arXiv subjects

Zijun Xu

Publications and source records attributed to Zijun Xu.

28 records · Page 2Linked to original sources

arXiv2024

High precision proton beam monitor system concept design on CSNS based on SiC

A high precision beam monitor system based on silicon carbide PIN sensor is designed for China Spallation Neutron Source 1.6 GeV proton beam to monitor the proton beam fluence.The concept design of the beam monitor system is finished together with front-end electronics with silicon carbide PIN sensors, readout system and mechanical system.Several tests are performed to study the performance of each component of the system.The charge collection of the SiC PIN sensors after proton radiation is studied with 80 MeV proton beam for continuous running. Research on the performance of the front-end electronics and readout system is finished for better data acquisition.The uncertainty of proton beam fluence is below 1% in the beam monitor system.

physics.acc-ph↗

arXiv2023

Electric Field Measurement by Edge Transient Current Technique on Silicon Low Gain Avalanche Detector

A novel methodology, named the diffusion profile method, is proposed in this research to measure the electric field of a low gain avalanche detector (LGAD).The proposed methodology utilizes the maximum of the time derivative of the edge transient current technique (edge-TCT) test waveform to quantify the dispersion of the light-induced carriers. This method introduces the estimation of the elongation of the carrier cluster caused by diffusion and the divergence of the electric field force during its drift along the detector. The effectiveness of the diffusion profile method is demonstrated through the analysis of both simulated and measured edge-TCT waveforms. Experimental data was collected from a laser scan performed on an LGAD detector along its thickness direction.A simulation procedure has been developed in RASER (RAdiation SEmiconductoR) to generate signals from LGAD.An assumption of immediate one-step carrier multiplication is introduced to simplify the avalanche process.Simulation results were compared with transient current data at the waveform level and showed a favorable match. Both simulation and experimental results have shown that the diffusion profile method could be applied to certain edge-TCT facilities as an alternative of electric field measurement.

physics.ins-det↗

arXiv2023

Design and simulation of a novel 4H-SiC LGAD timing device

Silicon-based fast time detectors have been widely used in high energy physics, nuclear physics, space exploration and other fields in recent years. However, silicon detectors often require complex low-temperature systems when operating in irradiation environment, and their detection performance decrease with the increase of irradiation dose. Compared with silicon, silicon carbide (SiC) has a wider bandgap, higher atomic displacement energy, saturated electron drift velocity and thermal conductivity. Simultaneously, the low gain avalanche detector avoids crosstalk and high noise from high multiplication due to its moderate gain, and thus can maintain a high detector signal without increasing noise. Thus, the 4H-SiC particle detector, especially the low gain avalanche detector has the potential to detect the minimal ionized particles (MIPs) under extreme irradiation and high temperature environments. In this work, the emphasis was placed on the design of a 4H-SiC Low Gain Avalanche Detector (LGAD), especially the epitaxial structure and technical process which played the main roles. In addition, a simulation tool--RASER(RAdiation SEmiconductoR) was developed to simulate the performances including the electrical properties and time resolution of the 4H-SiC LGAD we proposed. The working voltage and gain effectiveness of the LGAD were verified by the simulation of electrical performances. The time resolution of the LGAD is (35.0 $\pm$ 0.2) ps under the electrical field of -800 V, which is better than that of the 4H-SiC PIN detector.

physics.ins-det↗

arXiv2023

Recent Progress and Next Steps for the MATHUSLA LLP Detector

We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by detailed simulation studies, and significant R&D has been performed on designing the scintillator detectors and understanding their performance. The collaboration is on track to complete a Technical Design Report, and there are many opportunities for interested new members to contribute towards the goal of designing and constructing MATHUSLA in time for HL-LHC collisions, which would increase the sensitivity to a large variety of highly motivated LLP signals by orders of magnitude.

hep-ex↗

arXiv2022

Charged Particle Tracking in Real-Time Using a Full-Mesh Data Delivery Architecture and Associative Memory Techniques

We present a flexible and scalable approach to address the challenges of charged particle track reconstruction in real-time event filters (Level-1 triggers) in collider physics experiments. The method described here is based on a full-mesh architecture for data distribution and relies on the Associative Memory approach to implement a pattern recognition algorithm that quickly identifies and organizes hits associated to trajectories of particles originating from particle collisions. We describe a successful implementation of a demonstration system composed of several innovative hardware and algorithmic elements. The implementation of a full-size system relies on the assumption that an Associative Memory device with the sufficient pattern density becomes available in the future, either through a dedicated ASIC or a modern FPGA. We demonstrate excellent performance in terms of track reconstruction efficiency, purity, momentum resolution, and processing time measured with data from a simulated LHC-like tracking detector.

hep-ex↗

arXiv2020

Sequential Sentence Matching Network for Multi-turn Response Selection in Retrieval-based Chatbots

