arXiv subjects

Zibin Liu

Publications and source records attributed to Zibin Liu.

At least 19 recordsLinked to original sources

arXiv2026

Minimal Solvers for Full-DoF Motion Estimation from Asynchronous Differential SfM

As a bio-inspired intelligent sensor, event cameras have introduced a new paradigm in the intelligent perception of spatiotemporal information and visual motion estimation, characterized by their high temporal resolution, low latency, and minimal power consumption. However, their asynchronous data streams present significant challenges to traditional synchronous, frame-based algorithms. To address these challenges, this paper presents a novel framework for full degree of freedom (DoF) egomotion estimation directly from asynchronous optical flow, specifically targeting the joint recovery of angular and linear velocities. We decouple the differential epipolar constraint into distinct angular and linear velocity components, and derive its formulation for asynchronous data. Based on this formulation, an optimization algorithm is developed that enables full-DoF egomotion estimation leveraging at least five points. Furthermore, by applying a first-order approximation to rotational dynamics, we transform the constraint equations into a polynomial form, resulting in the first algebraic minimal 5-point solver for this formulation. To ensure real-time performance in high-speed scenarios, we additionally propose an accelerated solver achieved by truncating high-order angular velocity terms. Extensive evaluations on both synthetic and real-world datasets demonstrate that the asynchronous approach outperforms traditional synchronous methods, particularly in its accuracy and robustness to spatiotemporal noise. We believe that this work establishes a critical foundation for efficient and accurate continuous-time motion estimation in high-speed robotics applications.

cs.CV↗

arXiv2026

A Geometric Framework for Absolute Pose and Velocity Estimation with Event Cameras

Despite the rapid advancements in event-based motion estimation, current geometric methods primarily focus on velocity estimation. However, absolute pose estimation, which is equally crucial for key applications such as robotic navigation and augmented reality, remains relatively underexplored. Consequently, the simultaneous recovery of absolute pose and velocity from event streams remains an open and challenging problem. To address this gap, we propose a geometric framework for absolute pose and velocity estimation by leveraging 3D lines in the scene and the events they trigger. At the core of the framework lie two key geometric constraints: the orthogonality between a 3D line and the normal vector of its corresponding event plane, and the collinearity of an event with the 2D projection of its associated line. Based on these constraints, we present both linear and polynomial solvers for absolute pose estimation. The former enables efficient computation, while the latter provides a globally optimal solution for rotation. For velocity estimation, we develop an efficient linear solver and a more accurate optimization-based solver to recover both angular and linear velocities. Notably, our methods require a minimum of three event-line correspondences to determine the 6-DoF absolute pose or velocities independently. Extensive experiments in simulation and on real-world datasets demonstrate that our methods achieve state-of-the-art performance, with significant improvements in accuracy and computational efficiency compared to existing methods. The demo code is publicly available at https://github.com/Zibin6/EventPoseVelocity.

cs.CV↗

arXiv2026

An Opticalmechanics Framework for Dynamic Estimation of Multibody Systems

Conventional dynamics analysis of the human body is often constrained by the need for contact force and torque sensors and controlled laboratory environments. To address this issue, this study proposes an opticalmechanics kinematic-dynamic integrated estimation framework for multibody systems. Specifically, a constrained multibody model is established to describe the system dynamics, while image-measured kinematic quantities are used as non contact inputs for dynamic estimation. The unknown joint torque is then identified through a genetic-algorithm based optimization by minimizing the discrepancy between model-predicted and image-measured kinematic quan tities. Experimental validation on an air-bearing platform showed that the wrist joint torque estimated from image data achieved a mean absolute error of 0.46 Nm compared with sensor measurements. In the forward prediction test, the model-predicted angular velocity achieved a mean absolute error of 0.006 rad/s relative to the image-measured results. This study demonstrates the potential of combining image measurement and mechanical modeling for non-contact dynamic estimation in scenarios where direct force and torque measurement is difficult.

cs.CV↗

arXiv2026

Event-Based Method for High-Speed 3D Deformation Measurement under Extreme Illumination Conditions

