arXiv subjects

Ziwen Huang

Publications and source records attributed to Ziwen Huang.

At least 19 recordsLinked to original sources

arXiv2026

Dynamically suppressing cavity dephasing induced by frequency fluctuations of a coupled nonlinear mode

High-coherence superconducting cavities offer a promising platform for quantum information, with long coherence times and negligible intrinsic dephasing. However, cavity control generally relies on nonlinear Josephson elements whose frequency fluctuations are inherited by the cavity as dephasing, potentially limiting control fidelities and eroding the noise bias used in error-correction protocols. Here, we introduce Stark-Assisted Flux-noise Evasion (SAFE), a hardware-efficient protocol that protects the cavity from inherited dephasing using only a weak off-resonant microwave drive applied to the nonlinear element. As a concrete setup, we analyze a 3D superconducting cavity dispersively coupled to a flux-tunable transmon (FTT) subject to $1/f$ flux noise. Analytical predictions are confirmed by Monte Carlo simulations with realistic parameters, which show that SAFE can extend the cavity dephasing time by more than an order of magnitude while keeping residual drive-induced decoherence subdominant.

quant-ph↗

arXiv2026

Systematic Construction of Time-Dependent Hamiltonians for Microwave-Driven Josephson Circuits

Time-dependent electromagnetic drives are fundamental for controlling complex quantum systems, including superconducting Josephson circuits. In these devices, accurate time-dependent Hamiltonian models are imperative for predicting their dynamics and designing high-fidelity quantum operations. Existing numerical methods, such as black-box quantization (BBQ) and energy-participation ratio (EPR), excel at modeling the static Hamiltonians of Josephson circuits. However, these techniques do not fully capture the behavior of driven circuits stimulated by external microwave drives, nor do they include a generalized approach to account for the inevitable noise and dissipation that enter through microwave ports. Here, we introduce numerical techniques that leverage classical microwave simulations, efficiently executable in finite-element solvers, to obtain the time-dependent Hamiltonian of microwave-driven superconducting circuits with arbitrary geometries under charge, flux, or mixed electromagnetic modulation. Importantly, our techniques do not rely on a lumped-element description of the superconducting circuit, in contrast to previous approaches to tackling this problem. We demonstrate the versatility of our approach by characterizing the driven properties of realistic circuit devices in complex electromagnetic environments, including coherent dynamics due to charge and flux modulation, as well as drive-induced relaxation and dephasing. Our techniques offer a powerful toolbox for optimizing circuit designs and advancing practical applications in superconducting quantum computing.

quant-ph↗

arXiv2026

Ultracoherent superconducting cavity-based multiqudit platform with error-resilient control

Realizing the promise of quantum computing requires simultaneously increasing Hilbert-space size and coherence times. While qubit-based architectures have long been the dominant paradigm, large local Hilbert spaces enable qudits, which offer more compact circuits and natural representations for quantum simulation in chemistry, condensed matter, and high-energy physics. Superconducting radio-frequency (SRF) cavities are attractive building blocks for qudit-based quantum technologies because of their exceptionally low dissipation and large bosonic Hilbert spaces, but turning them into programmable modules requires extra effort because the nonlinear circuitry required for control and measurement often introduces loss and noise that erode the memory advantage. Here we demonstrate a two-mode SRF cavity module weakly coupled to an ancillary transmon circuit and engineered to suppress controller-induced dissipation and dephasing, achieving single-photon lifetimes of 20.6 ms and 15.6 ms and a dephasing time exceeding 40 ms. Using sideband interactions together with error-resilient protocols incorporating measurement-based correction and post-selection, we prepare Fock states up to $N=20$ with fidelities exceeding 95% and generate two-mode entanglement near the coherence limit, approaching 99.9%. By combining ultracoherent storage with high-fidelity control, this work moves cavity-based hardware beyond memory-only operation and establishes a practical route toward high-dimensional encodings and scalable modular quantum information processing.

quant-ph↗

arXiv2026

Atomic Task Graph: A Unified Framework for Agentic Planning and Execution

LLM-based agents have shown strong potential for solving complex multi-step tasks, yet existing performance improvements often rely on either scaling to larger backbone models or task-specific fine-tuning. The former incurs substantial computational costs, while the latter typically generalizes poorly across different tasks. Although prompt-based control is training-free and broadly applicable, existing methods still leave input-output dependencies between subtasks implicit in textual trajectories, making verified intermediate results difficult to reuse. To address these limitations, we propose Atomic Task Graph (ATG), a unified control framework for planning and execution. Specifically, ATG maintains an explicit graph to expose dependencies and support reuse. During planning, it recursively decomposes a high-level task into subtasks, forming a sequence of directed acyclic graphs (DAGs) whose evolution can be traced. During execution, the dependencies exposed by ATG allow independent branches to be executed in parallel, thereby improving execution efficiency. When failures are detected, ATG leverages the graph evolution history to localize the error source and repair only the affected region, preserving validated regions unchanged. Experiments show that ATG consistently outperforms strong baselines in success rate and execution efficiency across three interactive benchmarks using only 7B-8B backbones.

