arXiv subjects

Ziang Wang

Publications and source records attributed to Ziang Wang.

18 recordsLinked to original sources

arXiv2026

Realization of Air-Stable Two-Dimensional Superconductor Nb2Pd3Te5 With Quasi-One-Dimensional Pair Density Modulation

Two-dimensional (2D) superconductors provide a fertile platform for exploring reduced-dimensional superconductivity and emergent quantum phenomena. Incorporating quasi-one-dimensional (quasi-1D) structural motifs into 2D superconductors offers a powerful route to engineer strong electronic anisotropy, enabling unconventional superconducting states and anisotropic superconducting transport functionalities. However, such systems remain rarely realized. Here we report the realization of a 2D superconductor Nb2Pd3Te5, exhibiting an intrinsic quasi-1D pair density modulation. Monolayer and bilayer Nb2Pd3Te5 is synthesized via van-der-Waals epitaxy. Using ultralow-temperature scanning tunneling microscopy/spectroscopy, we observe the quasi-1D crystal structure and superconductivity below ~0.6 K with a pronounced quasi-1D pair density modulation. Remarkably, both monolayer and bilayer Nb2Pd3Te5 show strong air stability. Our findings establish atomically 2D Nb2Pd3Te5 as a robust and promising platform for exploring novel low-dimensional quantum phenomena and anisotropy-enabled superconducting devices.

cond-mat.mtrl-sci↗

arXiv2026

Zero-Clustering Geometry in Realistic Fractional Quantum Hall Wave Functions

The clustering pattern of zeros in the ground state of a fractional quantum Hall system is a defining feature of its topological properties. We analyze the geometrical fluctuations of the zeros around individual electrons and propose to use the displacement ratio of the zeros to visualize and measure the distance of a realistic state to a model wave function. The distribution of the zero displacement ratio behaves like an order parameter in the transition from a Laughlin phase to a topologically trivial one. The statistical comparison between quantum Hall states belonging to different Jain sequences leads to a composite fermion fluid description of the $\nu = 1/5$ ground state with long-range Coulomb interaction that agrees almost perfectly for as few as $3$-$5$ electrons, overcoming the long-standing difficulties of accommodating the competing liquid and crystal orders at short distances.

cond-mat.str-el↗

arXiv2026

Integrating Factual and Normative Industrial Knowledge via Constraint-Aware Graph Attention for Process Plan Recommendation

Integrating heterogeneous industrial knowledge, including factual relations and decision constraints, remains a core challenge in industrial information systems. Machining process planning exemplifies this problem because engineers must select operations by combining material properties, feature characteristics, and quality requirements. Existing methods rely mainly on similarity retrieval or classification, without a unified ranking objective or standardized evaluation. We propose PCA-GAT, which formulates machining process plan recommendation as a knowledge graph enhanced collaborative filtering problem. Bayesian Personalized Ranking provides the learning objective, while Recall@K and NDCG@K define evaluation. The knowledge graph supplies semantic structure when collaborative signals are sparse. Four domain constraints, material compatibility, precision requirements, feature applicability, and operation sequencing, are introduced as attention biases during graph propagation. Type-specific weights learn their importance, and an adaptive gate adjusts their influence using local context. On a real aerospace dataset with 115 parts and 507 plans, PCA-GAT achieves Recall@1 = 0.9087 and strong cold-start robustness, with about half the degradation of the strongest baseline under severe sparsity. Ablation studies show that knowledge graph enrichment is essential, constraints add value, and ungated constraint injection can hurt performance. The learned weights identify material-operation compatibility as the dominant factor, consistent with domain expertise. Results on three public benchmarks show no degradation when constraints are absent, supporting generalization beyond manufacturing. This study establishes a standardized recommendation protocol for engineering process planning and benchmarks seven methods across three categories, showing that knowledge representation is the main bottleneck.

cs.AI↗

arXiv2026

Physically Verifiable Evidence and LLM-Based Reporting for Bearing Fault Diagnosis

