arXiv subjects

Zhongyi Huang

Publications and source records attributed to Zhongyi Huang.

At least 55 records · Page 3Linked to original sources

arXiv2024

Seed-Music: A Unified Framework for High Quality and Controlled Music Generation

We introduce Seed-Music, a suite of music generation systems capable of producing high-quality music with fine-grained style control. Our unified framework leverages both auto-regressive language modeling and diffusion approaches to support two key music creation workflows: controlled music generation and post-production editing. For controlled music generation, our system enables vocal music generation with performance controls from multi-modal inputs, including style descriptions, audio references, musical scores, and voice prompts. For post-production editing, it offers interactive tools for editing lyrics and vocal melodies directly in the generated audio. We encourage readers to listen to demo audio examples at https://team.doubao.com/seed-music "https://team.doubao.com/seed-music".

cs.SD↗

arXiv2024

Physics-Informed Tailored Finite Point Operator Network for Parametric Interface Problems

Learning operators for parametric partial differential equations (PDEs) using neural networks has gained significant attention in recent years. However, standard approaches like Deep Operator Networks (DeepONets) require extensive labeled data, and physics-informed DeepONets encounter training challenges. In this paper, we introduce a novel physics-informed tailored finite point operator network (PI-TFPONet) method to solve parametric interface problems without the need for labeled data. Our method fully leverages the prior physical information of the problem, eliminating the need to include the PDE residual in the loss function, thereby avoiding training challenges. The PI-TFPONet is specifically designed to address certain properties of the problem, allowing us to naturally obtain an approximate solution that closely matches the exact solution. Our method is theoretically proven to converge if the local mesh size is sufficiently small and the training loss is minimized. Notably, our approach is uniformly convergent for singularly perturbed interface problems. Extensive numerical studies show that our unsupervised PI-TFPONet is comparable to or outperforms existing state-of-the-art supervised deep operator networks in terms of accuracy and versatility.

math.NA↗

arXiv2024

Component Fourier Neural Operator for Singularly Perturbed Differential Equations

Solving Singularly Perturbed Differential Equations (SPDEs) poses computational challenges arising from the rapid transitions in their solutions within thin regions. The effectiveness of deep learning in addressing differential equations motivates us to employ these methods for solving SPDEs. In this manuscript, we introduce Component Fourier Neural Operator (ComFNO), an innovative operator learning method that builds upon Fourier Neural Operator (FNO), while simultaneously incorporating valuable prior knowledge obtained from asymptotic analysis. Our approach is not limited to FNO and can be applied to other neural network frameworks, such as Deep Operator Network (DeepONet), leading to potential similar SPDEs solvers. Experimental results across diverse classes of SPDEs demonstrate that ComFNO significantly improves accuracy compared to vanilla FNO. Furthermore, ComFNO exhibits natural adaptability to diverse data distributions and performs well in few-shot scenarios, showcasing its excellent generalization ability in practical situations.

cs.LG↗

arXiv2024

Tailored Finite Point Operator Networks for Interface problems

Interface problems pose significant challenges due to the discontinuity of their solutions, particularly when they involve singular perturbations or high-contrast coefficients, resulting in intricate singularities that complicate resolution. The increasing adoption of deep learning techniques for solving partial differential equations has spurred our exploration of these methods for addressing interface problems. In this study, we introduce Tailored Finite Point Operator Networks (TFPONets) as a novel approach for tackling parameterized interface problems. Leveraging DeepONets and integrating the Tailored Finite Point method (TFPM), TFPONets offer enhanced accuracy in reconstructing solutions without the need for intricate equation manipulation. Experimental analyses conducted in both one- and two-dimensional scenarios reveal that, in comparison to existing methods such as DeepONet and IONet, TFPONets demonstrate superior learning and generalization capabilities even with limited locations.

math.NA↗

arXiv2024

Error Correction Decoding Algorithms of RS Codes Based on An Earlier Termination Algorithm to Find The Error Locator Polynomial

Reed-Solomon (RS) codes are widely used to correct errors in storage systems. Finding the error locator polynomial is one of the key steps in the error correction procedure of RS codes. Modular Approach (MA) is an effective algorithm for solving the Welch-Berlekamp (WB) key-equation problem to find the error locator polynomial that needs $2t$ steps, where $t$ is the error correction capability. In this paper, we first present a new MA algorithm that only requires $2e$ steps and then propose two fast decoding algorithms for RS codes based on our MA algorithm, where $e$ is the number of errors and $e\leq t$. We propose Improved-Frequency Domain Modular Approach (I-FDMA) algorithm that needs $2e$ steps to solve the error locator polynomial and present our first decoding algorithm based on the I-FDMA algorithm. We show that, compared with the existing methods based on MA algorithms, our I-FDMA algorithm can effectively reduce the decoding complexity of RS codes when $e<t$. Furthermore, we propose the $t_0$-Shortened I-FDMA ($t_0$-SI-FDMA) algorithm ($t_0$ is a predetermined even number less than $2t-1$) based on the new termination mechanism to solve the error number $e$ quickly. We propose our second decoding algorithm based on the SI-FDMA algorithm for RS codes and show that the multiplication complexity of our second decoding algorithm is lower than our first decoding algorithm (the I-FDMA decoding algorithm) when $2e<t_0+1$.