Background: Large engineering structures, such as space launch towers and suspension bridges, are subjected to extreme forces that cause high-speed 3D deformation and compromise safety. These structures typically operate under extreme illumination conditions. Traditional cameras often struggle to handle strong light intensity, leading to overexposure due to their limited dynamic range. Objective: Event cameras have emerged as a compelling alternative to traditional cameras in high dynamic range and low-latency applications. This paper presents an integrated method, from calibration to measurement, using a multi-event camera array for high-speed 3D deformation monitoring of structures in extreme illumination conditions. Methods: Firstly, the proposed method combines the characteristics of the asynchronous event stream and temporal correlation analysis to extract the corresponding marker center point. Subsequently, the method achieves rapid calibration by solving the Kruppa equations in conjunction with a parameter optimization framework. Finally, by employing a unified coordinate transformation and linear intersection, the method enables the measurement of 3D deformation of the target structure. Results: Experiments confirmed that the relative measurement error is below 0.08%. Field experiments under extreme illumination conditions, including self-calibration of a multi-event camera array and 3D deformation measurement, verified the performance of the proposed method. Conclusions: This paper addressed the critical limitation of traditional cameras in measuring high-speed 3D deformations under extreme illumination conditions. The experimental results demonstrate that, compared to other methods, the proposed method can accurately measure 3D deformations of structures under harsh lighting conditions, and the relative error of the measured deformation is less than 0.1%.

cs.CV↗

arXiv2025

A Minimal Solver for Relative Pose Estimation with Unknown Focal Length from Two Affine Correspondences

In this paper, we aim to estimate the relative pose and focal length between two views with known intrinsic parameters except for an unknown focal length from two affine correspondences (ACs). Cameras are commonly used in combination with inertial measurement units (IMUs) in applications such as self-driving cars, smartphones, and unmanned aerial vehicles. The vertical direction of camera views can be obtained by IMU measurements. The relative pose between two cameras is reduced from 5DOF to 3DOF. We propose a new solver to estimate the 3DOF relative pose and focal length. First, we establish constraint equations from two affine correspondences when the vertical direction is known. Then, based on the properties of the equation system with nontrivial solutions, four equations can be derived. These four equations only involve two parameters: the focal length and the relative rotation angle. Finally, the polynomial eigenvalue method is utilized to solve the problem of focal length and relative rotation angle. The proposed solver is evaluated using synthetic and real-world datasets. The results show that our solver performs better than the existing state-of-the-art solvers.

cs.CV↗

arXiv2025

LECalib: Line-Based Event Camera Calibration

Camera calibration is an essential prerequisite for event-based vision applications. Current event camera calibration methods typically involve using flashing patterns, reconstructing intensity images, and utilizing the features extracted from events. Existing methods are generally time-consuming and require manually placed calibration objects, which cannot meet the needs of rapidly changing scenarios. In this paper, we propose a line-based event camera calibration framework exploiting the geometric lines of commonly-encountered objects in man-made environments, e.g., doors, windows, boxes, etc. Different from previous methods, our method detects lines directly from event streams and leverages an event-line calibration model to generate the initial guess of camera parameters, which is suitable for both planar and non-planar lines. Then, a non-linear optimization is adopted to refine camera parameters. Both simulation and real-world experiments have demonstrated the feasibility and accuracy of our method, with validation performed on monocular and stereo event cameras. The source code is released at https://github.com/Zibin6/line_based_event_camera_calib.

cs.CV↗

arXiv2025

Optical Flow-Guided 6DoF Object Pose Tracking with an Event Camera

Object pose tracking is one of the pivotal technologies in multimedia, attracting ever-growing attention in recent years. Existing methods employing traditional cameras encounter numerous challenges such as motion blur, sensor noise, partial occlusion, and changing lighting conditions. The emerging bio-inspired sensors, particularly event cameras, possess advantages such as high dynamic range and low latency, which hold the potential to address the aforementioned challenges. In this work, we present an optical flow-guided 6DoF object pose tracking method with an event camera. A 2D-3D hybrid feature extraction strategy is firstly utilized to detect corners and edges from events and object models, which characterizes object motion precisely. Then, we search for the optical flow of corners by maximizing the event-associated probability within a spatio-temporal window, and establish the correlation between corners and edges guided by optical flow. Furthermore, by minimizing the distances between corners and edges, the 6DoF object pose is iteratively optimized to achieve continuous pose tracking. Experimental results of both simulated and real events demonstrate that our methods outperform event-based state-of-the-art methods in terms of both accuracy and robustness.