Trustworthy deployment of AI-based diagnosis in safety-critical mechanical systems hinges on validation: whether a prediction can be checked against physical reality before it is acted upon. Current intelligent fault diagnosers fail this standard in two ways. Their standard output, a class label with a softmax confidence score, is an internal statistic of the classifier, offering nothing checkable against independent physical knowledge; and the growing use of generative language models in maintenance reporting adds a second risk: hallucinated content entering reports on which decisions rest. Taking bearing fault diagnosis as the testbed, this work addresses both problems from the output side. The proposed Diagnostic Evidence Network (DENet) is an encoder-agnostic multi-task framework extending the output to a structured evidence record: the classification, a predicted characteristic frequency comparable against the theoretical value determined by bearing geometry and shaft speed, and a temporal localization of transient impulses inspectable on the raw waveform. Across four encoders and three public datasets, this evidence incurs no statistically significant accuracy cost, with a frequency error of about 6 Hz on 1,024-point segments where spectral estimation is structurally inapplicable. Centrally, the deviation between predicted and theoretical frequency constitutes a label-free, inference-time validation signal: it detects misclassifications with AUROC values of 0.970 and 0.871, and remains discriminative in the high-confidence regime where confidence-derived detectors are blind. Finally, a QLoRA-adapted language model is constrained to translate, but never generate, diagnostic content, reducing unsupported-claim rates from 10-12% to 2% and eliminating fabricated quantities.

cs.LG↗

arXiv2026

A physics-informed foundation model for quantitative diffusion MRI

Understanding the human brain requires access to its microscopic tissue architecture. Diffusion magnetic resonance imaging (MRI) provides the only noninvasive window into whole-brain microstructure in vivo, yet reliable quantitative mapping remains confined to specialized research settings requiring dense sampling and optimized acquisition protocols. To address this gap, we present a physics-informed generative microstructure network (PIGMENT) that learns a universal generative prior of human brain microstructure and adapts it zero-shot to each participant's measured data to recover subject-specific maps. Trained on 11375 scans spanning multiple sites, vendors, and field strengths, PIGMENT enabled reliable quantitative mapping for tensor, kurtosis, and NODDI models across external datasets from five independent centers. It remains effective where conventional fitting becomes unreliable, recovering meaningful maps from extremely sparse acquisitions while supporting downstream tractography and structural connectivity mapping. PIGMENT estimates demonstrated strong biological validity, preserving submillimeter cortical microarchitectural patterns and early-childhood white matter developmental trajectories from 10-fold accelerated scans. Furthermore, PIGMENT enables reliable quantitative tensor mapping on cost-efficient low-field systems and the extraction of tumor-related biomarkers using ultra-fast clinical protocols. Together, these results establish PIGMENT as a physics-informed foundation model that extends quantitative diffusion MRI into regimes traditionally too sparse, heterogeneous, or clinically constrained for reliable analysis.

eess.IV↗

arXiv2026

SesQ: A Surface Electrostatic Simulator for Precise Energy Participation Ratio Simulation in Superconducting Qubits

An accurate and efficient numerical electromagnetic model for superconducting qubits is essential for characterizing and minimizing design-dependent dielectric losses. The energy participation ratio (EPR) is the commonly adopted metric used to evaluate these losses, but its calculation presents a severe multiscale computational challenge. Conventional finite element method (FEM) requires 3D volumetric meshing, leading to prohibitive computational costs and memory requirements when attempting to capture singular electric fields at nanometer-thin material interfaces. To address this bottleneck, we propose SesQ, a surface integral equation simulator tailored for the precise simulation of the EPR. By applying discretization on 2D surfaces, deriving a semi-analytical multilayer Green's function, and employing a dedicated non-conformal boundary mesh refinement scheme, SesQ accurately resolves singular edge fields without an explosive growth in the number of unknowns. Validations with analytically solvable models demonstrate that SesQ accelerates capacitance extraction by roughly two orders of magnitude compared to commercial FEM tools. While achieving comparable accuracy for capacitance extraction, SesQ delivers superior precision for EPR calculation. Simulations of practical transmon qubits further reveal that FEM approaches tend to significantly underestimate the EPR. Finally, the high efficiency of SesQ enables rapid iteration in the layout optimization, as demonstrated by minimizing the EPR of the qubit pattern, establishing the simulator as a powerful tool for the automated design of low-loss superconducting quantum circuits.

