arXiv subjects

Ziang Liu

Publications and source records attributed to Ziang Liu.

48 records · Page 3Linked to original sources

arXiv2022

$λ$-MIMO: Massive MIMO via Modulo Sampling

Massive multiple-input multiple-output (M-MIMO) architecture is the workhorse of modern communication systems. Currently, two fundamental bottlenecks, namely, power consumption and receiver saturation, limit the full potential achievement of this technology. These bottlenecks are intricately linked with the analog-to-digital converter (ADC) used in each radio frequency (RF) chain. The power consumption in MIMO systems grows exponentially with the ADC's bit budget while ADC saturation causes permanent loss of information. This motivates the need for a solution that can simultaneously tackle the above-mentioned bottlenecks while offering advantages over existing alternatives such as low-resolution ADCs. Taking a radically different approach to this problem, we propose $λ$-MIMO architecture which uses modulo ADCs ($M_λ$-ADC) instead of a conventional ADC. Our work is inspired by the Unlimited Sampling Framework. $M_λ$-ADC in the RF chain folds high dynamic range signals into low dynamic range modulo samples, thus alleviating the ADC saturation problem. At the same time, digitization of modulo signal results in high resolution quantization. In the novel $λ$-MIMO context, we discuss baseband signal reconstruction, detection and uplink achievable sum-rate performance. The key takeaways of our work include, (a) leveraging higher signal-to-quantization noise ratio (SQNR), (b) detection and average uplink sum-rate performances comparable to a conventional, infinite-resolution ADC when using a $1$-$2$ bit $M_λ$-ADC. This enables higher order modulation schemes e.g. $1024$ QAM that seemed previously impossible, (c) superior trade-off between energy efficiency and bit budget, thus resulting in higher power efficiency. Numerical simulations and modulo ADC based hardware experiments corroborate our theory and reinforce the clear benefits of $λ$-MIMO approach.

cs.IT↗

arXiv2022

RainNet: A Large-Scale Imagery Dataset and Benchmark for Spatial Precipitation Downscaling

AI-for-science approaches have been applied to solve scientific problems (e.g., nuclear fusion, ecology, genomics, meteorology) and have achieved highly promising results. Spatial precipitation downscaling is one of the most important meteorological problem and urgently requires the participation of AI. However, the lack of a well-organized and annotated large-scale dataset hinders the training and verification of more effective and advancing deep-learning models for precipitation downscaling. To alleviate these obstacles, we present the first large-scale spatial precipitation downscaling dataset named RainNet, which contains more than $62,400$ pairs of high-quality low/high-resolution precipitation maps for over $17$ years, ready to help the evolution of deep learning models in precipitation downscaling. Specifically, the precipitation maps carefully collected in RainNet cover various meteorological phenomena (e.g., hurricane, squall), which is of great help to improve the model generalization ability. In addition, the map pairs in RainNet are organized in the form of image sequences ($720$ maps per month or 1 map/hour), showing complex physical properties, e.g., temporal misalignment, temporal sparse, and fluid properties. Furthermore, two deep-learning-oriented metrics are specifically introduced to evaluate or verify the comprehensive performance of the trained model (e.g., prediction maps reconstruction accuracy). To illustrate the applications of RainNet, 14 state-of-the-art models, including deep models and traditional approaches, are evaluated. To fully explore potential downscaling solutions, we propose an implicit physical estimation benchmark framework to learn the above characteristics. Extensive experiments demonstrate the value of RainNet in training and evaluating downscaling models. Our dataset is available at https://neuralchen.github.io/RainNet/.

cs.CV↗

arXiv2022

Inferring Articulated Rigid Body Dynamics from RGBD Video

Being able to reproduce physical phenomena ranging from light interaction to contact mechanics, simulators are becoming increasingly useful in more and more application domains where real-world interaction or labeled data are difficult to obtain. Despite recent progress, significant human effort is needed to configure simulators to accurately reproduce real-world behavior. We introduce a pipeline that combines inverse rendering with differentiable simulation to create digital twins of real-world articulated mechanisms from depth or RGB videos. Our approach automatically discovers joint types and estimates their kinematic parameters, while the dynamic properties of the overall mechanism are tuned to attain physically accurate simulations. Control policies optimized in our derived simulation transfer successfully back to the original system, as we demonstrate on a simulated system. Further, our approach accurately reconstructs the kinematic tree of an articulated mechanism being manipulated by a robot, and highly nonlinear dynamics of a real-world coupled pendulum mechanism. Website: https://eric-heiden.github.io/video2sim

cs.RO↗

arXiv2022

BEHAVIOR in Habitat 2.0: Simulator-Independent Logical Task Description for Benchmarking Embodied AI Agents

