arXiv subjects

Ziyuan Zheng

Publications and source records attributed to Ziyuan Zheng.

At least 19 recordsLinked to original sources

arXiv2026

Joint Beamforming and Position Optimization for IRS-Aided SWIPT with Movable Antennas

Simultaneous wireless information and power transfer (SWIPT) has been envisioned as a promising technology to support ubiquitous connectivity and reliable sustainability in Internet-of-Things (IoT) networks, which, however, generally suffers from severe attenuation caused by long distance propagation, leading to inefficient wireless power transfer (WPT) for energy harvesting receivers (EHRs). This paper proposes to introduce emerging intelligent reflecting surface (IRS) and movable antenna (MA) technologies into SWIPT systems aiming at enhancing information transmission for information decoding receivers (IDRs) and improving receive power of EHRs. We consider to maximize the weighted sum-rate of IDRs via jointly optimizing the active and passive beamforming at the base station (BS) and IRS, respectively, as well as the positions of MAs, while guaranteeing the requirements of all EHRs. To tackle this challenging task due to the non-convexity of associated optimization, we develop an efficient algorithm combining weighted minimal mean square error (WMMSE), block coordinate descent (BCD), majorization-minimization (MM), and penalty duality decomposition (PDD) frameworks. Besides, we present a feasibility characterization method to examine the achievability of EHRs' requirements. Simulation results demonstrate the significant benefits of our proposed solutions. Particularly, the optimized IRS configuration may exhibit higher performance gain than MA counterpart under our considered scenario.

cs.IT↗

arXiv2026

Wireless Communication with Cross-Linked Rotatable Antenna Array: Architecture Design and Rotation Optimization

Rotatable antenna (RA) technology can harness additional spatial degrees of freedom by enabling the dynamic three-dimensional orientation control of each antenna. Unfortunately, the hardware cost and control complexity of traditional RA systems is proportional to the number of RAs. To address the issue, we consider a cross-linked (CL) RA structure, which enables the coordinated rotation of multiple antennas, thereby offering a cost-effective solution. To evaluate the performance of the CL-RA array, we investigate a CL-RA-aided uplink system. Specifically, we first establish system models for both antenna element-level and antenna panel-level rotation. Then, we formulate a sum rate maximization problem by jointly optimizing the receive beamforming at the base station and the rotation angles. For the antenna element-level rotation, we derive the optimal solution of the CL-RA array under the single-user case. Subsequently, for two rotation schemes, we propose an alternating optimization algorithm to solve the formulated problem in the multi-user case, where the receive beamforming and the antenna rotation angles are obtained by applying the minimum mean square error method and feasible direction method, respectively. In addition, considering the hardware limitations, we apply the genetic algorithm to address the discrete rotation angles selection problem. Simulation results show that by carefully designing the row-column partition scheme, the performance of the CL-RA architecture is quite close to that of the flexible antenna orientation scheme. Moreover, the CL antenna element-level scheme surpasses the CL antenna panel-level scheme by 25% and delivers a 128% performance improvement over conventional fixed-direction antennas.

cs.IT↗

arXiv2026

Joint Transmit and Receive Antenna Orientation Design for Secure MIMO Communications

Physical layer security (PLS) is a promising paradigm for safeguarding 6G wireless networks by exploiting the inherent characteristics of wireless channels. However, the efficiency of conventional PLS is often limited by fixed orientation antennas. This paper investigates a rotatable antenna (RA)-aided secure multiple-input multiple-output (MIMO) communication system, where both the transmitter and the receiver are equipped with RAs in the presence of an eavesdropper. By dynamically optimizing the orientations of RAs, we can proactively reshape the effective MIMO channels to enhance legitimate transmission while simultaneously suppressing information leakage to the eavesdropper. We formulate a secrecy rate maximization problem by jointly optimizing the transmit beamforming, artificial noise (AN) covariance matrix, and the transmit/receive RA orientations, subject to the transmit power budget and antenna orientation constraints. To tackle the resulting highly coupled and non-convex problem, we first study a simplified single-input single-output (SISO) case to reveal the structure of the optimal RA orientation. For the general MIMO case, we develop an alternating optimization algorithm by reformulating the original problem through the minimum mean-square error framework. In particular, the transmit beamforming and AN covariance matrix are derived in semi-closed forms, while the RA orientations are updated via the Riemannian Frank-Wolfe method. The proposed design is further extended to the multi-receiver secure transmission scenario. Simulation results show that the proposed scheme converges rapidly and achieves significant secrecy rate gains over the conventional fixed-orientation scheme.

