relevant information. Rainfall-sensitive features are extracted from the delay-Doppler domain to mitigate environmental interference, with angle-domain filtering as an optional extension for multi-antenna receivers. Under bandwidth and antenna constraints, rainfall-correlated Doppler fluctuations serve as the dominant sensing signature, while Doppler-domain normalization improves robustness across links and deployments. Controlled WiFi experiments demonstrate rainfall-associated Doppler broadening and achieve a three-class classification accuracy of 95.48% using a random forest classifier. Long-Term Evolution (LTE) CSI measurements collected from cellular base stations over 11 carrier frequencies from 0.763 to 2.68 GHz yield a mean absolute error (MAE) of 0.25-0.27 mm/h for rainfall intensity estimation using a one-dimensional convolutional network.

eess.SP↗

arXiv2026

WiFi Sensing via Reservoir Computing

Practical WiFi sensing must handle clock-asynchronous links, cross-domain variation, and post-deployment updating under the limited compute budget of access point (AP), router, and embedded Internet-of-Things platforms such as ESP-class devices. Reservoir computing (RC) is attractive in this setting because its temporal encoder can remain fixed while only a lightweight readout needs to be optimized and updated. To address these deployment challenges under tight compute budgets, we present ReWiS, a WiFi-sensing-oriented reservoir framework that transforms channel state information (CSI) into structured micro-Doppler streams with common, antenna-specific, and differential motion cues, encodes them with a graph-coupled reservoir, and adapts to a new domain after deployment by freezing the reservoir and fine-tuning only a compact readout with a few labeled target samples. On a large-scale WiFi sensing benchmark, ReWiS achieves 89.2% in-domain macro-F1 and 82.0% mean cross-domain macro-F1 with only a 0.72M trainable readout, improves to 88.5\% after lightweight post-deployment adaptation, and remains competitive with recent deep baselines evaluated under the same protocol, which achieve 87.5%-89.2% mean cross-domain macro-F1, while requiring lower optimization cost and lower CPU latency. These results indicate that ReWiS provides a practical reservoir-based design for deployable WiFi sensing, with further potential for low-power hardware realization.

eess.SP↗

arXiv2026

Ambiguity-Resolved Micro-Doppler Construction for Asynchronous Bistatic Sensing

Integrated sensing and communications (ISAC) can turn wireless networks into pervasive sensing platforms, but bistatic deployments are impaired by transceiver clock asynchrony, which induces random phase fluctuations in channel state information (CSI). CSI-ratio sanitization introduces nonlinear distortion that limits multi-target scalability and complicates delay- and angle-of-arrival (AoA)-domain processing. Cross-antenna conjugate multiplication (CACC) preserves a linear structure, but leaves mirror ambiguity and second-order by-products that corrupt motion-induced Doppler signatures. We develop a micro-Doppler construction framework that resolves the ambiguity and suppresses these residual by-products. Cyclic differencing first attenuates the dominant mirror component. We then exploit the facts that residual terms occur at differenced delay coordinates and lack an ordered AoA steering structure, designing a lightweight delay-AoA-Doppler pipeline that isolates the desired kinematic response without coherently accumulating residuals at target bins. The filtered responses are aggregated into a higher-SNR micro-Doppler representation. Ablation studies confirm the value of residual suppression and multidimensional filtering. On a large-scale WiFi gesture dataset, the proposed representation generalizes across four domain factors, attaining 90.1%-98.2% accuracy and outperforming representative baselines by about 18 percentage points on average.

eess.SP↗

arXiv2026

Posterior-Aware Differential Channel Tracking for Reliable Single-Stream DAB+ Passive Radar

