SearcharxivSearch

arXiv subjects

Zichen Xi

Publications and source records attributed to Zichen Xi.

12 recordsLinked to original sources

Scaling Mixture-of-Experts Video Pretraining for Embodied Intelligence

Despite the recent promise in robot control, video generative models suffer from a domain mismatch due to their primary focus on content creation. For example, their design inherently prioritizes visual fidelity and creativity over computational efficiency and physical realism. In this work, we present LingBot-Video, a DiT-based video pretraining paradigm specifically tailored for embodied intelligence. From the architecture perspective, we adopt the Mixture-of-Experts (MoE), instead of dense, framework to achieve a better trade-off between modeling capacity and inference efficiency, and manage to scale it up from scratch. From the data perspective, we construct a data profiling engine that augments standard internet videos with extensive robot-oriented footage, encompassing manipulation, navigation, and egocentric perspectives, to equip the base model with an intrinsic understanding of actions and world dynamics. From the training perspective, we develop a multi-dimensional reward system to enforce the alignment regarding physical rationality and task completion, going beyond standard criteria such as aesthetics, prompt-following, and motion consistency. Comprehensive evaluations validate its performance and efficiency as a video foundation model. We contribute LingBot-Video as the inaugural large-scale, open-source MoE video foundation model to the community, in a pioneering effort to bridge digital creativity and physical actuation.

cs.CV

Nonlinear exceptional points in an integrated acoustic-wave oscillator for longwave infrared sensing

Exceptional points (EP) featuring enhanced responsivity and rich dynamics have attracted extensive attentions in device developments and sensing applications. However, it remains debated whether employing EP systems is beneficial in practical sensing applications. Here, we demonstrate that a nonlinear EP in our microwave-frequency acoustic-wave oscillator improves longwave infrared (LWIR) detection under practical conditions. By phase tuning the nonlinear gain, our detector can be operated at different conditions with respect to the nonlinear EP. Compared with operation away from EP, our detector at EP shows a 33-fold improvement in responsivity and an 8.75-fold extension of 3-dB bandwidth. We observe a 6-fold enhancement in signal-to-noise ratio at an input modulation frequency of 6.2 kHz. At the incident LWIR wavelength of 9.6 um, our detector at EP exhibits a noise equivalent power (NEP) of 310 pW*Hz^-1/2 at input frequency of 10 kHz, yielding a figure of merit, product of NEP and time constant, of 9.87*10^-3 pW*Hz^-3/2, a 10-fold improvement over operation away from EP. Our integrated acoustic devices offer a versatile platform for exploring noise dynamics and developing practical sensors that exploit non-Hermitian nonlinearities.

physics.optics

Low-loss phononic integrated circuits based on a silicon nitride-lithium niobate platform

Microwave-frequency acoustic waves in solids have emerged as a versatile platform for both classical and quantum applications. While phononic integrated devices and circuits are being developed on various material platforms, an ideal phononic integrated circuit (PnIC) platform should simultaneously support low-loss waveguide structures, high-quality-factor resonators, high-performance modulators, and efficient electromechanical transducers. Here, we establish a low-loss gigahertz-frequency PnIC platform based on patterned thin-film silicon nitride (SiN) on lithium niobate (LN) substrate. We develop low-loss PnIC building blocks including waveguides, directional couplers, and high-quality-factor (high-Q) ring resonators. As an application, we demonstrate a 1-GHz phononic oscillator based on a ring resonator, reaching a low phase noise of -159.0 dBc/Hz at a 100-kHz offset frequency. Our low-loss PnICs could meet the requirements in microwave acoustics, quantum phononics, and integrated hybrid systems combining phonons, photons, superconducting qubits, and solid-state defects.

physics.app-ph

Resonance-enhanced integrated acousto-optic beam steering

Optical beam steering is a key technology for free-space optical communication, sensing, and imaging. Mechanical beam steering systems suffer from limited scanning speed and bulky form factors, while existing solid-state solutions rely on pixelated synthetic aperture that requires complex fabrication and control architectures. Integrated acousto-optic beam steering (AOBS) is an emerging technology that enables continuous one-dimensional beam steering using integrated acoustic transducers and fixed-wavelength laser sources. Here, we integrate AOBS with an optical ring resonator on the same thin-film lithium niobate (TFLN) platform to significantly enhance beam steering efficiency and system functionality. The resulting device achieves a resonance-enhanced beam steering efficiency of up to $26\%$ and a field of view of $18^\circ$. Moreover, by leveraging integrated electro-optic control, we dynamically lock the ring-resonator's resonance to a chirped laser frequency, enabling frequency-modulated continuous-wave (FMCW) LiDAR operation. By combining lithium niobate's piezoelectric and electro-optic properties, this work establishes a compact, efficient, and scalable beam-steering platform with co-integrated acousto-optic modulation and electro-optic control for multifunctional applications.

