arXiv subjects

Zhuozhu Jian

Publications and source records attributed to Zhuozhu Jian.

8 recordsLinked to original sources

arXiv2024

Range-SLAM: Ultra-Wideband-Based Smoke-Resistant Real-Time Localization and Mapping

This paper presents Range-SLAM, a real-time, lightweight SLAM system designed to address the challenges of localization and mapping in environments with smoke and other harsh conditions using Ultra-Wideband (UWB) signals. While optical sensors like LiDAR and cameras struggle in low-visibility environments, UWB signals provide a robust alternative for real-time positioning. The proposed system uses general UWB devices to achieve accurate mapping and localization without relying on expensive LiDAR or other dedicated hardware. By utilizing only the distance and Received Signal Strength Indicator (RSSI) provided by UWB sensors in relation to anchors, we combine the motion of the tag-carrying agent with raycasting algorithm to construct a 2D occupancy grid map in real time. To enhance localization in challenging conditions, a Weighted Least Squares (WLS) method is employed. Extensive real-world experiments, including smoke-filled environments and simulated

cs.RO↗

arXiv2024

LVCP: LiDAR-Vision Tightly Coupled Collaborative Real-time Relative Positioning

In air-ground collaboration scenarios without GPS and prior maps, the relative positioning of drones and unmanned ground vehicles (UGVs) has always been a challenge. For a drone equipped with monocular camera and an UGV equipped with LiDAR as an external sensor, we propose a robust and real-time relative pose estimation method (LVCP) based on the tight coupling of vision and LiDAR point cloud information, which does not require prior information such as maps or precise initial poses. Given that large-scale point clouds generated by 3D sensors has more accurate spatial geometric information than the feature point cloud generated by image, we utilize LiDAR point clouds to correct the drift in visual-inertial odometry (VIO) when the camera undergoes significant shaking or the IMU has a low signal-to-noise ratio. To achieve this, we propose a novel coarse-to-fine framework for LiDAR-vision collaborative localization. In this framework, we construct point-plane association based on spatial geometric information, and innovatively construct a point-aided Bundle Adjustment (BA) problem as the backend to simultaneously estimate the relative pose of the camera and LiDAR and correct the VIO drift. In this process, we propose a particle swarm optimization (PSO) based sampling algorithm to complete the coarse estimation of the current camera-LiDAR pose. In this process, the initial pose of the camera used for sampling is obtained based on VIO propagation, and the valid feature-plane association number (VFPN) is used to trigger PSO-sampling process. Additionally, we propose a method that combines Structure from Motion (SFM) and multi-level sampling to initialize the algorithm, addressing the challenge of lacking initial values.

cs.RO↗

arXiv2023

Path Generation for Wheeled Robots Autonomous Navigation on Vegetated Terrain

Wheeled robot navigation has been widely used in urban environments, but little research has been conducted on its navigation in wild vegetation. External sensors (LiDAR, camera etc.) are often used to construct point cloud map of the surrounding environment, however, the supporting rigid ground used for travelling cannot be detected due to the occlusion of vegetation. This often causes unsafe or not smooth path during planning process. To address the drawback, we propose the PE-RRT* algorithm, which effectively combines a novel support plane estimation method and sampling algorithm to generate real-time feasible and safe path in vegetation environments. In order to accurately estimate the support plane, we combine external perception and proprioception, and use Multivariate Gaussian Processe Regression (MV-GPR) to estimate the terrain at the sampling nodes. We build a physical experimental platform and conduct experiments in different outdoor environments. Experimental results show that our method has high safety, robustness and generalization.

cs.RO↗

arXiv2023

Hybrid Trajectory Optimization for Autonomous Terrain Traversal of Articulated Tracked Robots

Autonomous terrain traversal of articulated tracked robots can reduce operator cognitive load to enhance task efficiency and facilitate extensive deployment. We present a novel hybrid trajectory optimization method aimed at generating efficient, stable, and smooth traversal motions. To achieve this, we develop a planar robot-terrain contact model and divide the robot's motion into hybrid modes of driving and traversing. By using a generalized coordinate description, the configuration space dimension is reduced, which facilitates real-time planning. The hybrid trajectory optimization is transcribed into a nonlinear programming problem and divided into subproblems to be solved in a receding-horizon planning fashion. Mode switching is facilitated by associating optimized motion durations with a predefined traversal sequence. A multi-objective cost function is formulated to further improve the traversal performance. Additionally, map sampling, terrain simplification, and tracking controller modules are integrated into the autonomous terrain traversal system. Our approach is validated in simulation and real-world scenarios with the Searcher robotic platform. Comparative experiments with expert operator control and state-of-the-art methods show advantages in terms of time and energy efficiency, stability, and smoothness of motion.

