arXiv subjects

Zhu-Bo Wang

Publications and source records attributed to Zhu-Bo Wang.

At least 19 recordsLinked to original sources

arXiv2026

Hundred-hertz quantum circuit iteration rate in a reusable neutral-atom array

Neutral-atom quantum processors have rapidly advanced in scale and coherence, yet their practical performance remains constrained by limited quantum circuit iteration rates (qCIRs) and information throughput. Here we experimentally demonstrate a high-throughput neutral-atom system based on non-destructive readout and atom reuse. By integrating a chip-based photonic interface with a 10-qubit array, we implement non-destructive readout with a retention probability of 99.7%, and further achieve a raw qCIR of 101Hz and a post-selected qCIR of 74.8Hz. More importantly, we verify a general throughput optimization methodology and obtain a normalized Fisher information rate of 57.7Hz, improving the achievable throughput by more than one order of magnitude compared with conventional methods. Our results establish a practical route toward high-throughput neutral-atom quantum processors.

quant-ph↗

arXiv2026

A scalable chip-integrated single-photon source array based on 50 individually addressable neutral atoms

Scalable arrays of identical single-photon sources are a central resource for photonic quantum information processing, quantum networks and quantum metrology. Neutral atoms provide intrinsically identical emitters that can be assembled and rearranged in optical tweezers, but a many-channel fiber interface to individually trapped atoms has remained a major technical challenge. Here we demonstrate a chip-interfaced single-photon source array based on 50 individually addressable $^{87}\mathrm{Rb}$ atoms. A glass waveguide fan-out converts the \SI{5}{\micro m} pitch of the optical-tweezer array to the \SI{127}{\micro m} pitch of a commercial fiber array, mapping each atom to its own waveguide, fiber and single-photon detector. We resolve all 50 channels with an average nearest-neighbor cross-talk of $0.4\%$ and a uniform insertion loss of \SI{2.9}{dB}, and verify single-photon emission with $g^{(2)}(0)=0.29$, presently limited by detector dark counts and residual cooling-light scattering. Combining per-channel atom discrimination, rearrangement and reservoir replenishment, we prepare source subarrays of up to 24 atoms with a $93\%$ fill fraction. For small target numbers, atom loss is repaired from the reservoir at the detection-limited rate of \SI{118}{Hz}. We further fabricate a 784-channel waveguide chip, showing that the photonic interface can be extended well beyond the present number. This architecture establishes a fiber-native neutral-atom platform for larger arrays of identical single-photon sources.

physics.atom-ph↗

arXiv2026

Rydberg quantum antennas for chip-interfaced single-photon source array

We propose a Rydberg quantum antenna, consisting of a one-dimensional chain of neutral atoms trapped in a standing-wave optical tweezer, as a chip-interfaced single-photon source. Rydberg blockade induces a single collective excitation in the atomic chain, while its ordered geometry shapes the photon emission into a directional beam, thereby realizing a quantum antenna that emits strictly one photon at a time. Through numerical simulations, we demonstrate single-photon collection efficiencies into a waveguide exceeding 70\% through a high-NA lens with a negligible multiple excitation probability. These performance are robust against probabilistic atom loading in the standing-wave dipole traps, requiring only ten atoms, indicating experimental feasibility. The Rydberg quantum antenna thus offers a unique route toward scalable arrays of high-efficiency, high-purity, and identical single-photon sources interfaced with a photonic chip, addressing key challenges in photonic quantum information technology.

quant-ph↗

arXiv2026

A re-entrant chip-free-space photonic interface for telecom-to-Rubidium spectroscopy

Photonic integrated circuits (PICs) generate, route, and process light with high efficiency, scalability, and functional density on a single chip. Yet the tightly confined on-chip modes can not easily access or effectively interact with atomic vapors, fluids, gain media, and biological samples. Existing approaches require bringing the medium onto the chip or into a weak, tightly confined evanescent field, which restricts the interaction volume and the range of accessible media. Here, we demonstrate a re-entrant chip-free-space interface in which a thin-film lithium niobate circuit frequency-doubles telecom light, emits the 780~nm field through a Rubidium vapor cell, and recollects the reflected probe on the same chip. This emit-interact-recollect loop resolves the saturated absorption spectrum and stabilizes the telecom laser to within $\pm 280$~kHz over 2 hours. Our study paves an route to embed external media into PICs through the re-entrant photonic interface.