cs.AI↗

arXiv2026

Fast, High-Fidelity Erasure Detection of Dual-Rail Qubits with Symmetrically Coupled Readout

Erasure qubits are a promising platform for implementing hardware-efficient quantum error correction. Realizing the error-correction advantages of this encoding requires frequent mid-circuit erasure checks that are fast, high-fidelity, and scalable. Here, we realize erasure detection with a hardware-efficient circuit consisting of a single readout resonator dispersively and symmetrically coupled to both transmons of a dual-rail qubit. We use this circuit to demonstrate single-shot erasure detection in 384 ns with minimal impact on the dual-rail logical manifold, achieving a residual error per check of $6.0(2) \times 10^{-4}$, with only $8(3) \times 10^{-5}$ induced dephasing per check, and an erasure error per check of $2.54(1)\times 10^{-2}$. The high degree of matched dispersive readout coupling ($χ$-matching) within the dual-rail qubit code space also allows us to realize a new modality: time-continuous erasure detection performed in parallel with single-qubit gates. Here we achieve a median $7.2 \times 10^{-5}$ error per gate with $< 1 \times 10^{-5}$ error induced by erasure detection. This demonstrates a reduction in erasure detection overhead as well as a crucial ingredient for soft information quantum error correction. Together, these results establish symmetrically coupled dispersive readout as a fast, hardware-efficient, and scalable component for erasure-based quantum error correction using transmon dual-rail qubits.

quant-ph↗

arXiv2026

Readout-induced degradation of transmon lifetimes: interplay of TLSs and qubit spectral reshaping

Measurement backaction degrades dispersive readout of superconducting qubits even at modest drive strengths, often via the reduction of qubit lifetimes during readout. In this work, we theoretically and experimentally study this degradation and show how it can result from the interplay between detuned two-level systems (TLSs) and a drive-renormalized qubit spectrum. For modest to strong readout, the qubit emission spectrum becomes non-Lorentzian and depends sensitively on the readout drive frequency (even when measurement rate is fixed). We combine the readout-modified qubit emission spectrum with time-dependent perturbation theory to predict qubit lifetimes in the presence of a TLS bath. Master equation simulations and experimental measurements on a frequency-tunable transmon confirm these predictions quantitatively. In particular, we find that driving at the resonator frequency associated with the qubit ground state yields the narrowest qubit emission spectrum and the least lifetime degradation for a fixed measurement rate, providing a practical guideline for optimizing readout protocols in future quantum processors.

quant-ph↗

arXiv2026

High-resolution observations of small-scale activity in coronal hole plumes

Plumes have been proposed to channel MHD waves and the solar wind into the heliosphere. High-speed propagating disturbances (PDs), though well detected in plumes, cannot yet be clearly assigned to MHD waves or to mass flows. Additionally, plume bases as observed in the extreme ultraviolet are riddled with small-scale transients that could be related to the PDs. We study three plumes within an equatorial coronal hole observed by the EUV High Resolution Imager of the Extreme Ultraviolet Imager on board Solar Orbiter. The properties of the small-scale brightenings at the plume bases are investigated to interpret their nature and possible relation with PDs. We process images with the Difference of Gaussians method to highlight the target brightenings, which are further identified with two different approaches. In the 30-min observation, 50 brightenings are visually selected, which also help set thresholds for automatic detection, where we find 451 brightenings. Their properties, including velocities on the plane of sky (PoS), are analyzed statistically. Potential field extrapolation based on the magnetic field data from the Polarimetric and Helioseismic Imager on board Solar Orbiter is used for correcting the PoS velocity to the real velocity along the magnetic field. We observe that the majority of the base brightenings are small-scale, short-lived, and slightly elongated at the plume bases. They display intricate movements, with most exhibiting velocities in the PoS of less than 10 km/s. Their 3-dimensional velocities are found to be substantially lower than (and difficult to reconcile with) the speeds of PDs. A direct link between base brightenings and PDs remains inconclusive. We propose two possibilities for base brightenings: they may be related to wave-driven Type I spicules or originate from interchange reconnections. Further investigation is required to validate these hypotheses.