Digital audio broadcasting plus (DAB+) is an attractive illuminator for passive radar because it provides persistent, high-power, and geographically widespread very high frequency (VHF) orthogonal frequency-division multiplexing (OFDM) signals. A channel state information (CSI) sensing approach can convert a single received DAB+ stream into a CSI sequence for radar sensing, avoiding the need for a separately received reference signal in conventional passive radars. However, CSI estimation in DAB+ is challenging due to the differentially encoded communication symbols across time. A wrong symbol transition estimation leads to a persistent multiplicative error in the sequential CSI sequence within a DAB+ frame. This paper formulates single-stream DAB+ passive radar as a posterior-probability-aware differential CSI tracking problem. The proposed method uses the previously tracked CSI as a channel prior, performs prediction-aided maximum a posteriori detection of current symbol, converts posterior transition reliability into observation uncertainty, and applies linear minimum mean squared error fusion to obtain a stable tracking CSI. A reliability-informed CSI fusion strategy is also introduced to preserve weak target information. Theoretical analysis is provided, showing guaranteed performance again in symbol and CSI estimation. Simulation results show that the proposed method can reduce CSI estimation error by over 15~dB compared with prior art. It also improves median target-to-background ratio by more than 11~dB in random fading scenes. Experiments in Sydney, Australia demonstrate improved range-Doppler maps for commercial aircraft sensing.

eess.SP↗

arXiv2026

Bistatic Passive Sensing via CSI Power

Passive object sensing with communication signals is a key enabler of perceptive mobile networks and integrated sensing and communication. In practical bistatic deployments, transmitter-receiver asynchrony and hardware impairments introduce time-varying random phase offsets in Channel State Information (CSI). Together with limited bandwidth and small antenna arrays, these effects degrade sensing accuracy. This work proposes a lightweight bistatic passive tracking and sensing framework that operates in the CSI-power domain. CSI power suppresses these offsets without explicit phase calibration, while preserving target-induced sensing cues. We show that physically admissible constraints in the spatial-frequency domain induced by transmitter-receiver geometry can resolve the mirror ambiguity inherent to real-valued CSI power. Building on these properties, we develop a real-time 3D Fourier-domain processing pipeline that jointly recovers spectral (delay), spatial (angle), and temporal (Doppler) signatures. The resulting features are integrated into an online framework with adaptive motion detection, outlier suppression, and extended Kalman filter tracking with deterministic initialization, followed by position-refined micro-Doppler feature extraction for micro-motion sensing. Extensive experiments, including simulations, a real-world prototype using 3.1 GHz LTE signals, and an open-source gait recognition dataset, demonstrate the effectiveness of the proposed CSI-power-based framework for bistatic passive tracking and sensing.

eess.SP↗

arXiv2026

Rethinking RSSI for WiFi Sensing

The Received Signal Strength Indicator (RSSI) is ubiquitously available on commodity WiFi devices but is commonly regarded as too coarse for fine-grained sensing. This paper revisits its sensing potential and presents WiRSSI, a bistatic WiFi sensing framework that enables RSSI-only passive human tracking and motion sensing. WiRSSI employs a transmitter and a receiver equipped with a three-antenna array (1Tx-3Rx), and is readily extensible to Multiple-Input Multiple-Output (MIMO) deployments. We first show how Channel State Information (CSI) power implicitly preserves phase-related motion modulation and how this relationship carries over to RSSI, indicating that RSSI can retain exploitable Doppler, Angle-of-Arrival (AoA), and delay cues. WiRSSI extracts Doppler-AoA features via a lightweight 2D Fast Fourier Transform (FFT) pipeline and infers bistatic delay from amplitude-only information in the absence of subcarrier-level phase. The estimated AoA and delay are then mapped to Cartesian coordinates and denoised to recover motion trajectories. Experiments in practical environments show that WiRSSI achieves median XY localization errors of 0.905 m, 0.784 m, and 0.785 m for elliptical, linear, and rectangular trajectories, respectively, compared with 0.574 m, 0.599 m, and 0.514 m from a representative CSI-based method. We further demonstrate RSSI-only gesture recognition on the Widar3.0 dataset, where WiRSSI features provide meaningful discriminative performance. These results suggest that, despite lacking subcarrier-level information compared with CSI, RSSI can support practical WiFi sensing as a complementary and hardware-friendly option when CSI is restricted, unreliable, or privacy-sensitive.