cs.IT↗

arXiv2026

Beyond Beamforming: Phase-and-Gain Channel Shaping via Rotatable Antenna Arrays

This paper investigates geometry-reconfigurable transmission for multiuser communication systems enabled by a rotatable antenna array. In contrast to conventional fixed arrays, the proposed architecture jointly exploits array pose adjustment and element-level boresight steering, thereby reshaping both the array-induced phase responses and the direction-dependent channel gains. We formulate a weighted sum-rate maximization problem that jointly optimizes the transmit beamformers, array pose, and element boresights under practical visibility and steering constraints. To reveal the underlying design principles, we first provide a geometric interpretation via zero-forcing analysis, showing that the resulting rates stem from both channel-strength enhancement and spatial-separability improvement. Specifically, array-pose rotation improves inter-user channel orthogonality even with isotropic elements, whereas directional elements introduce a tradeoff between phase-based spatial separation and boresight-dependent gain alignment. Motivated by these insights, we develop an efficient optimization framework that jointly coordinates transmit beamforming, array-pose adaptation, and element-boresight steering to exploit the geometry-induced phase-and-gain channel-shaping capability. Simulation results demonstrate that the proposed joint design outperforms fixed-array, pose-only, and boresight-only benchmarks, with larger gains achieved under more directive element patterns and tighter boresight-steering constraints.

eess.SP↗

arXiv2026

Multi-User MIMO with Rotatable Antennas and IRS: Joint Antenna Boresight and IRS Orientation Design

In this paper, we investigate an intelligent reflecting surface (IRS)-assisted multi-user system, where the base station (BS) employs rotatable antennas (RAs) and the IRS can adjust the panel orientation.To alleviate the severe multiplicative path loss of the cascaded channel, the IRS is deployed near the BS, while the user-BS and user-IRS links remain in the far field. We formulate a sum-rate maximization problem by jointly optimizing the receive beamforming, IRS phase shifts, BS antenna boresights, and IRS panel orientation. To tackle the resulting highly coupled and non-convex problem, we first study a single-user case to reveal the structure of the dual-rotation gain, which is shown to be multiplicatively separable in the far field but coupled in the near field. For the general multi-user case, we develop an alternating optimization algorithm, where the receive beamforming is updated in closed form, the IRS phase shifts are optimized by an FP-assisted Riemannian conjugate gradient method, and the BS antenna boresights and IRS panel orientation are updated via projected gradient methods. Simulation results demonstrate the significant sum-rate gains achieved by the proposed coordinated rotation design over fixed-orientation and single-rotation benchmark schemes, and provide useful insights into near-field dual-rotation design.

cs.IT↗

arXiv2026

Two-Timescale Design for Rotatable-Antenna Systems With Imperfect CSI: Rate Analysis and Orientation Optimization

This paper studies uplink multiuser MIMO with a rotatable antenna (RA) array under imperfect channel state information (CSI), where each base-station antenna can adjust its boresight direction within an angular region. To balance performance and control overhead, we propose a two-timescale design: RA orientations are optimized from statistical CSI on a large timescale, while linear receive combiners are updated per coherence block from linear minimum-mean-squared-error (LMMSE) channel estimates. Under this framework, we derive a closed-form use-and-then-forget (UatF)-based rate expression for maximum-ratio combining (MRC) and a closed-form statistical rate surrogate for weighted zero-forcing (wZF) under imperfect CSI, revealing how RA rotation influences useful signal strength, estimation-error-induced self-interference, and multiuser interference. The analysis shows that the orientation minimizing channel-estimation error differs from the rate-maximizing one, and that MRC and wZF prefer different rotation configurations due to their distinct mechanisms of signal aggregation and error-aware user separation. For the resulting non-convex rotation design problems, we develop a projected-gradient algorithm over a product of spherical caps with explicit derivatives of the required channel statistics and rate metrics. Numerical results verify the accuracy of the large-timescale surrogates and show substantial performance gains from RA optimization.