astro-ph.SR↗

arXiv2025

Quasi-1D Electronic Metadevices with Enhanced Electrical Properties

Electronic metadevices leveraging sub-wavelength metallic features have shown great potential for high-frequency switching. Theoretical analysis based on a one-dimensional (1D) model indicates that reducing the size of subwavelength features can enhance electrical properties, such as contact resistance and switching cutoff frequency. Here, we report higher-than-expected contact resistance in electronic metadevices when the subwavelength feature size is aggressively downscaled. We attribute this effect to transverse currents in the two-dimensional electron gas (2DEG) running parallel to the stripe width. We present the first experimental demonstration of a metadevice governed by a one-dimensional model, which we refer to as a quasi-1D electronic metadevice and show that it enables enhanced electrical performance. Our findings pave the way to design next generation electronic metadevice switches with applications in future telecommunication circuits.

cond-mat.mes-hall↗

arXiv2024

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes.

quant-ph↗

arXiv2023

Fast ZZ-Free Entangling Gates for Superconducting Qubits Assisted by a Driven Resonator

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancellation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase (RIP) interaction, the static ZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance CNOT gates within 40 ns and adiabatic CZ gates within 140 ns. Our architecture is not only ZZ free but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance CNOT gate can be reduced to below 1e-4.

quant-ph↗

arXiv2023

Completely Positive Map for Noisy Driven Quantum Systems Derived by Keldysh Expansion

Accurate modeling of decoherence errors in quantum processors is crucial for analyzing and improving gate fidelities. To increase the accuracy beyond that of the Lindblad dynamical map, several generalizations have been proposed, and the exploration of simpler and more systematic frameworks is still ongoing. In this paper, we introduce a decoherence model based on the Keldysh formalism. This formalism allows us to include non-periodic drives and correlated quantum noise in our model. In addition to its wide range of applications, our method is also numerically simple, and yields a CPTP map. These features allow us to integrate the Keldysh map with quantum-optimal-control techniques. We demonstrate that this strategy generates pulses that mitigate correlated quantum noise in qubit state-transfer and gate operations.

quant-ph↗

arXiv2023

Tunable inductive coupler for high fidelity gates between fluxonium qubits

The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with $\sim50$MHz frequencies and $\sim5$ GHz anharmonicities. The coupler enables the qubits to have a large tuning range of $\textit{XX}$ coupling strengths ($-35$ to $75$ MHz). The $\textit{ZZ}$ coupling strength is $<3$kHz across the entire coupler bias range, and $<100$Hz at the coupler off-position. These qualities lead to fast, high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a $\sqrt{i\mathrm{SWAP}}$ gate in $258$ns with fidelity $99.72\%$, and by driving at the sum frequency of the two qubits, we achieve a $\sqrt{b\mathrm{SWAP}}$ gate in $102$ns with fidelity $99.91\%$. This latter gate is only 5 qubit Larmor periods in length. We run cross-entropy benchmarking for over $20$ consecutive hours and measure stable gate fidelities, with $\sqrt{b\mathrm{SWAP}}$ drift ($2 σ$) $< 0.02\%$ and $\sqrt{i\mathrm{SWAP}}$ drift $< 0.08\%$.

quant-ph↗

arXiv2023

Imaging and spectroscopic observations of extreme-ultraviolet brightenings using EUI and SPICE on board Solar Orbiter

The smallest extreme-ultraviolet (EUV) brightening events that were detected so far, called campfires, have recently been uncovered by the High Resolution EUV telescope (HRIEUV), which is part of the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter. HRIEUV has a broad bandpass centered at 17.4 nm that is dominated by Fe ix and Fe x emission at about 1 MK. We study the thermal properties of EUI brightening events by simultaneously observing their responses at different wavelengths using spectral data from the Spectral Imaging of the Coronal Environment (SPICE) also on board Solar Orbiter and imaging data from EUI. We studied three EUI brightenings that were identified in HRIEUV data that lie within the small areas covered by the slit of the SPICE EUV spectrometer. We obtained the line intensities of the spectral profiles by Gaussian fitting. These diagnostics were used to study the evolution of the EUI brightenings over time at the different line-formation temperatures. We find that (i) the detection of these EUI brightenings is at the limit of the SPICE capabilities. They could not have been independently identified in the data without the aid of HRIEUV observations. (ii) Two of these EUI brightenings with longer lifetimes are observed up to Ne viii temperatures (0.6 MK). (iii) All of the events are detectable in O vi (0.3 MK), and the two longer-lived events are also detected in other transition region (TR) lines. (iv) In one case, we observe two peaks in the intensity light curve of the TR lines that are separated by 2.7 min for C iii and 1.2 min for O vi. The Ne viii intensity shows a single peak between the two peak times of the TR line intensity. Spectral data from SPICE allow us to follow the thermal properties of EUI brightenings. Our results indicate that at least some EUI brightenings barely reach coronal temperatures.

astro-ph.SR↗

arXiv2022

Stabilizing and improving qubit coherence by engineering noise spectrum of two-level systems