eess.SP↗

arXiv2025

Efficient River Water Level Sensing Using Cellular CSI and Joint Space-Time Processing

Accurate and timely water level monitoring is critical for flood prevention, environmental management, and emerging smart infrastructure systems. Traditional water sensing methods often rely on dedicated sensors, which can be costly to deploy and difficult to maintain and are vulnerable to damage during floods.In this work, we propose a novel cellular signalbased sensing scheme that passively estimates water level changes using downlink mobile signals from existing communication infrastructure. By capturing subtle variations in channel state information (CSI), the proposed method estimates the length changes of the water-reflected signal path, which correspond to water level variations. A space-time processing framework is developed to jointly estimate the angle of arrival and Doppler shift, enabling isolation and enhancement of the water-reflected path via beamforming, while effectively suppressing environmental noise. The phase evolution of the beamformed signal is then extracted to infer water level changes. To address clock asynchronism between the transmitter and receiver inherent in bistatic systems, we introduce a beamforming-based compensation technique for removing time-varying random phase offsets in CSI. Field experiments conducted across a river demonstrate that the proposed method enables accurate and reliable water level estimation, achieving a mean accuracy ranging from 1.5 cm to 3.05 cm across different receiver configurations and deployments.

eess.SP↗

arXiv2025

Towards SISO Bistatic Sensing for ISAC

Integrated Sensing and Communication (ISAC) is a key enabler for next-generation wireless systems. However, real-world deployment is often limited to low-cost, single-antenna transceivers. In such bistatic Single-Input Single-Output (SISO) setup, clock asynchrony introduces random phase offsets in Channel State Information (CSI), which cannot be mitigated using conventional multi-antenna methods. This work proposes WiDFS 3.0, a lightweight bistatic SISO sensing framework that enables accurate delay and Doppler estimation from distorted CSI by effectively suppressing Doppler mirroring ambiguity. It operates with only a single antenna at both the transmitter and receiver, making it suitable for low-complexity deployments. We propose a self-referencing cross-correlation (SRCC) method for SISO random phase removal and employ delay-domain beamforming to resolve Doppler ambiguity. The resulting unambiguous delay-Doppler-time features enable robust sensing with compact neural networks. Extensive experiments show that WiDFS 3.0 achieves accurate parameter estimation, with performance comparable to or even surpassing that of prior multi-antenna methods, especially in delay estimation. Validated under single- and multi-target scenarios, the extracted ambiguity-resolved features show strong sensing accuracy and generalization. For example, when deployed on the embedded-friendly MobileViT-XXS with only 1.3M parameters, WiDFS 3.0 consistently outperforms conventional features such as CSI amplitude, mirrored Doppler, and multi-receiver aggregated Doppler.

eess.SP↗

arXiv2025

ISAC: From Human to Environmental Sensing

Integrated Sensing and Communications (ISAC) is poised to become one of the defining capabilities of the sixth generation (6G) wireless communications systems, enabling the network infrastructure to jointly support high-throughput communications and situational awareness. While recent advances have explored ISAC for both human-centric applications and environmental monitoring, existing research remains fragmented across these domains. This paper provides the first unified review of ISAC-enabled sensing for both human activities and environment, focusing on signal-level mechanisms, sensing features, and real-world feasibility. We begin by characterising how diverse physical phenomena, ranging from human vital sign and motion to precipitation and flood dynamics, impact wireless signal propagation, producing measurable signatures in channel state information (CSI), Doppler profiles, and signal statistics. A comprehensive analysis is then presented across two domains: human sensing applications including localisation, activity recognition, and vital sign monitoring; and environmental sensing for rainfall, soil moisture, and water level. Experimental results from Long-Term Evolution (LTE) sensing under non-line-of-sight (NLOS) conditions are incorporated to highlight the feasibility in infrastructure-limited scenarios. Open challenges in signal fusion, domain adaptation, and generalisable sensing architectures are discussed to facilitate future research toward scalable and autonomous ISAC.