physics.optics↗

arXiv2026

Low-latency FPGA-based electronic control system for fast preparation of defect-free atom arrays

The scalability of neutral atom quantum computing demands integrated electronic control systems with low latency, modular architecture, and real-time feedback capability. Here, we present an FPGA-based electronic control system that eliminates the PC from the feedback loop, integrating photon counting, real-time decision-making, and waveform generation within a unified PXIe architecture. The system achieves a total feedback latency of $282\,\mathrm{μs}$ and is validated in practical experiments by assembling defect-free atom arrays from 24 stochastically loaded optical tweezers. A single-round rearrangement achieves a filling fraction of $\sim96\%$, while feedback-controlled iterative rearrangement over five rounds boosts the success probability for generating a 10-atom defect-free array from $65.7\%$ to $95.4\%$. This system establishes the electronic infrastructure necessary for mid-circuit measurement and real-time quantum error correction on neutral-atom platforms.

quant-ph↗

arXiv2026

Synthetic Gauge Phase in Rydberg Electromagnetically Induced Transparency

We demonstrate a synthetic gauge phase in Rydberg electromagnetically induced transparency (EIT) using room-temperature rubidium vapor. By exploiting polarization selection rules in a ladder-type system involving ground, intermediate, and Rydberg states, multiple Zeeman sublevels form closed-loop transitions that acquire a gauge phase. We show that the relative polarization angle between the linearly polarized probe and coupling lasers directly controls this gauge phase, which modulates the EIT transmission and Rydberg state population, consequently controlling the linewidth of EIT due to Rydberg dipole-dipole interactions between atoms. Our approach provides a simple polarization-based method for realizing synthetic gauge physics and manipulating many-body interactions in atomic ensembles without requiring laser cooling and dipole traps.

physics.atom-ph↗

arXiv2026

Optimized readout strategies for neutral atom quantum processors

Neutral atom quantum processors have emerged as a promising platform for scalable quantum information processing, offering high-fidelity operations and exceptional qubit scalability. A key challenge in realizing practical applications is efficiently extracting readout outcomes while maintaining high system throughput, i.e., the rate of quantum task executions. In this work, we develop a theoretical framework to quantify the trade-off between readout fidelity and atomic retention. Moreover, we introduce a metric of quantum circuit iteration rate (qCIR) and employ normalized quantum Fisher information to characterize system overall performance. Further, by carefully balancing fidelity and retention, we demonstrate a readout strategy for optimizing information acquisition efficiency. Considering the experimentally feasible parameters for 87Rb atoms, we demonstrate that qCIRs of 197.2Hz and 154.5Hz are achievable using single photon detectors and cameras, respectively. These results provide practical guidance for constructing scalable and high-throughput neutral atom quantum processors for applications in sensing, simulation, and near-term algorithm implementation.

quant-ph↗

arXiv2025

Volcano Architecture for Scalable Quantum Processor Units

Quantum information processing platforms based on array of matter qubits, such as neutral atoms, trapped ions, and quantum dots, face significant challenges in scalable addressing and readout as system sizes increase. Here, we propose the "Volcano" architecture that establishes a new quantum processing unit implementation method based on optical channel mapping on a arbitrarily arranged static qubit array. To support the feasibility of Volcano architecture, we show a proof-of-principle demonstration by employing a photonic chip that leverages custom-designed three-dimensional waveguide structures to transform one-dimensional beam arrays into arbitrary two-dimensional output patterns matching qubit array geometries. We demonstrate parallel and independent control of 49-channel with negligible crosstalk and high uniformity. This architecture addresses the challenges in scaling up quantum processors, including both the classical link for parallel qubit control and the quantum link for efficient photon collection, and holds the potential for interfacing with neutral atom arrays and trapped ion crystals, as well as networking of heterogeneous quantum systems.

quant-ph↗

arXiv2025

Efficient single-atom transfer from an optical conveyor belt to a tightly confined optical tweezer