cs.IT↗

arXiv2024

tSF: Transformer-based Semantic Filter for Few-Shot Learning

Few-Shot Learning (FSL) alleviates the data shortage challenge via embedding discriminative target-aware features among plenty seen (base) and few unseen (novel) labeled samples. Most feature embedding modules in recent FSL methods are specially designed for corresponding learning tasks (e.g., classification, segmentation, and object detection), which limits the utility of embedding features. To this end, we propose a light and universal module named transformer-based Semantic Filter (tSF), which can be applied for different FSL tasks. The proposed tSF redesigns the inputs of a transformer-based structure by a semantic filter, which not only embeds the knowledge from whole base set to novel set but also filters semantic features for target category. Furthermore, the parameters of tSF is equal to half of a standard transformer block (less than 1M). In the experiments, our tSF is able to boost the performances in different classic few-shot learning tasks (about 2% improvement), especially outperforms the state-of-the-arts on multiple benchmark datasets in few-shot classification task.

cs.CV↗

arXiv2024

Efficient Enumeration of Large Maximal k-Plexes

Finding cohesive subgraphs in a large graph has many important applications, such as community detection and biological network analysis. Clique is often a too strict cohesive structure since communities or biological modules rarely form as cliques for various reasons such as data noise. Therefore, $k$-plex is introduced as a popular clique relaxation, which is a graph where every vertex is adjacent to all but at most $k$ vertices. In this paper, we propose a fast branch-and-bound algorithm as well as its task-based parallel version to enumerate all maximal $k$-plexes with at least $q$ vertices. Our algorithm adopts an effective search space partitioning approach that provides a lower time complexity, a new pivot vertex selection method that reduces candidate vertex size, an effective upper-bounding technique to prune useless branches, and three novel pruning techniques by vertex pairs. Our parallel algorithm uses a timeout mechanism to eliminate straggler tasks, and maximizes cache locality while ensuring load balancing. Extensive experiments show that compared with the state-of-the-art algorithms, our sequential and parallel algorithms enumerate large maximal $k$-plexes with up to $5 \times$ and $18.9 \times$ speedup, respectively. Ablation results also demonstrate that our pruning techniques bring up to $7 \times$ speedup compared with our basic algorithm.

cs.DS↗

arXiv2024

Set Transformation: Trade-off Between Repair Bandwidth and Sub-packetization

Maximum distance separable (MDS) codes facilitate the achievement of elevated levels of fault tolerance in storage systems while incurring minimal redundancy overhead. Reed-Solomon (RS) codes are typical MDS codes with the sub-packetization level being one, however, they require large repair bandwidth defined as the total amount of symbols downloaded from other surviving nodes during single-node failure/repair. In this paper, we present the {\em set transformation}, which can transform any MDS code into set transformed code such that (i) the sub-packetization level is flexible and ranges from 2 to $(n-k)^{\lfloor\frac{n}{n-k}\rfloor}$ in which $n$ is the number of nodes and $k$ is the number of data nodes, (ii) the new code is MDS code, (iii) the new code has lower repair bandwidth for any single-node failure. We show that our set transformed codes have both lower repair bandwidth and lower field size than the existing related MDS array codes, such as elastic transformed codes \cite{10228984}. Specifically, our set transformed codes have $2\%-6.6\%$ repair bandwidth reduction compared with elastic transformed codes \cite{10228984} for the evaluated typical parameters.

cs.IT↗

arXiv2024

Reed-Solomon Codes over Cyclic Polynomial Ring with Lower Encoding/Decoding Complexity

Reed-Solomon (RS) codes are constructed over a finite field that have been widely employed in storage and communication systems. Many fast encoding/decoding algorithms such as fast Fourier transform (FFT) and modular approach are designed for RS codes to reduce the encoding/decoding complexity defined as the number of XORs involved in the encoding/decoding procedure. In this paper, we present the construction of RS codes over the cyclic polynomial ring $ \mathbb{F}_2[x]/(1+x+\ldots+x^{p-1})$ and show that our codes are maximum distance separable (MDS) codes. Moreover, we propose the FFT and modular approach over the ring that can be employed in our codes for encoding/decoding complexity reduction. We show that our codes have 17.9\% encoding complexity reduction and 7.5\% decoding complexity reduction compared with RS codes over finite field, for $(n,k)=(2048,1984)$.