Superconducting circuits are a leading platform for quantum computing. However, their coherence times are still limited and exhibit temporal fluctuations. Those phenomena are often attributed to the coupling between qubits and material defects that can be well described as an ensemble of two-level systems (TLSs). Among them, charge fluctuators inside amorphous oxide layers contribute to both low-frequency $1/f$ charge noise and high-frequency dielectric loss, causing fast qubit dephasing and relaxation. Moreover, spectral diffusion from mutual TLS interactions varies the noise amplitude over time, fluctuating the qubit lifetime. Here, we propose to mitigate those harmful effects by engineering the relevant TLS noise spectral densities. Specifically, our protocols smooth the high-frequency noise spectrum and suppress the low-frequency noise amplitude via depolarizing and dephasing the TLSs, respectively. As a result, we predict a drastic stabilization in qubit lifetime and an increase in qubit pure dephasing time. Our detailed analysis of feasible experimental implementations shows that the improvement is not compromised by spurious coupling from the applied noise to the qubit.

quant-ph↗

arXiv2022

Experimental verification of the treatment of time-dependent flux in circuit quantization

Recent theoretical work has highlighted that quantizing a superconducting circuit in the presence of time-dependent flux $Φ(t)$ generally produces Hamiltonian terms proportional to $dΦ/dt$ unless a special allocation of the flux across inductive terms is chosen. Here, we present an experiment probing the effects of a fast flux ramp applied to a heavy-fluxonium circuit. The experiment confirms that naïve omission of the $dΦ/dt$ term leads to theoretical predictions inconsistent with experimental data. Experimental data are fully consistent with recent theory that includes the derivative term or equivalently uses "irrotational variables" that uniquely allocate the flux to properly eliminate the $dΦ/dt$ term.

quant-ph↗

arXiv2022

Computer-aided quantization and numerical analysis of superconducting circuits

The development of new superconducting circuits and the improvement of existing ones rely on the accurate modeling of spectral properties which are key to achieving the needed advances in qubit performance. Systematic circuit analysis at the lumped-element level, starting from a circuit network and culminating in a Hamiltonian appropriately describing the quantum properties of the circuit, is a well-established procedure, yet cumbersome to carry out manually for larger circuits. We present work utilizing symbolic computer algebra and numerical diagonalization routines versatile enough to tackle a variety of circuits. Results from this work are accessible through a newly released module of the scqubits package.

quant-ph↗

arXiv2022

High-Order Qubit Dephasing at Sweet Spots by Non-Gaussian Fluctuators: Symmetry Breaking and Floquet Protection

Although the Gaussian-noise assumption is widely adopted in the study of qubit decoherence, non-Gaussian noise sources, especially the strong discrete fluctuators, have been detected in many qubits. It remains an important task to further understand and mitigate the distinctive decoherence effect of the non-Gaussian noise. Here, we study the qubit dephasing caused by the non-Gaussian fluctuators, and predict a symmetry-breaking effect that is unique to the non-Gaussian noise. This broken symmetry results in an experimentally measurable mismatch between the extremum points of the dephasing rate and qubit frequency, which demands extra carefulness in characterizing the noise and locating the optimal working point. To further enhance the coherence time at the sweet spot, we propose to suppress the second-order derivative of the qubit frequency by the Floquet engineering. Our simulation with a heavy fluxonium shows an order of magnitude improvement of the dephasing time, even after including the noise introduced by the drive.

quant-ph↗

arXiv2022

Quantum computing hardware for HEP algorithms and sensing

Quantum information science harnesses the principles of quantum mechanics to realize computational algorithms with complexities vastly intractable by current computer platforms. Typical applications range from quantum chemistry to optimization problems and also include simulations for high energy physics. The recent maturing of quantum hardware has triggered preliminary explorations by several institutions (including Fermilab) of quantum hardware capable of demonstrating quantum advantage in multiple domains, from quantum computing to communications, to sensing. The Superconducting Quantum Materials and Systems (SQMS) Center, led by Fermilab, is dedicated to providing breakthroughs in quantum computing and sensing, mediating quantum engineering and HEP based material science. The main goal of the Center is to deploy quantum systems with superior performance tailored to the algorithms used in high energy physics. In this Snowmass paper, we discuss the two most promising superconducting quantum architectures for HEP algorithms, i.e. three-level systems (qutrits) supported by transmon devices coupled to planar devices and multi-level systems (qudits with arbitrary N energy levels) supported by superconducting 3D cavities. For each architecture, we demonstrate exemplary HEP algorithms and identify the current challenges, ongoing work and future opportunities. Furthermore, we discuss the prospects and complexities of interconnecting the different architectures and individual computational nodes. Finally, we review several different strategies of error protection and correction and discuss their potential to improve the performance of the two architectures. This whitepaper seeks to reach out to the HEP community and drive progress in both HEP research and QIS hardware.

quant-ph↗