Efficient loading of single atoms into tightly confined traps is crucial for advancing quantum information processing and exploring atom-photon interactions. However, directly loading atoms from a magneto-optical trap (MOT) into static tweezers in cavity-based systems and hybrid atom-photon interfaces remains a challenge. Here, we demonstrate atom loading in a tightly confined optical tweezer 0.6mm away from MOT by an optical conveyor belt. By employing real-time feedback control of the atom number in the overlapping region between the conveyor belt and the tweezer, we enhance a single-atom loading probability to 77.6%. Our technique offers a versatile solution for deterministic single-atom loading in various experimental settings and paves the way for diverse applications based on hybrid photonic-atom structures.

physics.atom-ph↗

arXiv2024

Multifunctional metalens for trapping and characterizing single atoms

Precise control and manipulation of neutral atoms are essential for quantum technologies but largely dependent on conventional bulky optical setups. Here, we demonstrate a multifunctional metalens that integrates an achromatic lens with large numerical aperture, a quarter-wave plate, and a polarizer for trapping and characterizing single Rubidium atoms. The metalens simultaneously focuses a trapping beam at 852\,nm and collects single-photon fluorescence at 780\,nm. We observe a strong dependence of the trapping lifetime on an external bias magnetic field, suggests a complex interplay between the circularly polarized trapping light and the atom's internal states. Our work showcases the potential of metasurfaces in realizing compact and integrated quantum systems based on cold atoms, opening up new possibilities for studying quantum control and manipulation at the nanoscale.

quant-ph↗

arXiv2024

Proposal of quantum repeater architecture based on Rydberg atom quantum processors

Realizing large-scale quantum networks requires the generation of high-fidelity quantum entanglement states between remote quantum nodes, a key resource for quantum communication, distributed computation and sensing applications. However, entanglement distribution between quantum network nodes is hindered by optical transmission loss and local operation errors. Here, we propose a novel quantum repeater architecture that synergistically integrates Rydberg atom quantum processors with optical cavities to overcome these challenges. Our scheme leverages cavity-mediated interactions for efficient remote entanglement generation, followed by Rydberg interaction-based entanglement purification and swapping. Numerical simulations, incorporating realistic experimental parameters, demonstrate the generation of Bell states with 99\% fidelity at rates of 1.1\,kHz between two nodes in local-area network (distance $0.1\,\mathrm{km}$), and can be extend to metropolitan-area ($25\,\mathrm{km}$) or intercity ($\mathrm{250\,\mathrm{km}}$, with the assitance of frequency converters) network with a rate of 0.1\,kHz. This scalable approach opens up near-term opportunities for exploring quantum network applications and investigating the advantages of distributed quantum information processing.

quant-ph↗

arXiv2024

Integrated photonic nonreciprocal devices based on susceptibility-programmable medium

The switching and control of optical fields based on nonlinear optical effects are often limited to relatively weak nonlinear susceptibility and strong optical pump fields. Here, an optical medium with programmable susceptibility tensor based on polarizable atoms is proposed. Under a structured optical pump, the ground state population of atoms could be efficiently controlled by tuning the chirality and intensity of optical fields, and thus the optical response of the medium is programmable in both space and time. We demonstrate the potential of this approach by engineering the spatial distribution of the complex susceptibility tensor of the medium in photonic structures to realize nonreciprocal optical effects. Specifically, we investigate the advantages of chiral interaction between atoms and photons in an atom-cladded waveguide, theoretically showing that reconfigurable, strong, and fastly switchable isolation of optical signals in a selected optical mode is possible. The susceptibility-programmable medium provides a promising way to efficiently control the optical field, opening up a wide range of applications for integrated photonic devices and structured optics.

physics.optics↗

arXiv2024

Enhancing single-atom loading in tightly confined dipole traps with ancillary dipole beam

Single atoms trapped in tightly focused optical dipole traps provide an excellent experimental platform for quantum computing, precision measurement, and fundamental physics research. In this work, we propose and demonstrate a novel approach to enhancing the loading of single atoms by introducing a weak ancillary dipole beam. The loading rate of single atoms in a dipole trap can be significantly improved by only a few tens of microwatts of counter-propagating beam. It was also demonstrated that multiple atoms could be loaded with the assistance of a counter-propagating beam. By reducing the power requirements for trapping single atoms and enabling the trapping of multiple atoms, our method facilitates the extension of single-atom arrays and the investigation of collective light-atom interactions.