cs.CV↗

arXiv2025

Globally Optimal Solution to the Generalized Relative Pose Estimation Problem using Affine Correspondences

Mobile devices equipped with a multi-camera system and an inertial measurement unit (IMU) are widely used nowadays, such as self-driving cars. The task of relative pose estimation using visual and inertial information has important applications in various fields. To improve the accuracy of relative pose estimation of multi-camera systems, we propose a globally optimal solver using affine correspondences to estimate the generalized relative pose with a known vertical direction. First, a cost function about the relative rotation angle is established after decoupling the rotation matrix and translation vector, which minimizes the algebraic error of geometric constraints from affine correspondences. Then, the global optimization problem is converted into two polynomials with two unknowns based on the characteristic equation and its first derivative is zero. Finally, the relative rotation angle can be solved using the polynomial eigenvalue solver, and the translation vector can be obtained from the eigenvector. Besides, a new linear solution is proposed when the relative rotation is small. The proposed solver is evaluated on synthetic data and real-world datasets. The experiment results demonstrate that our method outperforms comparable state-of-the-art methods in accuracy.

cs.CV↗

arXiv2025

Flexible Camera Calibration using a Collimator System

Camera calibration is a crucial step in photogrammetry and 3D vision applications. This paper introduces a novel camera calibration method using a designed collimator system. Our collimator system provides a reliable and controllable calibration environment for the camera. Exploiting the unique optical geometry property of our collimator system, we introduce an angle invariance constraint and further prove that the relative motion between the calibration target and camera conforms to a spherical motion model. This constraint reduces the original 6DOF relative motion between target and camera to a 3DOF pure rotation motion. Using spherical motion constraint, a closed-form linear solver for multiple images and a minimal solver for two images are proposed for camera calibration. Furthermore, we propose a single collimator image calibration algorithm based on the angle invariance constraint. This algorithm eliminates the requirement for camera motion, providing a novel solution for flexible and fast calibration. The performance of our method is evaluated in both synthetic and real-world experiments, which verify the feasibility of calibration using the collimator system and demonstrate that our method is superior to existing baseline methods. Demo code is available at https://github.com/LiangSK98/CollimatorCalibration

cs.CV↗

arXiv2025

Collimator-assisted high-precision calibration method for event cameras

Event cameras are a new type of brain-inspired visual sensor with advantages such as high dynamic range and high temporal resolution. The geometric calibration of event cameras, which involves determining their intrinsic and extrinsic parameters, particularly in long-range measurement scenarios, remains a significant challenge. To address the dual requirements of long-distance and high-precision measurement, we propose an event camera calibration method utilizing a collimator with flickering star-based patterns. The proposed method first linearly solves camera parameters using the sphere motion model of the collimator, followed by nonlinear optimization to refine these parameters with high precision. Through comprehensive real-world experiments across varying conditions, we demonstrate that the proposed method consistently outperforms existing event camera calibration methods in terms of accuracy and reliability.

cs.CV↗

arXiv2025

Asynchronous Event Stream Noise Filtering for High-frequency Structure Deformation Measurement

Large-scale structures suffer high-frequency deformations due to complex loads. However, harsh lighting conditions and high equipment costs limit measurement methods based on traditional high-speed cameras. This paper proposes a method to measure high-frequency deformations by exploiting an event camera and LED markers. Firstly, observation noise is filtered based on the characteristics of the event stream generated by LED markers blinking and spatiotemporal correlation. Then, LED markers are extracted from the event stream after differentiating between motion-induced events and events from LED blinking, which enables the extraction of high-speed moving LED markers. Ultimately, high-frequency planar deformations are measured by a monocular event camera. Experimental results confirm the accuracy of our method in measuring high-frequency planar deformations.