eess.SP↗

arXiv2026

Cell-Free MIMO with Rotatable Antennas: When Macro-Diversity Meets Antenna Directivity

Cell-free networks leverage distributed access points (APs) to achieve macro-diversity, yet their performance is often constrained by large disparities in channel quality arising from user geometry and blockages. To address this, rotatable antennas (RAs) add a lightweight hardware degree of freedom by steering the antenna boresight toward dominant propagation directions to strengthen unfavorable links, thereby enabling the network to better exploit macro-diversity for higher and more uniform performance. This paper investigates an RA-enabled cell-free downlink network and formulates a max-min rate problem that jointly optimizes transmit beamforming and antenna orientations. To tackle this challenging problem, we develop an alternating-optimization-based algorithm that iteratively updates the beamformers via a second-order cone program (SOCP) and optimizes the antenna orientations using successive convex approximation. To reduce complexity, we further propose an efficient two-stage scheme that first designs orientations by maximizing a proportional-fair log-utility using manifold-aware Frank-Wolfe updates, and then computes the beamformers using an SOCP-based design. Simulation results demonstrate that the proposed orientation-aware designs achieve a substantially higher worst-user rate than conventional beamforming-only benchmarks. Furthermore, larger antenna directivity enhances fairness with proper orientation but can degrade the worst-user performance otherwise.

eess.SP↗

arXiv2026

Low-Altitude ISAC with Rotatable Active and Passive Arrays

This paper investigates a low-altitude integrated sensing and communication (ISAC) system that leverages cooperative rotatable active and passive arrays. We consider a downlink scenario where a base station (BS) with an active rotatable array serves multiple communication users and senses low-altitude targets, assisted by a rotatable reconfigurable intelligent surface (RIS). A rotation-aware geometry-based multipath model is developed to capture the impact of three-dimensional (3D) array orientations on both steering vectors and direction-dependent element gains. On this basis, we formulate a new optimization problem that maximizes the downlink sum rate subject to a transmit power budget, RIS unit-modulus constraints, mechanical rotation limits, and a sensing beampattern mean-squared-error (MSE) constraint. To address the resulting highly non-convex problem, we propose a penalty-based alternating-optimization (AO) framework that alternately updates the BS precoder, RIS phase shifts, and BS/RIS array rotation angles. The three blocks are efficiently handled via a convex optimization method based on quadratic-transform (QT) and majorization-minorization (MM), Riemannian conjugate gradient (RCG) on the unit-modulus manifold, and projected gradient descent (PGD) with Barzilai-Borwein step sizes, respectively. Numerical results in low-altitude geometries demonstrate that the proposed jointly rotatable BS-RIS architecture achieves significant sum-rate gains over fixed or partially rotatable baselines while guaranteeing sensing requirements, especially with directional antennas and in interference-limited regimes.

eess.SP↗

arXiv2026

Low-Altitude Reflection via UAV-Mounted Rotatable IRS

Low-altitude network is a key enabler for extending coverage and recovering connectivity in 6G systems, especially when terrestrial infrastructure is unavailable. This paper studies a uncrewed aerial vehicle (UAV)-mounted rotatable intelligent reflecting surface (IRS) as a low-altitude reflector between a blocked base station (BS) and a ground terminal (GT). Unlike the conventional isotropic-element assumption, each IRS element is modeled with a hemispherical directive radiation pattern, whose boresight can be adjusted via element rotations. We formulate a new optimization problem that jointly designs IRS phase shifts, per-element rotation vectors, and UAV placement to maximize the received signal-to-noise ratio (SNR). Leveraging the problem structure, we derive closed-form solutions for phase alignment and element rotations, showing that the optimal boresight points are along the internal angular bisector between the BS-IRS and GT-IRS directions. With these closed forms, the design reduces to a placement optimization problem over a box-constrained airspace; we solve it using an efficient projected gradient algorithm with majorization-minimization update and a global Lipschitz constant. Numerical results demonstrate substantial SNR gains from directive elements and reveal a fundamental trade-off between directional gain and path loss, yielding useful insights into low-altitude deployment of UAV-mounted IRSs.