quant-ph↗

arXiv2026

E2Former-V2: On-the-Fly Equivariant Attention with Linear Activation Memory

Equivariant Graph Neural Networks (EGNNs) have become a widely used approach for modeling 3D atomistic systems. However, mainstream architectures face critical scalability bottlenecks due to the explicit construction of geometric features or dense tensor products on \textit{every} edge. To overcome this, we introduce \textbf{E2Former-V2}, a scalable architecture that integrates algebraic sparsity with hardware-aware execution. We first propose \textbf{E}quivariant \textbf{A}xis-\textbf{A}ligned \textbf{S}parsification (EAAS). EAAS builds on Wigner-$6j$ convolution by exploiting an $\mathrm{SO}(3) \rightarrow \mathrm{SO}(2)$ change of basis to transform computationally expensive dense tensor contractions into efficient, sparse parity re-indexing operations. Building on this representation, we introduce \textbf{On-the-Fly Equivariant Attention}, a fully node-centric mechanism implemented via a custom fused Triton kernel. By eliminating materialized edge tensors and maximizing SRAM utilization, our kernel achieves a \textbf{20$\times$ improvement in TFLOPS} compared to standard implementations. Extensive experiments on the SPICE and OMol25 datasets demonstrate that E2Former-V2 maintains comparable predictive performance while notably accelerating inference. This work demonstrates that large equivariant transformers can be trained efficiently using widely accessible GPU platforms. The code is avalible at https://github.com/IQuestLab/UBio-MolFM/tree/e2formerv2.

cs.LG↗

arXiv2025

Quantum Design Automation: Foundations, Challenges, and the Road Ahead

Quantum computing is transitioning from laboratory research to industrial deployment, yet significant challenges persist: system scalability and performance, fabrication yields, and the advancement of algorithms and applications. We emphasize that in building quantum computers -- spanning quantum chips, system integration, instruction sets, algorithms, and middleware such as quantum error correction schemes -- design is everywhere. In this paper, we advocate for a holistic design perspective in quantum computing, a perspective we argue is pivotal to unlocking innovative co-design opportunities and addressing the aforementioned key challenges. To equip readers with sufficient background for exploring co-optimization opportunities, we detail how interconnected computational methods and tools collaborate to enable end-to-end quantum computer design. This coverage encompasses critical stages -- such as chip layout design automation, high-fidelity system-level simulation, Hamiltonian derivation for quantum system modeling, control pulse simulation, decoherence analysis, and physical verification and testing -- followed by quantum instruction set design. We then proceed to quantum system and software development, including quantum circuit synthesis, quantum error correction and fault tolerance, and logic verification and testing. Through these discussions, we illustrate with concrete examples -- including co-optimizing quantum instruction sets with algorithmic considerations, customizing error correction circuits to hardware-specific constraints, and streamlining quantum chip design through tailored code design, among others. We hope that the detailed end-to-end design workflow as well as these examples will foster dialogue between the hardware and software communities, ultimately facilitating the translation of meaningful research findings into future quantum hardware implementations.

quant-ph↗

arXiv2025

DIME-Net: A Dual-Illumination Adaptive Enhancement Network Based on Retinex and Mixture-of-Experts

Image degradation caused by complex lighting conditions such as low-light and backlit scenarios is commonly encountered in real-world environments, significantly affecting image quality and downstream vision tasks. Most existing methods focus on a single type of illumination degradation and lack the ability to handle diverse lighting conditions in a unified manner. To address this issue, we propose a dual-illumination enhancement framework called DIME-Net. The core of our method is a Mixture-of-Experts illumination estimator module, where a sparse gating mechanism adaptively selects suitable S-curve expert networks based on the illumination characteristics of the input image. By integrating Retinex theory, this module effectively performs enhancement tailored to both low-light and backlit images. To further correct illumination-induced artifacts and color distortions, we design a damage restoration module equipped with Illumination-Aware Cross Attention and Sequential-State Global Attention mechanisms. In addition, we construct a hybrid illumination dataset, MixBL, by integrating existing datasets, allowing our model to achieve robust illumination adaptability through a single training process. Experimental results show that DIME-Net achieves competitive performance on both synthetic and real-world low-light and backlit datasets without any retraining. These results demonstrate its generalization ability and potential for practical multimedia applications under diverse and complex illumination conditions.

