Zidong Wu | Searcharxiv

arXiv2024

Near-Field Wideband Beam Training Based on Distance-Dependent Beam Split

Near-field beam training is essential for acquiring channel state information in 6G extremely large-scale multiple input multiple output (XL-MIMO) systems. To achieve low-overhead beam training, existing method has been proposed to leverage the near-field beam split effect, which deploys true-time-delay arrays to simultaneously search multiple angles of the entire angular range in a distance ring with a single pilot. However, the method still requires exhaustive search in the distance domain, which limits its efficiency. To address the problem, we propose a distance-dependent beam-split-based beam training method to further reduce the training overheads. Specifically, we first reveal the new phenomenon of distance-dependent beam split, where by manipulating the configurations of time-delay and phase-shift, beams at different frequencies can simultaneously scan the angular domain in multiple distance rings. Leveraging the phenomenon, we propose a near-field beam training method where both different angles and distances can simultaneously be searched in one time slot. Thus, a few pilots are capable of covering the whole angle-distance space for wideband XL-MIMO. Theoretical analysis and numerical simulations are also displayed to verify the superiority of the proposed method on beamforming gain and training overhead.

cs.IT↗

arXiv2023

Enabling More Users to Benefit from Near-Field Communications: From Linear to Circular Array

Massive multiple-input multiple-output (MIMO) for 5G is evolving into the extremely large-scale antenna array (ELAA) to increase the spectrum efficiency by orders of magnitude for 6G communications. ELAA introduces spherical-wave-based near-field communications, where channel capacity can be significantly improved for single-user and multi-user scenarios. Unfortunately, the near-field region at large incidence/emergence angles is greatly reduced with the widely studied uniform linear array (ULA). Thus, many randomly distributed users may fail to benefit from near-field communications. In this paper, we leverage the rotational symmetry of uniform circular array (UCA) to provide uniform and enlarged near-field regions at all angles, enabling more users to benefit from near-field communications. Specifically, by exploiting the geometrical relationship between UCA and users, the near-field beamforming technique for UCA is developed. Based on the analysis of near-field beamforming, we reveal that UCA is able to provide a larger near-field region than ULA in terms of the effective Rayleigh distance. Moreover, a concentric-ring codebook is designed to realize efficient codebook-based beamforming in the near-field region. In addition, we find out that UCA could generate orthogonal near-field beams along the same direction when the focal point of the near-field beam is exactly the zeros of other beams, which has the potential to further improve spectrum efficiency in multi-user communications compared with ULA. Simulation results are provided to verify the effectiveness of theoretical analysis and feasibility of UCA to enable more users to benefit from near-field communications by broadening the near-field region.

cs.IT↗

arXiv2023

Multiple access for near-field communications: SDMA or LDMA?

Spatial division multiple access (SDMA) is essential to improve the spectrum efficiency for multi-user multiple-input multiple-output (MIMO) communications. The classical SDMA for massive MIMO with hybrid precoding heavily relies on the angular orthogonality in the far field to distinguish multiple users at different angles, which fails to fully exploit spatial resources in the distance domain. With the dramatically increasing number of antennas, the extremely large-scale antenna array (ELAA) introduces additional resolution in the distance domain in the near field. In this paper, we propose the concept of location division multiple access (LDMA) to provide a new possibility to enhance spectrum efficiency compared with classical SDMA. The key idea is to exploit extra spatial resources in the distance domain to serve different users at different locations (determined by angles and distances) in the near field. Specifically, the asymptotic orthogonality of near-field beam focusing vectors in the distance domain is proved, which reveals that near-field beam focusing is able to focus signals on specific locations with limited leakage energy at other locations. This special property could be leveraged in hybrid precoding to mitigate inter-user interferences for spectrum efficiency enhancement. Moreover, we provide the spherical-domain codebook design method for LDMA communications with the uniform planar array, which provides the sampling method in the distance domain. Additionally, performance analysis of LDMA is provided to reveal that the asymptotic optimal spectrum efficiency could be achieved with the increasing number of antennas. Finally, simulation results verify the superiority of the proposed LDMA over SDMA in different scenarios.

eess.SP↗

arXiv2023

The Manifestation of Spatial Wideband Effect in Circular Array: From Beam Split to Beam Defocus

Millimeter-wave (mmWave) and terahertz (THz) communications with hybrid precoding architectures have been regarded as energy-efficient solutions to fulfill the vision of high-speed transmissions for 6G communications. Benefiting from the advantages of providing a wide scan range and flat array gain, the uniform circular array (UCA) has attracted much attention. However, the growing bandwidth of mmWave and THz communications require frequency-independent phase shifts, which can not be perfectly realized through frequency-independent phase shifters (PSs) in classical hybrid precoding architectures. This mismatch causes the beam defocus effect in UCA wideband communications, where the high-gain beams could not form at non-central frequencies. In this paper, we first investigate the characteristics of the beam defocus effect distinguishing itself from the beam split effect in uniform linear array (ULA) systems. The beam pattern of UCA in both frequency domain and angular domain is analyzed, characterizing the beamforming loss caused by the beam defocus effect. Then, the delay-phase-precoding (DPP) architecture which leverages the true-time-delay (TTD) devices to generate frequency-dependent phase shifts is employed to mitigate the beam defocus effect. Finally, performance analysis and extensive simulation results are provided to evaluate the effectiveness of the DPP architecture in UCA systems.