cs.IT↗

arXiv2024

Nonreciprocal interactions in crowd dynamics: investigating the impact of moving threats on pedestrian speed preferences

Nonreciprocal interaction crowd systems, such as human-human, human-vehicle, and human-robot systems, often have serious impacts on pedestrian safety and social order. A more comprehensive understanding of these systems is needed to optimize system stability and efficiency. Despite the importance of these interactions, empirical research in this area remains limited. Thus, in our study we explore this underresearched area, focusing on scenarios where nonreciprocity plays a critical role, such as mass stabbings, which pose a substantial risk to public safety. We conducted the first experiments on this system and analysed high-accuracy data obtained from these experiments. The extent of the direct threat zone is determined by the speed of the moving threat and the radius of danger occurrence. We further categorize potential threats into direct, adjacent, and rear-view zones, quantifying the level of threat for pedestrians. Our study revealed that a pedestrian's desired velocity correlated positively with potential threat intensity, increasing until near the direct threat zone. An emerging steady state is observed when escape routes are blocked by moving threats. This deviation affects the density-velocity relationship, making it distinct from the general relationship. This deviation signifies unique pedestrian behaviour in the presence of moving threats. Additionally, the rate of change in the angle for pedestrian motion in various desired directions is synchronized. This indicates the emergence of collective intelligence in nonreciprocal interaction crowd systems. As a result, our study may constitute a pioneering step towards understanding nonreciprocal interactions in crowd systems through laboratory experiments. These findings may enhance pedestrian safety and inform not only government crowd management strategies but also individual self-protection measures.

physics.soc-ph↗

arXiv2024

Distributed Approximate Computing with Constant Locality

Consider a distributed coding for computing problem with constant decoding locality, i.e., with a vanishing error probability, any single sample of the function can be approximately recovered by probing only constant number of compressed bits. We establish an achievable rate region by designing an efficient layered coding scheme, where the coding rate is reduced by introducing auxiliary random variables and local decoding is achieved by exploiting the expander graph code. Then we show the rate region is optimal under mild regularity conditions on source distributions. The proof relies on the reverse hypercontractivity and a rounding technique to construct auxiliary random variables. The rate region is strictly smaller than that for the classical problem without the constant locality constraint in most cases, which indicates that more rate is required in order to achieve lower coding complexity. Moreover, a coding for computing problem with side information is analogously studied. We also develop graph characterizations, which simplifies the computation of the achievable rate region.

cs.IT↗

arXiv2023

Localization and Discrete Beamforming with a Large Reconfigurable Intelligent Surface

In millimeter-wave (mmWave) cellular systems, reconfigurable intelligent surfaces (RISs) are foreseeably deployed with a large number of reflecting elements to achieve high beamforming gains. The large-sized RIS will make radio links fall in the near-field localization regime with spatial non-stationarity issues. Moreover, the discrete phase restriction on the RIS reflection coefficient incurs exponential complexity for discrete beamforming. It remains an open problem to find the optimal RIS reflection coefficient design in polynomial time. To address these issues, we propose a scalable partitioned-far-field protocol that considers both the near-filed non-stationarity and discrete beamforming. The protocol approximates near-field signal propagation using a partitioned-far-field representation to inherit the sparsity from the sophisticated far-field and facilitate the near-field localization scheme. To improve the theoretical localization performance, we propose a fast passive beamforming (FPB) algorithm that optimally solves the discrete RIS beamforming problem, reducing the search complexity from exponential order to linear order. Furthermore, by exploiting the partitioned structure of RIS, we introduce a two-stage coarse-to-fine localization algorithm that leverages both the time delay and angle information. Numerical results demonstrate that centimeter-level localization precision is achieved under medium and high signal-to-noise ratios (SNR), revealing that RISs can provide support for low-cost and high-precision localization in future cellular systems.

cs.IT↗

arXiv2023

Distributed Matrix Multiplication with a Smaller Recovery Threshold through Modulo-based Approaches

This paper considers the problem of calculating the matrix multiplication of two massive matrices $\mathbf{A}$ and $\mathbf{B}$ distributedly. We provide a modulo technique that can be applied to coded distributed matrix multiplication problems to reduce the recovery threshold. This technique exploits the special structure of interpolation points and can be applied to many existing coded matrix designs. Recently studied discrete Fourier transform based code achieves a smaller recovery threshold than the optimal MatDot code with the expense that it cannot resist stragglers. We also propose a distributed matrix multiplication scheme based on the idea of locally repairable code to reduce the recovery threshold of MatDot code and provide resilience to stragglers. We also apply our constructions to a type of matrix computing problems, where generalized linear models act as a special case.