eess.SP↗

arXiv2025

Water Level Sensing via Communication Signals in a Bi-Static System

Accurate water level sensing is essential for flood monitoring, agricultural irrigation, and water resource optimization. Traditional methods require dedicated sensor deployments, leading to high installation costs, vulnerability to interference, and limited resolution. This work proposes PMNs-WaterSense, a novel scheme leveraging Channel State Information (CSI) from existing mobile networks for water level sensing. Our scheme begins with a CSI-power method to eliminate phase offsets caused by clock asynchrony in bi-static systems. We then apply multi-domain filtering across the time (Doppler), frequency (delay), and spatial (Angle-of-Arrival, AoA) domains to extract phase features that finely capture variations in path length over water. To resolve the $2π$ phase ambiguity, we introduce a Kalman filter-based unwrapping technique. Additionally, we exploit transceiver geometry to convert path length variations into water level height changes, even with limited antenna configurations. We validate our framework through controlled experiments with 28 GHz mmWave and 3.1 GHz LTE signals in real time, achieving average height estimation errors of 0.025 cm and 0.198 cm, respectively. Moreover, real-world river monitoring with 2.6 GHz LTE signals achieves an average error of 4.8 cm for a 1-meter water level change, demonstrating its effectiveness in practical deployments.

eess.SP↗

arXiv2023

Vital Sign Monitoring in Dynamic Environment via mmWave Radar and Camera Fusion

Contact-free vital sign monitoring, which uses wireless signals for recognizing human vital signs (i.e, breath and heartbeat), is an attractive solution to health and security. However, the subject's body movement and the change in actual environments can result in inaccurate frequency estimation of heartbeat and respiratory. In this paper, we propose a robust mmWave radar and camera fusion system for monitoring vital signs, which can perform consistently well in dynamic scenarios, e.g., when some people move around the subject to be tracked, or a subject waves his/her arms and marches on the spot. Three major processing modules are developed in the system, to enable robust sensing. Firstly, we utilize a camera to assist a mmWave radar to accurately localize the subjects of interest. Secondly, we exploit the calculated subject position to form transmitting and receiving beamformers, which can improve the reflected power from the targets and weaken the impact of dynamic interference. Thirdly, we propose a weighted multi-channel Variational Mode Decomposition (WMC-VMD) algorithm to separate the weak vital sign signals from the dynamic ones due to subject's body movement. Experimental results show that, the 90${^{th}}$ percentile errors in respiration rate (RR) and heartbeat rate (HR) are less than 0.5 RPM (respirations per minute) and 6 BPM (beats per minute), respectively.

eess.SP↗

arXiv2021

Single-Target Real-Time Passive WiFi Tracking

Device-free human tracking is an essential ingredient for ubiquitous wireless sensing. Recent passive WiFi tracking systems face the challenges of inaccurate separation of dynamic human components and time-consuming estimation of multi-dimensional signal parameters. In this work, we present a scheme named WiFi Doppler Frequency Shift (WiDFS), which can achieve single-target real-time passive tracking using channel state information (CSI) collected from commercial-off-the-shelf (COTS) WiFi devices. We consider the typical system setup including a transmitter with a single antenna and a receiver with three antennas; while our scheme can be readily extended to another setup. To remove the impact of transceiver asynchronization, we first apply CSI cross-correlation between each RX antenna pair. We then combine them to estimate a Doppler frequency shift (DFS) in a short-time window. After that, we leverage the DFS estimate to separate dynamic human components from CSI self-correlation terms of each antenna, thereby separately calculating angle-of-arrival (AoA) and human reflection distance for tracking. In addition, a hardware calibration algorithm is presented to refine the spacing between RX antennas and eliminate the hardware-related phase differences between them. A prototype demonstrates that WiDFS can achieve real-time tracking with a median position error of 72.32 cm in multipath-rich environments.

cs.NI↗