Recently, open domain multi-turn chatbots have attracted much interest from lots of researchers in both academia and industry. The dominant retrieval-based methods use context-response matching mechanisms for multi-turn response selection. Specifically, the state-of-the-art methods perform the context-response matching by word or segment similarity. However, these models lack a full exploitation of the sentence-level semantic information, and make simple mistakes that humans can easily avoid. In this work, we propose a matching network, called sequential sentence matching network (S2M), to use the sentence-level semantic information to address the problem. Firstly and most importantly, we find that by using the sentence-level semantic information, the network successfully addresses the problem and gets a significant improvement on matching, resulting in a state-of-the-art performance. Furthermore, we integrate the sentence matching we introduced here and the usual word similarity matching reported in the current literature, to match at different semantic levels. Experiments on three public data sets show that such integration further improves the model performance.

cs.CL↗

arXiv2020

Tunable Casimir equilibria with phase change materials: from quantum trapping to its release

A stable suspension of nanoscale particles due to the Casimir force is of great interest for many applications such as sensing, non-contract nano-machines. However, the suspension properties are difficult to change once the devices are fabricated. Vanadium dioxide (VO$_2$) is a phase change material, which undergoes a transition from a low-temperature insulating phase to a high-temperature metallic phase around a temperature of 340 K. In this work, we study Casimir forces between a nanoplate (gold or Teflon) and a layered structure containing a VO$_2$ film. It is found that stable Casimir suspensions of nanoplates can be realized in a liquid environment, and the equilibrium distances are determined, not only by the layer thicknesses but also by the matter phases of VO$_2$. Under proper designs, a switch from quantum trapping of the gold nanoplate ("on" state) to its release ("off" state) as a result of the metal-to-insulator transition of VO$_2$, is revealed. On the other hand, the quantum trapping and release of a Teflon nanoplate is found under the insulator-to-metal transition of VO$_2 $. Our findings offer the possibility of designing switchable devices for applications in micro-and nano-electromechanical systems.

physics.app-ph↗

arXiv2014

ATCA-based ATLAS FTK input interface system

The first stage of the ATLAS Fast TracKer (FTK) is an ATCA-based input interface system, where hits from the entire silicon tracker are clustered and organized into overlapping eta-phi trigger towers before being sent to the tracking engines. First, FTK Input Mezzanine cards receive hit data and perform clustering to reduce data volume. Then, the ATCA-based Data Formatter system will organize the trigger tower data, sharing data among boards over full mesh backplanes and optic fibers. The board and system level design concepts and implementation details, as well as the operation experiences from the FTK full-chain testing, will be presented.

physics.ins-det↗

arXiv2013

Probing W+W-gamma Production and Anomalous Quartic Gauge Boson Couplings at the CERN LHC

Triple gauge boson associated production at the LHC serves as an interesting channel to test the robustness of the Standard Model. Any deviation from its SM prediction may indicate possible existence of relevant new physics, e.g., anomalous quartic gauge boson couplings. In this paper, a Monte-Carlo feasibility study of measuring WWA production with pure leptonic decays and probing anomalous quartic gauge-boson (e.g., WWAA) couplings, is presented in detail for the first time, with parton shower and detector simulation effects taken into account. Our results show that at the sqrt{s} = 14 TeV LHC with an integrated luminosity of 100 (30) fb-1, one can reach a significance of 9 (5) sigma to observe the SM WWA production, and can constrain at the 95% CL the anomalous WWAA coupling parameters, e.g., a_{0,c}^W/Λ^2 (see Ref.[15] for their definitions), at 10^{-5} GeV^{-2}, respectively.

hep-ph↗

arXiv2012

Probing New Physics via pp-> W+W- -> lvjj at the CERN LHC

TeV scale new Physics, e.g., Large Extra Dimensions or Models with anomalous triple vector boson couplings, can lead to excesses in various kinematic regions on the semi-leptonic productions of pp -> WW -> lvjj at the CERN LHC, which, although suffers from large QCD background compared with the pure leptonic channel, can benefit from larger production rates and the reconstructable 4-body mass Mlvjj. We study the search sensitivity through the lvjj channel at the 7TeV LHC on relevant new physics, via probing the hard tails on the reconstructed Mlvjj and the transverse momentum of W-boson (PTW), taking into account main backgrounds and including the parton shower and detector simulation effects. Our results show that with integrated luminosity of 5fb-1, the LHC can already discovery or exclude a large parameter region of the new physics, e.g., 95% CL. limit can be set on the Large Extra Dimensions with a cut-off scale up to 1.5 TeV, and the WWZ anomalous coupling down to, e.g. |λ_Z|~0.1. Brief results are also given for the 8TeV LHC.

hep-ph↗