quant-ph↗

arXiv2023

Atom-referenced on-chip soliton microcomb

For the applications of the frequency comb in microresonators, it is essential to obtain a fully frequency-stabilized microcomb laser source. Here, we demonstrate an atom-referenced stabilized soliton microcomb generation system based on the integrated microring resonator. The pump light around $1560.48\,\mathrm{nm}$ locked to an ultra-low-expansion (ULE) cavity, is frequency-doubled and referenced to the atomic transition of $^{87}\mathrm{Rb}$. The repetition rate of the soliton microcomb is injection-locked to an atomic-clock-stabilized radio frequency (RF) source, leading to mHz stabilization at $1$ seconds. As a result, all comb lines have been frequency-stabilized based on the atomic reference and could be determined with very high precision reaching $\sim18\,\mathrm{Hz}$ at 1 second, corresponding to the frequency stability of $9.5\times10^{-14}$. Our approach provides an integrated and fully stabilized microcomb experiment scheme with no requirement of $f-2f$ technique, which could be easily implemented and generalized to various photonic platforms, thus paving the way towards the portable and ultraprecise optical sources for high precision spectroscopy.

physics.optics↗

arXiv2022

Controllable atomic collision in a tight optical dipole trap

Single atoms are interesting candidates for studying quantum optics and quantum information processing. Recently, trapping and manipulation of single atoms using tight optical dipole traps have generated considerable interest. Here we report an experimental investigation of the dynamics of atoms in a modified optical dipole trap with a backward propagating dipole trap beam, where a change in the two-atom collision rate by six times has been achieved. The theoretical model presented gives a prediction of high probabilities of few-atom loading rates under proper experimental conditions. This work provides an alternative approach to the control of the few-atom dynamics in a dipole trap and the study of the collective quantum optical effects of a few atoms.

physics.optics↗

arXiv2022

Self-induced optical non-reciprocity

Non-reciprocal optical components are indispensable in optical applications, and their realization without any magnetic field arose increasing research interests in photonics. Exciting experimental progress has been achieved by either introducing spatial-temporal modulation of the optical medium or combining Kerr-type optical nonlinearity with spatial asymmetry in photonic structures. However, extra driving fields are required for the first approach, while the isolation of noise and the transmission of the signal cannot be simultaneously achieved for the other approach. Here, we experimentally demonstrate a new concept of nonlinear non-reciprocal susceptibility for optical media and realize the completely passive isolation of optical signals without any external bias field. The self-induced isolation by the input signal is demonstrated with an extremely high isolation ratio of 63.4 dB, a bandwidth of 2.1 GHz for 60 dB isolation, and a low insertion loss of around 1 dB. Furthermore, novel functional optical devices are realized, including polarization purification and non-reciprocal leverage. The demonstrated nonlinear non-reciprocity provides a versatile tool to control light and deepen our understanding of light-matter interactions, and enables applications ranging from topological photonics to unidirectional quantum information transfer in a network.

physics.optics↗

arXiv2022

Nonlinear optical radiation of a lithium niobate microcavity

The nonlinear optical radiation of an integrated lithium niobate microcavity is demonstrated, which has been neglected in previous studies of nonlinear photonic devices. We find that the nonlinear coupling between confined optical modes on the chip and continuum modes in free space can be greatly enhanced on the platform of integrated microcavity, with feasible relaxation of the phase-matching condition. With an infrared pump laser, we observe the vertical radiation of second-harmonic wave at the visible band, which indicates a robust phase-matching-free chip-to-free-space frequency converter and also unveils an extra energy dissipation channel for integrated devices. Such an unexpected coherent nonlinear interaction between the free-space beam and the confined mode is also validated by the different frequency generation. Furthermore, based on the phase-matching-free nature of the nonlinear radiation, we build an integrated atomic gas sensor to characterize Rb isotopes with a single telecom laser. The unveiled mechanism of nonlinear optical radiation is universal for all dielectric photonic integrated devices, and provides a simple and robust chip-to-free-space as well as visible-to-telecom interface.

physics.optics↗

arXiv2021

Planar Integrated Magneto Optical Trap

Abstract The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam; the flat coil chip replaces the conventional anti-Helmholtz coils of a cylindrical geometry. We trap 10^{4} cold ^{87}\text{Rb} atoms in the planar-integrated MOT, at a point 3-9 mm above the chip surface. This novel configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock and quantum memory devices.

physics.atom-ph↗