eess.SP↗

arXiv2026

Joint Antenna Rotation and IRS Beamforming for Multi-User Uplink Communications

Rotatable antenna (RA) enhances wireless coverage through directional gain steering, yet suffers from performance degradation under physical blockages. Intelligent reflecting surface (IRS) establishes reflective paths to bypass obstacles, but suffers from angular mismatch when deployed in the side-lobe region of base station (BS) antennas. To address this issue, we propose a new RA-enabled IRS-assisted multi-user uplink system, in which the BS antennas are capable of flexibly adjusting their 3D orientations to align their boresights with the IRS. We formulate a sum rate maximization problem by jointly optimizing the antenna 3D rotations, receive beamforming and IRS phase shifts. To tackle this non-convex problem, we propose an efficient alternating optimization (AO) algorithm. Specifically, we iteratively update the antenna rotations via projected gradient ascent (PGA), compute the receive beamforming via a closed-form solution, and optimize the IRS phase shifts via fractional programming (FP). Numerical results demonstrate that the proposed system yields significant performance gains over conventional fixed-antenna systems, especially under large angular misalignments.

cs.IT↗

arXiv2026

Two-Scale Spatial Deployment for Cost-Effective Wireless Networks via Cooperative IRSs and Movable Antennas

This paper proposes a two-scale spatial deployment strategy to ensure reliable coverage for multiple target areas, integrating macroscopic intelligent reflecting surfaces (IRSs) and fine-grained movable antennas (MAs). Specifically, IRSs are selectively deployed from candidate sites to shape the propagation geometry, while MAs are locally repositioned among discretized locations to exploit small-scale channel variations. The objective is to minimize the total deployment cost of MAs and IRSs by jointly optimizing the IRS site selection, MA positions, transmit precoding, and IRS phase shifts, subject to the signal-to-noise ratio (SNR) requirements for all target areas. This leads to a challenging mixed-integer non-convex optimization problem that is intractable to solve directly. To address this, we first formulate an auxiliary problem to verify the feasibility. A penalty-based double-loop algorithm integrating alternating optimization and successive convex approximation (SCA) is developed to solve this feasibility issue, which is subsequently adapted to obtain a suboptimal solution for the original cost minimization problem. Finally, based on the obtained solution, we formulate an element refinement problem to further reduce the deployment cost, which is solved by a penalty-based SCA algorithm. Simulation results demonstrate that the proposed designs consistently outperform benchmarks relying on independent area planning or full IRS deployment in terms of cost-efficiency. Moreover, for cost minimization, MA architectures are preferable in large placement apertures, whereas fully populated FPA architectures excel in compact ones; for worst-case SNR maximization, MA architectures exhibit a lower cost threshold for feasibility, while FPA architectures can attain peak SNR at a lower total cost.

eess.SP↗

arXiv2026

Two-Timescale Design for Movable Antenna-Enabled Multiuser MIMO Systems

Movable antennas (MAs), which can be swiftly repositioned within a defined region, offer a promising solution to the limitations of fixed-position antennas (FPAs) in adapting to spatial variations in wireless channels, thereby improving channel conditions and communication between transceivers. However, frequent MA position adjustments based on instantaneous channel state information (CSI) incur high operational complexity, making real-time CSI acquisition impractical, especially in fast-fading channels. To address these challenges, we propose a two-timescale transmission framework for MA-enabled multiuser multiple-input-multiple-output (MU-MIMO) systems. In the large timescale, statistical CSI is exploited to optimize MA positions for long-term ergodic performance, whereas, in the small timescale, beamforming vectors are designed using instantaneous CSI to handle short-term channel fluctuations. Within this new framework, we analyze the ergodic sum rate and develop efficient MA position optimization algorithms for both maximum-ratio-transmission (MRT) and zero-forcing (ZF) beamforming schemes. These algorithms employ alternating optimization (AO), successive convex approximation (SCA), and majorization-minimization (MM) techniques, iteratively optimizing antenna positions and refining surrogate functions that approximate the ergodic sum rate. Numerical results show significant ergodic sum rate gains with the proposed two-timescale MA design over conventional FPA systems, particularly under moderate to strong line-of-sight (LoS) conditions. Notably, MA with ZF beamforming consistently outperforms MA with MRT, highlighting the synergy between beamforming and MAs for superior interference management in environments with moderate Rician factors and high user density, while MA with MRT can offer a simplified alternative to complex beamforming designs in strong LoS conditions.