Robots excel in performing repetitive and precision-sensitive tasks in controlled environments such as warehouses and factories, but have not been yet extended to embodied AI agents providing assistance in household tasks. Inspired by the catalyzing effect that benchmarks have played in the AI fields such as computer vision and natural language processing, the community is looking for new benchmarks for embodied AI. Prior work in embodied AI benchmark defines tasks using a different formalism, often specific to one environment, simulator or domain, making it hard to develop general and comparable solutions. In this work, we bring a subset of BEHAVIOR activities into Habitat 2.0 to benefit from its fast simulation speed, as a first step towards demonstrating the ease of adapting activities defined in the logic space into different simulators.

cs.AI↗

arXiv2021

Unified Style Transfer

Currently, it is hard to compare and evaluate different style transfer algorithms due to chaotic definitions of style and the absence of agreed objective validation methods in the study of style transfer. In this paper, a novel approach, the Unified Style Transfer (UST) model, is proposed. With the introduction of a generative model for internal style representation, UST can transfer images in two approaches, i.e., Domain-based and Image-based, simultaneously. At the same time, a new philosophy based on the human sense of art and style distributions for evaluating the transfer model is presented and demonstrated, called Statistical Style Analysis. It provides a new path to validate style transfer models' feasibility by validating the general consistency between internal style representation and art facts. Besides, the translation-invariance of AdaIN features is also discussed.

cs.CV↗

arXiv2021

Robotic Lime Picking by Considering Leaves as Permeable Obstacles

The problem of robotic lime picking is challenging; lime plants have dense foliage which makes it difficult for a robotic arm to grasp a lime without coming in contact with leaves. Existing approaches either do not consider leaves, or treat them as obstacles and completely avoid them, often resulting in undesirable or infeasible plans. We focus on reaching a lime in the presence of dense foliage by considering the leaves of a plant as 'permeable obstacles' with a collision cost. We then adapt the rapidly exploring random tree star (RRT*) algorithm for the problem of fruit harvesting by incorporating the cost of collision with leaves into the path cost. To reduce the time required for finding low-cost paths to goal, we bias the growth of the tree using an artificial potential field (APF). We compare our proposed method with prior work in a 2-D environment and a 6-DOF robot simulation. Our experiments and a real-world demonstration on a robotic lime picking task demonstrate the applicability of our approach.

cs.RO↗

arXiv2020

Image Translation via Fine-grained Knowledge Transfer

Prevailing image-translation frameworks mostly seek to process images via the end-to-end style, which has achieved convincing results. Nonetheless, these methods lack interpretability and are not scalable on different image-translation tasks (e.g., style transfer, HDR, etc.). In this paper, we propose an interpretable knowledge-based image-translation framework, which realizes the image-translation through knowledge retrieval and transfer. In details, the framework constructs a plug-and-play and model-agnostic general purpose knowledge library, remembering task-specific styles, tones, texture patterns, etc. Furthermore, we present a fast ANN searching approach, Bandpass Hierarchical K-Means (BHKM), to cope with the difficulty of searching in the enormous knowledge library. Extensive experiments well demonstrate the effectiveness and feasibility of our framework in different image-translation tasks. In particular, backtracking experiments verify the interpretability of our method. Our code soon will be available at https://github.com/AceSix/Knowledge_Transfer.

cs.CV↗

arXiv2020

CooGAN: A Memory-Efficient Framework for High-Resolution Facial Attribute Editing

