Searcharxiv⌕ Search

arXiv subjects

Zhuoren Wan

Publications and source records attributed to Zhuoren Wan.

8 recordsLinked to original sources

Dual-Comb Spectrometry Enabled by Gain-Assisted Electro-Optic Fiber Ring Resonators

Broadband dual-comb spectroscopy (DCS) with widely tunable repetition rates and simplified frequency stabilization is desirable for diverse sensing applications. Here, we demonstrate DCS using two gain-assisted fiber ring resonators that share a continuous-wave (CW) laser and incorporate intracavity electro-optic (EO) phase modulation. Intracavity gain compensates for round-trip losses, sustaining repeated phase modulation and enabling flat-top comb spectra with a 20-dB bandwidth exceeding 1.8 THz. Harmonic-order selection provides widely tunable repetition rates from approximately 5 to 0.2 GHz without substantially compromising the spectral bandwidth. The comb phase noise closely follows that of the radio-frequency (RF) drive at low offset frequencies. Without active frequency stabilization, the two combs exhibit an instrument-limited beat-note linewidth of 2 Hz, indicating high mutual coherence. The generated dual combs enable high-speed DCS at the single-interferogram rate, providing a platform for dynamic spectroscopic measurements. This all-fiber architecture, together with its simplified operation, offers a promising route towards compact and readily integrable dual-comb instruments.

physics.optics↗

Reference-Beam-Assisted Perturbation-Resistant Imaging Through A Single Multimode Fiber

Multimode fiber (MMF) imaging is highly sensitive to mechanical perturbations, which alter modal coupling and disrupt the speckle-to-target mapping. Here, we propose a reference-beam-assisted method for image reconstruction across multiple fiber configurations. An independent reference beam propagates through the same MMF as the imaging signal without target modulation, providing target-independent transmission-state information through its speckle patterns without requiring a separate configuration-sensing structure. A neural network jointly processes the signal and reference speckles to reconstruct target images. Experiments with MNIST and Fashion-MNIST across 10 fiber configurations demonstrate improved reconstruction quality, faster training convergence, and more accurate configuration identification. Further evaluation across 40 configurations confirms the reconstruction benefit of reference-beam assistance over a larger set of perturbed fiber states. These results provide a foundation for developing perturbation-adaptive MMF imaging systems for flexible endoscopy and minimally invasive optical diagnostics.

physics.optics↗

Scattering-force-driven light-sheet fluorescence microscopy for scan-free three-dimensional imaging

Optical manipulation offers a powerful non-contact approach to precise positioning, directional transport and three-dimensional (3D) imaging of microscale objects. However, positional fluctuations during optical confinement introduce spatial sampling errors that compromise imaging quality and acquisition speed. Here, we demonstrate a scattering-force-driven optical manipulation imaging method that replaces the stepwise scanning of conventional optical trapping with continuous directional transport of microparticles. An axial scattering force generated by a low-numerical-aperture focused beam propels microparticles through a light sheet, while their positions and fluorescence signals are simultaneously recorded to establish direct spatial correspondence between particle motion and tomographic images. Experiments demonstrate that this approach reduces the effects of positional fluctuations on 3D imaging, achieving an axial sampling interval of 0.1 μm and an imaging rate of 250 Hz. The method also enables effective imaging of samples with diverse structural features while reducing optical power requirements by 70%. By combining robust spatial sampling, high-speed acquisition and reduced photodamage, this approach offers a promising route to rapid 3D imaging, dynamic observation and microscale spatial analysis of microparticles and biological specimens.

physics.optics↗

Comb-enabled spectral-domain image transport through perturbation-prone multimode fibers

Multimode fibers (MMFs) offer a compact platform for imaging, sensing, and information transport, but their practical deployment is hindered by sensitivity to fiber perturbations, which alter modal coupling and invalidate conventional speckle-based calibrations. Here, we demonstrate perturbation-resilient image transport through MMFs by combining image-to-spectrum encoding with dual-comb spectroscopy. Two-dimensional images are converted into comb-line-resolved spectral signatures before fiber transmission, allowing spatial information to be carried in the spectral domain rather than in the output speckle field. After propagation, dual-comb heterodyne detection maps the encoded spectrum into the radio-frequency domain, enabling massively parallel spectral readout with a single photodetector. Neural-network-assisted compressive reconstruction further enables high-fidelity imaging from sparse, noisy, and spectrally aliased measurements. Our approach achieves Pearson correlation coefficients exceeding 0.9 under strong fiber perturbations and supports frame rates up to 2.5 MHz, allowing the observation of transient switching dynamics in a digital micromirror device. These results establish a powerful tool for robust, real-time image transport through flexible MMFs, with potential applications in remote sensing and fiber-based optical instrumentation.