cs.CV↗

arXiv2025

Beyond Training: Enabling Self-Evolution of Agents with MOBIMEM

Large Language Model (LLM) agents are increasingly deployed to automate complex workflows in mobile and desktop environments. However, current model-centric agent architectures struggle to self-evolve post-deployment: improving personalization, capability, and efficiency typically requires continuous model retraining/fine-tuning, which incurs prohibitive computational overheads and suffers from an inherent trade-off between model accuracy and inference efficiency. To enable iterative self-evolution without model retraining, we propose MOBIMEM, a memory-centric agent system. MOBIMEM first introduces three specialized memory primitives to decouple agent evolution from model weights: (1) Profile Memory uses a lightweight distance-graph (DisGraph) structure to align with user preferences, resolving the accuracy-latency trade-off in user profile retrieval; (2) Experience Memory employs multi-level templates to instantiate execution logic for new tasks, ensuring capability generalization; and (3) Action Memory records fine-grained interaction sequences, reducing the reliance on expensive model inference. Building upon this memory architecture, MOBIMEM further integrates a suite of OS-inspired services to orchestrate execution: a scheduler that coordinates parallel sub-task execution and memory operations; an agent record-and-replay (AgentRR) mechanism that enables safe and efficient action reuse; and a context-aware exception handling that ensures graceful recovery from user interruptions and runtime errors. Evaluation on AndroidWorld and top-50 apps shows that MOBIMEM achieves 83.1% profile alignment with 23.83 ms retrieval time (280x faster than GraphRAG baselines), improves task success rates by up to 50.3%, and reduces end-to-end latency by up to 9x on mobile devices.

cs.AI↗

arXiv2025

Optimal Pose Guidance for Stereo Calibration in 3D Deformation Measurement

Stereo optical measurement techniques, such as digital image correlation (DIC), are widely used in 3D deformation measurement as non-contact, full-field measurement methods, in which stereo calibration is a crucial step. However, current stereo calibration methods lack intuitive optimal pose guidance, leading to inefficiency and suboptimal accuracy in deformation measurements. The aim of this study is to develop an interactive calibration framework that automatically generates the next optimal pose, enabling high-accuracy stereo calibration for 3D deformation measurement. We propose a pose optimization method that introduces joint optimization of relative and absolute extrinsic parameters, with the minimization of the covariance matrix trace adopted as the loss function to solve for the next optimal pose. Integrated with this method is a user-friendly graphical interface, which guides even non-expert users to capture qualified calibration images. Our proposed method demonstrates superior efficiency (requiring fewer images) and accuracy (demonstrating lower measurement errors) compared to random pose, while maintaining robustness across varying FOVs. In the thermal deformation measurement tests on an S-shaped specimen, the results exhibit high agreement with finite element analysis (FEA) simulations in both deformation magnitude and evolutionary trends. We present a pose guidance method for high-precision stereo calibration in 3D deformation measurement. The simulation experiments, real-world experiments, and thermal deformation measurement applications all demonstrate the significant application potential of our proposed method in the field of 3D deformation measurement. Keywords: Stereo calibration, Optimal pose guidance, 3D deformation measurement, Digital image correlation

cs.CV↗

arXiv2025

Get Experience from Practice: LLM Agents with Record & Replay

AI agents, empowered by Large Language Models (LLMs) and communication protocols such as MCP and A2A, have rapidly evolved from simple chatbots to autonomous entities capable of executing complex, multi-step tasks, demonstrating great potential. However, the LLMs' inherent uncertainty and heavy computational resource requirements pose four significant challenges to the development of safe and efficient agents: reliability, privacy, cost and performance. Existing approaches, like model alignment, workflow constraints and on-device model deployment, can partially alleviate some issues but often with limitations, failing to fundamentally resolve these challenges. This paper proposes a new paradigm called AgentRR (Agent Record & Replay), which introduces the classical record-and-replay mechanism into AI agent frameworks. The core idea is to: 1. Record an agent's interaction trace with its environment and internal decision process during task execution, 2. Summarize this trace into a structured "experience" encapsulating the workflow and constraints, and 3. Replay these experiences in subsequent similar tasks to guide the agent's behavior. We detail a multi-level experience abstraction method and a check function mechanism in AgentRR: the former balances experience specificity and generality, while the latter serves as a trust anchor to ensure completeness and safety during replay. In addition, we explore multiple application modes of AgentRR, including user-recorded task demonstration, large-small model collaboration and privacy-aware agent execution, and envision an experience repository for sharing and reusing knowledge to further reduce deployment cost.