In contrast to great success of memory-consuming face editing methods at a low resolution, to manipulate high-resolution (HR) facial images, i.e., typically larger than 7682 pixels, with very limited memory is still challenging. This is due to the reasons of 1) intractable huge demand of memory; 2) inefficient multi-scale features fusion. To address these issues, we propose a NOVEL pixel translation framework called Cooperative GAN(CooGAN) for HR facial image editing. This framework features a local path for fine-grained local facial patch generation (i.e., patch-level HR, LOW memory) and a global path for global lowresolution (LR) facial structure monitoring (i.e., image-level LR, LOW memory), which largely reduce memory requirements. Both paths work in a cooperative manner under a local-to-global consistency objective (i.e., for smooth stitching). In addition, we propose a lighter selective transfer unit for more efficient multi-scale features fusion, yielding higher fidelity facial attributes manipulation. Extensive experiments on CelebAHQ well demonstrate the memory efficiency as well as the high image generation quality of the proposed framework.

cs.CV↗

arXiv2020

Pool-Based Unsupervised Active Learning for Regression Using Iterative Representativeness-Diversity Maximization (iRDM)

Active learning (AL) selects the most beneficial unlabeled samples to label, and hence a better machine learning model can be trained from the same number of labeled samples. Most existing active learning for regression (ALR) approaches are supervised, which means the sampling process must use some label information, or an existing regression model. This paper considers completely unsupervised ALR, i.e., how to select the samples to label without knowing any true label information. We propose a novel unsupervised ALR approach, iterative representativeness-diversity maximization (iRDM), to optimally balance the representativeness and the diversity of the selected samples. Experiments on 12 datasets from various domains demonstrated its effectiveness. Our iRDM can be applied to both linear regression and kernel regression, and it even significantly outperforms supervised ALR when the number of labeled samples is small.

cs.LG↗

arXiv2020

Integrating Informativeness, Representativeness and Diversity in Pool-Based Sequential Active Learning for Regression

In many real-world machine learning applications, unlabeled samples are easy to obtain, but it is expensive and/or time-consuming to label them. Active learning is a common approach for reducing this data labeling effort. It optimally selects the best few samples to label, so that a better machine learning model can be trained from the same number of labeled samples. This paper considers active learning for regression (ALR) problems. Three essential criteria -- informativeness, representativeness, and diversity -- have been proposed for ALR. However, very few approaches in the literature have considered all three of them simultaneously. We propose three new ALR approaches, with different strategies for integrating the three criteria. Extensive experiments on 12 datasets in various domains demonstrated their effectiveness.

cs.LG↗

arXiv2020

Physics-based Simulation of Continuous-Wave LIDAR for Localization, Calibration and Tracking

Light Detection and Ranging (LIDAR) sensors play an important role in the perception stack of autonomous robots, supplying mapping and localization pipelines with depth measurements of the environment. While their accuracy outperforms other types of depth sensors, such as stereo or time-of-flight cameras, the accurate modeling of LIDAR sensors requires laborious manual calibration that typically does not take into account the interaction of laser light with different surface types, incidence angles and other phenomena that significantly influence measurements. In this work, we introduce a physically plausible model of a 2D continuous-wave LIDAR that accounts for the surface-light interactions and simulates the measurement process in the Hokuyo URG-04LX LIDAR. Through automatic differentiation, we employ gradient-based optimization to estimate model parameters from real sensor measurements.

cs.CV↗

arXiv2020

Unsupervised Pool-Based Active Learning for Linear Regression

In many real-world machine learning applications, unlabeled data can be easily obtained, but it is very time-consuming and/or expensive to label them. So, it is desirable to be able to select the optimal samples to label, so that a good machine learning model can be trained from a minimum amount of labeled data. Active learning (AL) has been widely used for this purpose. However, most existing AL approaches are supervised: they train an initial model from a small amount of labeled samples, query new samples based on the model, and then update the model iteratively. Few of them have considered the completely unsupervised AL problem, i.e., starting from zero, how to optimally select the very first few samples to label, without knowing any label information at all. This problem is very challenging, as no label information can be utilized. This paper studies unsupervised pool-based AL for linear regression problems. We propose a novel AL approach that considers simultaneously the informativeness, representativeness, and diversity, three essential criteria in AL. Extensive experiments on 14 datasets from various application domains, using three different linear regression models (ridge regression, LASSO, and linear support vector regression), demonstrated the effectiveness of our proposed approach.

cs.LG↗