arXiv subjects

Zichao Fan

Publications and source records attributed to Zichao Fan.

6 recordsLinked to original sources

arXiv2023

Pupil aberrations correction of the afocal telescope for the TianQin project

TianQin is a planned Chinese space-based gravitational wave (GW) observatory with a frequency band of 10-4 to 1Hz. Optical telescopes are essential for the delivery of the measurement beam to support a precise distance measurement between pairs of proof masses. As the design is driven by the interferometric displacement sensitivity requirements, the stability control of optical path length (OPL) is extremely important beyond the traditional requirement of diffraction-limited imaging quality. In a telescope system, the recurring tilt-to-length (TTL) coupling noise arises from the OPL variation due to the wavefront deformation and angular misalignment. The pupil aberrations are preferred option to understand the OPL specifications and further suppress TTL coupling noise. To correct the pupil aberrations, we derive primary pupil aberrations in a series expansion form, and then refine the formulation of merit function by combining the pupil aberration theory and traditional image aberration theory. The automatic correction of pupil aberrations is carried out by using the macro programming in the commercial optical software Zemax, leading to a high performance telescope design. The design results show that on one side the pupil aberrations have been corrected, and on the other side, its optical performance meets the requirements for TianQin project. The RMS wavefront error over the science field of view (FOV) is less than λ/200 and the maximum TTL coupling noise over the entire 300 urad FOV is 0.0034nm/urad. We believe that our design approach can be a good guide for the space telescope design in any other space-based GW detection project, as well as other similar optical systems.

astro-ph.IM↗

arXiv2022

Paraxial design of four-component zoom lens system with fixed distance between focal points by matrix optics

In this paper, we propose a systematic approach to design a four-component zoom system with fixed spacing between focal points based on matrix optics. Since the more complex model the higher degree of freedom it has, the task of determining the zoom trajectory is meaningful and challenging. The elements of the system matrix imply the working state of the optical system, and axial displacement equation for the desired zoom system are derived by restricting specific matrix elements. Properly selected trajectory of the particular component described by means of a parametric function can make the model become solvable explicitly. Then the paraxial design problem is transformed into the optimization of these parameters with regard to the merit functions encompassing the primary aberration terms, compactness, smoothness of the trajectories. We adopt Particle Swarm Optimization (PSO) algorithm to globally optimize the parameters to retrieve the optimum zoom trajectory in specific design criteria. The proposed method is demonstrated through two numerical examples under different configurations. The simulation results demonstrate that our proposed method can be a practical and powerful tool for paraxial design of complex multi-group zoom optical systems.

physics.optics↗

arXiv2022

Recommended high performance telescope system design for the TianQin project

China is planning to construct a new space-borne gravitational-wave (GW) observatory, the TianQin project, in which the spaceborne telescope is an important component in laser interferometry. The telescope is aimed to transmit laser beams between the spacecrafts for the measurement of the displacements between proof-masses in long arms. The telescope should have ultra-small wavefront deviation to minimize noise caused by pointing error, ultra-stable structure to minimize optical path noise caused by temperature jitter, ultra-high stray light suppression ability to eliminate background noise. In this paper, we realize a telescope system design with ultra-stable structure as well as ultra-low wavefront distortion for the space-based GW detection mission. The design requirements demand extreme control of high image quality and extraordinary stray light suppression ability. Based on the primary aberration theory, the initial structure design of the mentioned four-mirror optical system is explored. After optimization, the maximum RMS wavefront error is less than lamda/300 over the full field of view (FOV), which meets the noise budget on the telescope design. The stray light noise caused by the back reflection of the telescope is also analyzed. The noise at the position of optical bench is less than 10-10 of the transmitted power, satisfying the requirements of space gravitational-wave detection. We believe that our design can be a good candidate for TianQin project, and can also be a good guide for the space telescope design in any other similar science project.

physics.optics↗

arXiv2021

Optical design of the laser launch telescope via physical optics theorem for Laser Guide Star Facility

The Laser Guide Star Facility (LGSF), as the most important part of the adaptive optics system of the large ground-based telescope, is aimed to generate multiple laser guide stars at the sodium layer. Laser Launch Telescope is employed to implement this requirement by projecting the Gauss beam to the sodium layer with a small beam size in LGSF system. As the diffraction and interference effects of laser's long-distance transmission, the conventional optical design based on the geometrical optics mechanism cannot achieve the expected laser propagation. In this paper, we propose a method to design optical system for laser launch telescope based on the physical optics theorem to generate an acceptable light spot at the sodium layer in the atmosphere. Besides, a tolerance analysis method based on physical optics propagation is also demonstrated to be necessitated to optimize the system's instrumentation performance. The numerical results show that the optical design considering physical optics propagation is highly rewarding and even necessitated in many occasions, especially for laser beam propagation systems.

astro-ph.IM↗

arXiv2019

Multi-surface catadioptric freeform lens design for ultra-efficient off-axis road illumination

We propose a novel design methodology to tackle the multi-surface catadioptric freeform lens design for off-axis road illumination applications based on an ideal source. The lens configuration contains an analytic refractive entrance surface, an analytic total internal reflective (TIR) surface and two freeform exit surfaces. A curl-free energy equipartition is established between the source and target plane and divided to implement the composite ray mapping mechanism. Furthermore, the analytic TIR surface and refractive entrance surface are optimized for the minimal Fresnel losses and surface error based on genetic algorithm (GA). The results show a significant improvement on illuminance uniformity and ultra-high transfer efficiency compared to our proposed result in [Zhu et al., Opt. Exp. 26, A54-A65 (2018)].

physics.optics↗

arXiv2019

Automated first-order design of double-sided telecentric zoom systems based on PSO algorithms

In this paper, we propose a new approach to automatically retrieve the first-order design of double-sided telecentric zoom systems with high efficiency based on Particle Swarm Optimization (PSO) algorithms. We transform the design problem to realize a zoom lens system with fixed positions of both the front focal point and the rear focal point during zooming. We demonstrate that the proposed algorithm is much more efficient than the Monte Carlo algorithm in designing zoom systems with two fixed foci as well as a given zoom ratio. Furthermore, a compact first-order design of three-component 4X zoom system with two fixed foci is proposed to show the high efficiency and great potential of our proposed algorithm in searching proper first-order configuration for complex optical systems.

physics.optics↗