cs.CV↗

arXiv2025

Zero Trust Cybersecurity: Procedures and Considerations in Context

In response to the increasing complexity and sophistication of cyber threats, particularly those enhanced by advancements in artificial intelligence, traditional security methods are proving insufficient. This paper explores the Zero Trust cybersecurity framework, which operates on the principle of never trust, always verify to mitigate vulnerabilities within organizations. Specifically, it examines the applicability of Zero Trust principles in environments where large volumes of information are exchanged, such as schools and libraries. The discussion highlights the importance of continuous authentication, least privilege access, and breach assumption. The findings underscore avenues for future research that may help preserve the security of these vulnerable organizations.

cs.CR↗

arXiv2025

Technical Report on classification of literature related to children speech disorder

This technical report presents a natural language processing (NLP)-based approach for systematically classifying scientific literature on childhood speech disorders. We retrieved and filtered 4,804 relevant articles published after 2015 from the PubMed database using domain-specific keywords. After cleaning and pre-processing the abstracts, we applied two topic modeling techniques - Latent Dirichlet Allocation (LDA) and BERTopic - to identify latent thematic structures in the corpus. Our models uncovered 14 clinically meaningful clusters, such as infantile hyperactivity and abnormal epileptic behavior. To improve relevance and precision, we incorporated a custom stop word list tailored to speech pathology. Evaluation results showed that the LDA model achieved a coherence score of 0.42 and a perplexity of -7.5, indicating strong topic coherence and predictive performance. The BERTopic model exhibited a low proportion of outlier topics (less than 20%), demonstrating its capacity to classify heterogeneous literature effectively. These results provide a foundation for automating literature reviews in speech-language pathology.

cs.CL↗

arXiv2024

A MARL Based Multi-Target Tracking Algorithm Under Jamming Against Radar

Unmanned aerial vehicles (UAVs) have played an increasingly important role in military operations and social life. Among all application scenarios, multi-target tracking tasks accomplished by UAV swarms have received extensive attention. However, when UAVs use radar to track targets, the tracking performance can be severely compromised by jammers. To track targets in the presence of jammers, UAVs can use passive radar to position the jammer. This paper proposes a system where a UAV swarm selects the radar's active or passive work mode to track multiple differently located and potentially jammer-carrying targets. After presenting the optimization problem and proving its solving difficulty, we use a multi-agent reinforcement learning algorithm to solve this control problem. We also propose a mechanism based on simulated annealing algorithm to avoid cases where UAV actions violate constraints. Simulation experiments demonstrate the effectiveness of the proposed algorithm.

eess.SY↗

arXiv2024

EDBooks: AI-Enhanced Interactive Narratives for Programming Education

Large Language Models (LLMs) have shown the potential to be valuable teaching tools, with the potential of giving every student a personalized tutor. However, one challenge with using LLMs to learn new concepts is that when learning a topic in an unfamiliar domain, it can be difficult to know what questions to ask. Further, language models do not always encourage "active learning" where students can test and assess their understanding. In this paper, we propose ways to combine large language models with "traditional" learning materials (like e-books) to give readers the benefits of working with LLMs (the ability to ask personally interesting questions and receive personalized answers) with the benefits of a traditional e-book (having a structure and content that is pedagogically sound). This work shows one way that LLMs have the potential to improve learning materials and make personalized programming education more accessible to a broader audience.