eess.SP↗

arXiv2023

Location Division Multiple Access for Near-Field Communications

Spatial division multiple access (SDMA) is essential to improve the spectrum efficiency for multi-user multiple-input multiple-output (MIMO) communications. The classical SDMA for massive MIMO with hybrid precoding heavily relies on the angular orthogonality in the far field to distinguish multiple users at different angles, which fails to fully exploit spatial resources in the distance domain. With dramatically increasing number of antennas, extremely large-scale antenna array (ELAA) introduces additional resolution in the distance domain in the near field. In this paper, we propose the concept of location division multiple access (LDMA) to provide a new possibility to enhance spectrum efficiency. The key idea is to exploit extra spatial resources in the distance domain to serve different users at different locations (determined by angles and distances) in the near field. Specifically, the asymptotic orthogonality of beam focusing vectors in the distance domain is proved, which reveals that near-field beam focusing is able to focus signals on specific locations to mitigate inter-user interferences. Simulation results verify the superiority of the proposed LDMA over classical SDMA in different scenarios.

eess.SP↗

arXiv2022

Near-Field Communications for 6G: Fundamentals, Challenges, Potentials, and Future Directions

Extremely large antenna array (ELAA) is a common feature of several key candidate technologies for sixth-generation mobile networks (6G), such as ultra-massive multiple-input-multiple-output (UM-MIMO), cell-free massive MIMO, reconfigurable intelligent surface (RIS), and terahertz communications. Since the number of antennas is very large for ELAA, the electromagnetic radiation field needs to be modeled by near-field spherical waves, which is opposed to the conventional planar-wave-based radiation model of 5G massive MIMO. As a result, near-field communications will become essential in 6G wireless networks. In this article, we systematically investigate the emerging near-field communication techniques. Firstly, we present the fundamentals of near-field communications and the metric to determine the near-field ranges in typical communication scenarios. Then, we investigate recent studies specific to near-field communications by classifying them into two categories, i.e., techniques addressing the challenges and those exploiting the potentials in near-field regions. Their principles, recent progress, pros and cons are discussed. More importantly, several open problems and future research directions for near-field communications are pointed out. We believe that this article would inspire more innovations for this important research topic of near-field communications for 6G.

cs.IT↗

arXiv2022

Demo: low-power communications based on RIS and AI for 6G

Ultra-massive multiple-input-multiple-output (UM-MIMO) is promising to meet the high rate requirements for future 6G. However, due to the large number of antennas and high path loss, the hardware power consumption and computing power consumption of UM-MIMO will be unaffordable. To address this problem, we implement a low-power communication system based on reconfigurable intelligent surface (RIS) and artificial intelligence (AI) for 6G. For hardware design, we employ a 256-element RIS at the base station to replace the traditional phased array. Moreover, a 2304-element RIS is developed as a relay to assist communication with much reduced transmit power. For software implementation, we develop an AI-based transmission design to reduce computing power consumption. By jointly designing the hardware and software, this prototype can realize real-time 4K video transmission with much reduced power consumption.

eess.SP↗

arXiv2022

Distance-Aware Precoding for Near-Field Capacity Improvement

Extremely large-scale MIMO (XL-MIMO) is a promising technology to improve the capacity for future 6G networks. With a very large number of antennas, the near-field property of XL-MIMO systems becomes dominant. Unlike the classical far-field line-of-sight (LoS) channel with only one available data stream, the significantly increased degrees of freedom (DoFs) are available in the near-field LoS channel. However, limited by the small number of radio frequency (RF) chains, the existing hybrid precoding architecture widely used for 5G is not able to fully exploit the extra DoFs in the near-field region. In this paper, the available DoFs and the capacity of the near-field LoS channel are theoretically analyzed at first. Then, to exploit the near-field effect as a new possibility for capacity improvement, the distance-aware precoding (DAP) scheme is proposed. We develop the DAP architecture, where a dedicated selection circuit is inserted to connect phase shifters and RF chains. Moreover, each RF chain can be flexibly configured to active or inactive according to the distance-related DoFs in the proposed DAP architecture. Based on the developed DAP architecture, a DAP algorithm is proposed to optimize the number of activated RF chains and precoding matrices to match the increased DoFs in the near-field region. Finally, simulation results verify that, the proposed DAP scheme can efficiently utilize the extra DoFs in the near-field region to improve the spectrum efficiency and the energy efficiency as well.

cs.IT↗