physics.optics↗

Reconstructive comb spectroscopy: A single-pixel detection paradigm beyond dual-comb limitations

Frequency comb spectroscopy has revolutionized broadband molecular fingerprinting with mode-defined resolution. While dual-comb spectroscopy stands as a dominant paradigm for high-resolution measurements, it relies on mutually coherent dual combs, and its applicability to non-cooperative sensing is limited by the requirement for phase-sensitive detection and controlled optical returns. Here, we introduce reconstructive comb spectroscopy, a fundamentally different paradigm that eliminates these constraints. By integrating a mode-programmable optical comb with a computational sensing scheme based on single-pixel detection, our method achieves picometer-level spectral resolution over a 10-nm (1.27-THz) instantaneous bandwidth, with single-photon sensitivity down to 10^-4 photons per pulse, and compressed spectral acquisition at 2.5% sampling while maintaining reconstruction errors below 10%. We demonstrate robust performance through scattering media and from non-cooperative targets. These capabilities establish reconstructive comb spectroscopy as a new platform for gas sensing, with broad applicability in remote atmospheric monitoring, industrial leak detection, and standoff chemical-threat identification.

physics.optics↗

High-speed hyperspectral 3D ghost imaging LiDAR

Light detection and ranging (LiDAR) is widely used in autonomous systems and industrial metrology; however, the simultaneous acquisition of three-dimensional (3D) structure and broadband spectral information remains challenging, as conventional hyperspectral LiDAR relies on wavelength-scanning or spectrometer-based detection that limits speed. Here, we demonstrate a hyperspectral 3D ghost imaging LiDAR that eliminates these bottlenecks. By combining a stochastic broadband laser with single-pixel detection, and integrating spatiotemporal encoding with spectral ghost imaging in a time-of-flight framework, the system enables pulse-resolved recovery of spatial and spectral information. Consequently, we achieve a line-scanning rate of 60.5 MHz (point rate 1.8 GHz) and a ranging precision of 0.02 mm within a 10 μs integration time. Each voxel contains a 1.4 nm resolution spectrum over 1100-1250 nm, enabling simultaneous 3D imaging and chemical identification. This approach provides a route to high-speed hyperspectral LiDAR for environmental monitoring, precision agriculture, and industrial inspection.

physics.optics↗

Dual-comb correlation spectroscopy reveals laser dynamics

Laser dynamics underpin a broad range of modern photonic technologies and continue to reveal rich nonlinear behaviors. However, existing spectroscopic tools, most notably time-stretched dispersive Fourier transform spectroscopy (TS-DFT), remain limited in spectral resolution, accuracy, and their ability to capture continuous waveforms and complex field dynamics. Here, we introduce dual-comb correlation spectroscopy (DCCS) as a powerful approach for resolving fast and intricate laser behaviors that are inaccessible to TS-DFT and conventional spectrometers. By correlating two sequences of heterodyne spectra produced by mixing a test laser with a pair of optical combs, DCCS enables rapid (e.g., 1 us) and high-resolution (0.08 pm) spectral retrieval over broad optical bandwidths. Leveraging these capabilities, we reveal mode-hopping and mode-competition dynamics in continuous-wave lasers, as well as the buildup process of a mode-locked laser. These results establish DCCS as a versatile and complementary tool to TS-DFT for exploring transient, broadband, and previously unresolvable behaviors in lasers and other time-evolving optical systems.

physics.optics↗

Rapid and precise distance measurement using balanced cross-correlation of a single frequency-modulated electro-optic comb

Ultra-rapid, high-precision distance metrology is critical for both advanced scientific research and practical applications. However, current light detection and ranging technologies struggle to simultaneously achieve high measurement speed, accuracy, and a large non-ambiguity range. Here, we present a time-of-flight optical ranging technique based on a repetition-frequency-modulated femtosecond electro-optic comb and balanced nonlinear cross-correlation detection. In this approach, a target distance is determined as an integer multiple of the comb repetition period. By rapidly sweeping the comb repetition frequency, we achieve absolute distance measurements within 500 ns and real-time displacement tracking at single-pulse resolution (corresponding to a refresh rate of 172 MHz). Furthermore, our system attains an ultimate ranging precision of 5 nm (with 0.3 s integration time). Our method uniquely integrates nanometer-scale precision, megahertz-level refresh rates, and a theoretically unlimited ambiguity range within a single platform, while also supporting multi-target detection. These advances pave the way for high-speed, high-precision ranging systems in emerging applications such as structural health monitoring, industrial manufacturing, and satellite formation flying.

physics.optics↗