physics.app-ph

FlowSSC: Universal Generative Monocular Semantic Scene Completion via One-Step Latent Diffusion

Semantic Scene Completion (SSC) from monocular RGB images is a fundamental yet challenging task due to the inherent ambiguity of inferring occluded 3D geometry from a single view. While feed-forward methods have made progress, they often struggle to generate plausible details in occluded regions and preserve the fundamental spatial relationships of objects. Such accurate generative reasoning capability for the entire 3D space is critical in real-world applications. In this paper, we present FlowSSC, the first generative framework applied directly to monocular semantic scene completion. FlowSSC treats the SSC task as a conditional generation problem and can seamlessly integrate with existing feed-forward SSC methods to significantly boost their performance. To achieve real-time inference without compromising quality, we introduce Shortcut Flow-matching that operates in a compact triplane latent space. Unlike standard diffusion models that require hundreds of steps, our method utilizes a shortcut mechanism to achieve high-fidelity generation in a single step, enabling practical deployment in autonomous systems. Extensive experiments on SemanticKITTI demonstrate that FlowSSC achieves state-of-the-art performance, significantly outperforming existing baselines.

cs.CV

Microwave-acoustic-based isolated gate driver for power electronics

Electrical isolation is critical to ensure safety and minimize electromagnetic interference (EMI), yet existing methods struggle to simultaneously transmit power and signals through a unified channel. Here we demonstrate a mechanically-isolated gate driver based on microwave-frequency surface acoustic wave (SAW) device on lithium niobate that achieves galvanic isolation of 2.75 kV with ultralow isolation capacitance (0.032 pF) over 1.25 mm mechanical propagation length, delivering 13.4 V open-circuit voltage and 44.4 mA short-circuit current. We demonstrate isolated gate driving for a gallium nitride (GaN) high-electron-mobility transistor, achieving a turn-on time of 108.8 ns comparable to commercial drivers and validate its operation in a buck converter. In addition, our SAW device operates over an ultrawide temperature range from 0.5 K (-272.6 {\deg}C) to 544 K (271 {\deg}C). The microwave-frequency SAW devices offer inherent EMI immunity and potential for heterogeneous integration on multiple semiconductor platforms, enabling compact, high-performance isolated power and signal transmission in advanced power electronics.

eess.SY

On-chip cavity electro-acoustics using lithium niobate phononic crystal resonators

Mechanical systems are pivotal in quantum technologies because of their long coherent time and versatile coupling to qubit systems. So far, the coherent and dynamic control of gigahertz-frequency mechanical modes mostly relies on optomechanical coupling and piezoelectric coupling to superconducting qubits. Here, we demonstrate on-chip cavity electro-acoustic dynamics using our microwave-frequency electrically-modulated phononic-crystal (PnC) resonators on lithium niobate (LN). Leveraging the high dispersion of PnC, our phononic modes space unevenly in the frequency spectrum, emulating atomic energy levels. Atomic-like transitions between different phononic modes are achieved by applying electrical fields to modulate phononic modes via nonlinear piezoelectricity of LN. Among two modes, we demonstrate Autler-Townes splitting (ATS), alternating current (a.c.) Stark shift, and Rabi oscillation with a maximum cooperativity of 4.18. Extending to three modes, we achieve non-reciprocal frequency conversions with an isolation up to 20 dB. Nonreciprocity can be tuned by the time delay between the two modulating pulses. Our cavity electro-acoustic platform could find broad applications in sensing, microwave signal processing, phononic computing, and quantum acoustics.

cond-mat.mes-hall

Injection locking of GHz-frequency surface acoustic wave phononic crystal oscillator

Low-noise gigahertz (GHz) frequencies sources are essential for applications in signal processing, sensing, and telecommunications. Surface acoustic wave (SAW) resonator-based oscillators offer compact form factors and low phase noise due to their short mechanical wavelengths and high quality (Q) factors. However, their small footprint makes them vulnerable to environmental variation, resulting in their poor long-term frequency stability. Injection locking is widely used to suppress frequency drift of lasers and oscillators by synchronizing to an ultra-stable reference. Here, we demonstrate injection locking of a 1-GHz SAW phononic crystal oscillator, achieving 40-dB phase noise reduction at low offset frequencies and unperturbed low noise at large offset frequencies. Compared to a free-running SAW oscillator, which typically exhibits frequency drifts of several hundred hertz over minutes, the injection-locked oscillator reduces the frequency deviation to below 0.35 Hz. We also investigate the locking range and oscillator dynamics in the injection pulling region. The demonstrated injection-locked SAW oscillator could find applications in high-performance portable telecommunications and sensing systems.