cs.RO↗

arXiv2023

RH-Map: Online Map Construction Framework of Dynamic Objects Removal Based on Region-wise Hash Map Structure

Mobile robots navigating in outdoor environments frequently encounter the issue of undesired traces left by dynamic objects and manifested as obstacles on map, impeding robots from achieving accurate localization and effective navigation. To tackle the problem, a novel map construction framework based on 3D region-wise hash map structure (RH-Map) is proposed, consisting of front-end scan fresher and back-end removal modules, which realizes real-time map construction and online dynamic object removal (DOR). First, a two-layer 3D region-wise hash map structure of map management is proposed for effective online DOR. Then, in scan fresher, region-wise ground plane estimation (R-GPE) is adopted for estimating and preserving ground information and Scan-to-Map Removal (S2M-R) is proposed to discriminate and remove dynamic regions. Moreover, the lightweight back-end removal module maintaining keyframes is proposed for further DOR. As experimentally verified on SemanticKITTI, our proposed framework yields promising performance on online DOR of map construction compared with the state-of-the-art methods. And we also validate the proposed framework in real-world environments.

cs.RO↗

arXiv2023

Quadruped Guidance Robot for the Visually Impaired: A Comfort-Based Approach

Guidance robots that can guide people and avoid various obstacles, could potentially be owned by more visually impaired people at a fairly low cost. Most of the previous guidance robots for the visually impaired ignored the human response behavior and comfort, treating the human as an appendage dragged by the robot, which can lead to imprecise guidance of the human and sudden changes in the traction force experienced by the human. In this paper, we propose a novel quadruped guidance robot system with a comfort-based concept. We design a controllable traction device that can adjust the length and force between human and robot to ensure comfort. To allow the human to be guided safely and comfortably to the target position in complex environments, our proposed human motion planner can plan the traction force with the force-based human motion model. To track the planned force, we also propose a robot motion planner that can generate the specific robot motion command and design the force control device. Our system has been deployed on Unitree Laikago quadrupedal platform and validated in real-world scenarios.

cs.RO↗

arXiv2022

PUTN: A Plane-fitting based Uneven Terrain Navigation Framework

Autonomous navigation of ground robots has been widely used in indoor structured 2D environments, but there are still many challenges in outdoor 3D unstructured environments, especially in rough, uneven terrains. This paper proposed a plane-fitting based uneven terrain navigation framework (PUTN) to solve this problem. The implementation of PUTN is divided into three steps. First, based on Rapidly-exploring Random Trees (RRT), an improved sample-based algorithm called Plane Fitting RRT* (PF-RRT*) is proposed to obtain a sparse trajectory. Each sampling point corresponds to a custom traversability index and a fitted plane on the point cloud. These planes are connected in series to form a traversable strip. Second, Gaussian Process Regression is used to generate traversability of the dense trajectory interpolated from the sparse trajectory, and the sampling tree is used as the training set. Finally, local planning is performed using nonlinear model predictive control (NMPC). By adding the traversability index and uncertainty to the cost function, and adding obstacles generated by the real-time point cloud to the constraint function, a safe motion planning algorithm with smooth speed and strong robustness is available. Experiments in real scenarios are conducted to verify the effectiveness of the method. The source code is released for the reference of the community.

cs.RO↗

arXiv2022

Dynamic Control Barrier Function-based Model Predictive Control to Safety-Critical Obstacle-Avoidance of Mobile Robot

This paper presents an efficient and safe method to avoid static and dynamic obstacles based on LiDAR. First, point cloud is used to generate a real-time local grid map for obstacle detection. Then, obstacles are clustered by DBSCAN algorithm and enclosed with minimum bounding ellipses (MBEs). In addition, data association is conducted to match each MBE with the obstacle in the current frame. Considering MBE as an observation, Kalman filter (KF) is used to estimate and predict the motion state of the obstacle. In this way, the trajectory of each obstacle in the forward time domain can be parameterized as a set of ellipses. Due to the uncertainty of the MBE, the semi-major and semi-minor axes of the parameterized ellipse are extended to ensure safety. We extend the traditional Control Barrier Function (CBF) and propose Dynamic Control Barrier Function (D-CBF). We combine D-CBF with Model Predictive Control (MPC) to implement safety-critical dynamic obstacle avoidance. Experiments in simulated and real scenarios are conducted to verify the effectiveness of our algorithm. The source code is released for the reference of the community.

cs.RO↗