cs.HC↗

arXiv2024

SuperGrad: a differentiable simulator for superconducting processors

One significant advantage of superconducting processors is their extensive design flexibility, which encompasses various types of qubits and interactions. Given the large number of tunable parameters of a processor, the ability to perform gradient optimization would be highly beneficial. Efficient backpropagation for gradient computation requires a tightly integrated software library, for which no open-source implementation is currently available. In this work, we introduce SuperGrad, a simulator that accelerates the design of superconducting quantum processors by incorporating gradient computation capabilities. SuperGrad offers a user-friendly interface for constructing Hamiltonians and computing both static and dynamic properties of composite systems. This differentiable simulation is valuable for a range of applications, including optimal control, design optimization, and experimental data fitting. In this paper, we demonstrate these applications through examples and code snippets.

quant-ph↗

arXiv2024

High coherence fluxonium manufactured with a wafer-scale uniformity process

Fluxonium qubits are recognized for their high coherence times and high operation fidelities, attributed to their unique design incorporating a superinductor, which is typically implemented using an array of over 100 Josephson junctions. However, this complexity poses significant fabrication challenges, particularly in achieving high yield and junction uniformity with traditional methods. Here, we introduce an overlap process for Josephson junction fabrication that achieves nearly 100% yield and maintains uniformity across a 2-inch wafer with less than 5% variation for the phase slip junction and less than 2% for the entire junction array. We use a compact junction array design that achieves state-of-the-art dielectric loss tangents and flux noise levels, as confirmed by multiple devices. This enables fluxonium qubits to reach energy relaxation times exceeding 1 millisecond at the flux frustration point. This work paves the way for scalable high coherence fluxonium processors using CMOS-compatible processes, marking a significant step towards practical quantum computing.

quant-ph↗

arXiv2023

Superconducting processor design optimization for quantum error correction performance

In the quest for fault-tolerant quantum computation using superconducting processors, accurate performance assessment and continuous design optimization stands at the forefront. To facilitate both meticulous simulation and streamlined design optimization, we introduce a multi-level simulation framework that spans both Hamiltonian and quantum error correction levels, and is equipped with the capability to compute gradients efficiently. This toolset aids in design optimization, tailored to specific objectives like quantum memory performance. Within our framework, we investigate the often-neglected spatially correlated unitary errors, highlighting their significant impact on logical error rates. We exemplify our approach through the multi-path coupling scheme of fluxonium qubits.

quant-ph↗

arXiv2023

ChatGPT and a New Academic Reality: Artificial Intelligence-Written Research Papers and the Ethics of the Large Language Models in Scholarly Publishing

This paper discusses OpenAIs ChatGPT, a generative pre-trained transformer, which uses natural language processing to fulfill text-based user requests (i.e., a chatbot). The history and principles behind ChatGPT and similar models are discussed. This technology is then discussed in relation to its potential impact on academia and scholarly research and publishing. ChatGPT is seen as a potential model for the automated preparation of essays and other types of scholarly manuscripts. Potential ethical issues that could arise with the emergence of large language models like GPT-3, the underlying technology behind ChatGPT, and its usage by academics and researchers, are discussed and situated within the context of broader advancements in artificial intelligence, machine learning, and natural language processing for research and scholarly publishing.

cs.CL↗

arXiv2020

Integrating Semantic and Structural Information with Graph Convolutional Network for Controversy Detection

Identifying controversial posts on social media is a fundamental task for mining public sentiment, assessing the influence of events, and alleviating the polarized views. However, existing methods fail to 1) effectively incorporate the semantic information from content-related posts; 2) preserve the structural information for reply relationship modeling; 3) properly handle posts from topics dissimilar to those in the training set. To overcome the first two limitations, we propose Topic-Post-Comment Graph Convolutional Network (TPC-GCN), which integrates the information from the graph structure and content of topics, posts, and comments for post-level controversy detection. As to the third limitation, we extend our model to Disentangled TPC-GCN (DTPC-GCN), to disentangle topic-related and topic-unrelated features and then fuse dynamically. Extensive experiments on two real-world datasets demonstrate that our models outperform existing methods. Analysis of the results and cases proves that our models can integrate both semantic and structural information with significant generalizability.

cs.CL↗