cs.LG↗

arXiv2025

Full-DoF Egomotion Estimation for Event Cameras Using Geometric Solvers

For event cameras, current sparse geometric solvers for egomotion estimation assume that the rotational displacements are known, such as those provided by an IMU. Thus, they can only recover the translational motion parameters. Recovering full-DoF motion parameters using a sparse geometric solver is a more challenging task, and has not yet been investigated. In this paper, we propose several solvers to estimate both rotational and translational velocities within a unified framework. Our method leverages event manifolds induced by line segments. The problem formulations are based on either an incidence relation for lines or a novel coplanarity relation for normal vectors. We demonstrate the possibility of recovering full-DoF egomotion parameters for both angular and linear velocities without requiring extra sensor measurements or motion priors. To achieve efficient optimization, we exploit the Adam framework with a first-order approximation of rotations for quick initialization. Experiments on both synthetic and real-world data demonstrate the effectiveness of our method. The code is available at https://github.com/jizhaox/relpose-event.

cs.CV↗

arXiv2025

The Tenth NTIRE 2025 Efficient Super-Resolution Challenge Report

This paper presents a comprehensive review of the NTIRE 2025 Challenge on Single-Image Efficient Super-Resolution (ESR). The challenge aimed to advance the development of deep models that optimize key computational metrics, i.e., runtime, parameters, and FLOPs, while achieving a PSNR of at least 26.90 dB on the $\operatorname{DIV2K\_LSDIR\_valid}$ dataset and 26.99 dB on the $\operatorname{DIV2K\_LSDIR\_test}$ dataset. A robust participation saw \textbf{244} registered entrants, with \textbf{43} teams submitting valid entries. This report meticulously analyzes these methods and results, emphasizing groundbreaking advancements in state-of-the-art single-image ESR techniques. The analysis highlights innovative approaches and establishes benchmarks for future research in the field.

cs.CV↗

arXiv2025

Stereo Event-based, 6-DOF Pose Tracking for Uncooperative Spacecraft

Pose tracking of uncooperative spacecraft is an essential technology for space exploration and on-orbit servicing, which remains an open problem. Event cameras possess numerous advantages, such as high dynamic range, high temporal resolution, and low power consumption. These attributes hold the promise of overcoming challenges encountered by conventional cameras, including motion blur and extreme illumination, among others. To address the standard on-orbit observation missions, we propose a line-based pose tracking method for uncooperative spacecraft utilizing a stereo event camera. To begin with, we estimate the wireframe model of uncooperative spacecraft, leveraging the spatio-temporal consistency of stereo event streams for line-based reconstruction. Then, we develop an effective strategy to establish correspondences between events and projected lines of uncooperative spacecraft. Using these correspondences, we formulate the pose tracking as a continuous optimization process over 6-DOF motion parameters, achieved by minimizing event-line distances. Moreover, we construct a stereo event-based uncooperative spacecraft motion dataset, encompassing both simulated and real events. The proposed method is quantitatively evaluated through experiments conducted on our self-collected dataset, demonstrating an improvement in terms of effectiveness and accuracy over competing methods. The code will be open-sourced at https://github.com/Zibin6/SE6PT.

cs.CV↗

arXiv2024

Line-based 6-DoF Object Pose Estimation and Tracking With an Event Camera

Pose estimation and tracking of objects is a fundamental application in 3D vision. Event cameras possess remarkable attributes such as high dynamic range, low latency, and resilience against motion blur, which enables them to address challenging high dynamic range scenes or high-speed motion. These features make event cameras an ideal complement over standard cameras for object pose estimation. In this work, we propose a line-based robust pose estimation and tracking method for planar or non-planar objects using an event camera. Firstly, we extract object lines directly from events, then provide an initial pose using a globally-optimal Branch-and-Bound approach, where 2D-3D line correspondences are not known in advance. Subsequently, we utilize event-line matching to establish correspondences between 2D events and 3D models. Furthermore, object poses are refined and continuously tracked by minimizing event-line distances. Events are assigned different weights based on these distances, employing robust estimation algorithms. To evaluate the precision of the proposed methods in object pose estimation and tracking, we have devised and established an event-based moving object dataset. Compared against state-of-the-art methods, the robustness and accuracy of our methods have been validated both on synthetic experiments and the proposed dataset. The source code is available at https://github.com/Zibin6/LOPET.

cs.CV↗