physics.app-ph

Room-temperature mid-infrared detection using metasurface-absorber-integrated phononic crystal oscillator

Mid-infrared (MIR) detectors find extensive applications in chemical sensing, spectroscopy, communications, biomedical diagnosis and space explorations. Alternative to semiconductor MIR photodiodes and bolometers, mechanical-resonator-based MIR detectors show advantages in higher sensitivity and lower noise at room temperature, especially towards longer wavelength infrared. Here, we demonstrate uncooled room-temperature MIR detectors based on lithium niobate surface acoustic wave phononic crystal (PnC) resonators integrated with wavelength-and-polarization-selective metasurface absorber arrays. The detection is based on the resonant frequency shift induced by the local temperature change due to MIR absorptions. The PnC resonator is configured in an oscillating mode, enabling active readout and low frequency noise. Compared with detectors based on tethered thin-film mechanical resonators, our non-suspended, fully supported PnC resonators offer lower noise, faster thermal response, and robustness in both fabrication and practical applications. Our 1-GHz oscillator-based MIR detector shows a relative frequency deviation of $5.24 \times 10^{-10}$ Hz$^{-1/2}$ at an integration time of 50 ${\mu}$s, leading to an incident noise equivalent power of 197 pW/$\sqrt{\mathrm{Hz}}$ when input 6-${\mu}$m MIR light is modulated at 1.8 kHz, and a large dynamic range of 107 in incident MIR power. Our device architecture is compatible with the scalable manufacturing process and can be readily extended to a broader spectral range by tailoring the absorbing wavelengths of metasurface absorbers.

physics.optics

Optical multi-beam steering and communication using integrated acousto-optics arrays

Optical beam steering enables optical detection and imaging in macroscopic or microscopic scales and long-range communication over free space. It underpins numerous optical applications, including LiDAR, biomedical imaging, and remote sensing. Despite the inherent speed of light, advanced applications increasingly require the ability to steer multiple beams simultaneously to increase imaging throughput, boost communication bandwidth, and control arrays qubits for scalable quantum computing. Therefore, there is a significant demand for non-mechanical, integrated, and scalable multi-beam steering technology. Here, we report a scalable multi-beam steering system comprising an array of acousto-optic beam steering channels and photonic integrated circuits on a thin-film lithium niobate platform. Each channel generates tens of individually controllable beams of visible wavelength by exciting acoustic waves using digitally synthesized multi-tone microwave signals. We demonstrate the system's capabilities through multi-input, multi-output free-space communications, simultaneously transmitting to multiple receivers at megabits/sec data rates. This technology can be readily scaled up to steer hundreds of optical beams from a compact chip, potentially advancing many areas of optical technologies and enabling novel applications.

physics.optics

Low-phase-noise surface-acoustic-wave oscillator using an edge mode of a phononic band gap

Low-phase-noise microwave-frequency integrated oscillators provide compact solutions for various applications in signal processing, communications, and sensing. Surface acoustic waves (SAW), featuring orders-of-magnitude shorter wavelength than electromagnetic waves at the same frequency, enable integrated microwave-frequency systems with much smaller footprint on chip. SAW devices also allow higher quality (Q) factors than electronic components at room temperature. Here, we demonstrate a low-phase-noise gigahertz-frequency SAW oscillator on 128{\deg}Y-cut lithium niobate, where the SAW resonator occupies a footprint of 0.05 mm$^2$. Leveraging phononic crystal bandgap-edge modes to balance between Q factors and insertion losses, our 1-GHz SAW oscillator features a low phase noise of -132.5 dBc/Hz at a 10 kHz offset frequency and an overlapping Hadamard deviation of $6.5\times10^{-10}$ at an analysis time of 64 ms. The SAW resonator-based oscillator holds high potential in developing low-noise sensors and acousto-optic integrated circuits.

physics.app-ph

Frequency-domain Parallel Computing Using Single On-Chip Nonlinear Acoustic-wave Device

Multiply-accumulation (MAC) is a crucial computing operation in signal processing, numerical simulations, and machine learning. This work presents a scalable, programmable, frequency-domain parallel computing leveraging gigahertz (GHz)-frequency acoustic-wave nonlinearities. By encoding data in the frequency domain, a single nonlinear acoustic-wave device can perform a billion arithmetic operations simultaneously. A single device with a footprint of 0.03 mm$^2$ on lithium niobate (LN) achieves 0.0144 tera floating-point operations per second (TFLOPS), leading to a computing area density of 0.48 TFLOPS/mm$^2$ and a core power efficiency of 0.14 TFLOPS/Watt. As applications, we demonstrate multiplications of two 16-by-16 matrices and convolutional imaging processing of 128-by-128-pixel photos. Our technology could find versatile applications in near-sensor signal processing and edge computing.

physics.app-ph