cs.IT↗

arXiv2023

Privacy-Preserving Polynomial Computing Over Distributed Data

In this letter, we delve into a scenario where a user aims to compute polynomial functions using their own data as well as data obtained from distributed sources. To accomplish this, the user enlists the assistance of $N$ distributed workers, thereby defining a problem we refer to as privacy-preserving polynomial computing over distributed data. To address this challenge, we propose an approach founded upon Lagrange encoding. Our method not only possesses the ability to withstand the presence of stragglers and byzantine workers but also ensures the preservation of security. Specifically, even if a coalition of $X$ workers collude, they are unable to acquire any knowledge pertaining to the data originating from the distributed sources or the user.

cs.CR↗

arXiv2023

Generalized Simple Regenerating Codes: Trading Sub-packetization and Fault Tolerance

Maximum distance separable (MDS) codes have the optimal trade-off between storage efficiency and fault tolerance, which are widely used in distributed storage systems. As typical non-MDS codes, simple regenerating codes (SRCs) can achieve both smaller repair bandwidth and smaller repair locality than traditional MDS codes in repairing single-node erasure. In this paper, we propose {\em generalized simple regenerating codes} (GSRCs) that can support much more parameters than that of SRCs. We show that there is a trade-off between sub-packetization and fault tolerance in our GSRCs, and SRCs achieve a special point of the trade-off of GSRCs. We show that the fault tolerance of our GSRCs increases when the sub-packetization increases linearly. We also show that our GSRCs can locally repair any singe-symbol erasure and any single-node erasure, and the repair bandwidth of our GSRCs is smaller than that of the existing related codes.

cs.IT↗

arXiv2023

Approximation and Generalization of DeepONets for Learning Operators Arising from a Class of Singularly Perturbed Problems

Singularly perturbed problems present inherent difficulty due to the presence of a thin boundary layer in its solution. To overcome this difficulty, we propose using deep operator networks (DeepONets), a method previously shown to be effective in approximating nonlinear operators between infinite-dimensional Banach spaces. In this paper, we demonstrate for the first time the application of DeepONets to one-dimensional singularly perturbed problems, achieving promising results that suggest their potential as a robust tool for solving this class of problems. We consider the convergence rate of the approximation error incurred by the operator networks in approximating the solution operator, and examine the generalization gap and empirical risk, all of which are shown to converge uniformly with respect to the perturbation parameter. By utilizing Shishkin mesh points as locations of the loss function, we conduct several numerical experiments that provide further support for the effectiveness of operator networks in capturing the singular boundary layer behavior.

math.NA↗

arXiv2023

Seismic Tomography with Random Batch Gradient Reconstruction

Seismic tomography solves high-dimensional optimization problems to image subsurface structures of Earth. In this paper, we propose to use random batch methods to construct the gradient used for iterations in seismic tomography. Specifically, we use the frozen Gaussian approximation to compute seismic wave propagation, and then construct stochastic gradients by random batch methods. The method inherits the spirit of stochastic gradient descent methods for solving high-dimensional optimization problems. The proposed idea is general in the sense that it does not rely on the usage of the frozen Gaussian approximation, and one can replace it with any other efficient wave propagation solvers, e.g., Gaussian beam methods and spectral element methods. We prove the convergence of the random batch method in the mean-square sense, and show the numerical performance of the proposed method by two-dimensional and three-dimensional examples of wave-equation-based travel-time inversion and full-waveform inversion, respectively. As a byproduct, we also prove the convergence of the accelerated full-waveform inversion using dynamic mini-batches and spectral element methods.

math.NA↗

arXiv2022

The Double Regularization Method for Capacity Constrained Optimal Transport

Capacity constrained optimal transport is a variant of optimal transport, which adds extra constraints on the set of feasible couplings in the original optimal transport problem to limit the mass transported between each pair of source and sink. Based on this setting, constrained optimal transport has numerous applications, e.g., finance, network flow. However, due to the large number of constraints in this problem, existing algorithms are both time-consuming and space-consuming. In this paper, inspired by entropic regularization for the classical optimal transport problem, we introduce a novel regularization term for capacity constrained optimal transport. The regularized problem naturally satisfies the capacity constraints and consequently makes it possible to analyze the duality. Unlike the matrix-vector multiplication in the alternate iteration scheme for solving classical optimal transport, in our algorithm, each alternate iteration step is to solve several single-variable equations. Fortunately, we find that each of these equations corresponds to a single-variable monotonic function, and we convert solving these equations into finding the unique zero point of each single-variable monotonic function with Newton's method. Extensive numerical experiments demonstrate that our proposed method has a significant advantage in terms of accuracy, efficiency, and memory consumption compared with existing methods.

math.OC↗