eess.SP↗

arXiv2026

Integrating Movable Antennas and Intelligent Reflecting Surfaces (MA-IRS): Fundamentals, Practical Solutions, and ISAC

Movable antennas (MAs) and intelligent reflecting surfaces (IRSs) enable active antenna repositioning and passive phase-shift tuning for channel reconfiguration, respectively. Integrating MAs and IRSs boosts spatial degrees of freedom, significantly enhancing wireless network capacity, coverage, and reliability. In this article, we first present the fundamentals of MA-IRS integration, involving clarifying the key design issues, revealing performance gain, and identifying the conditions where MA-IRS synergy persists. Then, we examine practical challenges and propose pragmatic design solutions, including optimization schemes, hardware architectures, deployment strategies, and robust designs for hardware impairments and mobility management. In addition, we highlight how MA-IRS architectures uniquely support advanced integrated sensing and communication, enhancing sensing performance and dual-functional flexibility. Overall, MA-IRS integration emerges as a compelling approach toward next-generation reconfigurable wireless systems.

eess.SP↗

arXiv2025

Reconfigurable Intelligent Surface-Enhanced Satellite Networks: Deployment Strategies, Key Capabilities, Practical Solutions, and Future Directions

Satellite networks promise wide-area 6G coverage but face two persistent barriers: blockage-induced service discontinuities and increasingly stringent spectrum coexistence across satellite layers and with terrestrial systems. Reconfigurable intelligent surfaces (RISs) act as low-power programmable apertures that redirect energy without the cost and power consumption of fully active arrays. We develop a deployment-first, operations-aware view of RIS-enabled satellite networking that treats RIS as both satellite/terminal antennas and inter-satellite or space-ground relays. We show that system-level gains are governed by two unifying mechanisms: connectivity restoration via virtual line-of-sight links that preserve connectivity under blockage and mobility, and angular selectivity that reshapes interference to enlarge spectrum reuse. We further discuss practical operation under high mobility, highlighting Delay-Doppler channel acquisition, predictive beam tracking, and control designs that budget overhead and latency, and summarize hardware considerations for reliable operation in space. Finally, we outline forward-looking opportunities in the generative artificial intelligence paradigm, multifunctional RIS architectures, ubiquitous satellite integrated sensing and communication, and sustainable satellite Internet-of-Things.

eess.SP↗

arXiv2025

Movable Intelligent Surface-Enabled Wireless Communications: Static Phase Shifts with Mechanical Reconfigurability

Intelligent surfaces that reshape electromagnetic waves are regarded as disruptive technologies for wireless networks. However, existing designs sit at two costly extremes: dynamic reconfigurable intelligent surfaces (RISs) offer fine beam control but require dense cabling, continuous power consumption, and substantial signaling overhead, whereas low-cost static surfaces require no control lines or electronics but are limited to a single beam pattern. This disparity leaves a practical gap for quasi-static environments, such as industrial Internet-of-things and smart agriculture scenarios, where channels are stable with user demands changing only occasionally or periodically, and neither extreme is sufficiently economical or flexible. To bridge this gap, we propose a novel movable intelligent surface (MIS) architecture, whose beam patterns are switched not by electronic phase tuning but by mechanically sliding a small, pre-phased secondary metasurface layer across a larger, likewise static primary layer. We develop an MIS signal model that characterizes the interaction between static phase elements with dynamic geometry via binary selection matrices. Based on this model, we formulate a new type of optimization problems that jointly design static phase shifts and the overlapping position selection of MS2 (equal to beam pattern scheduling). Efficient algorithms based on the penalty method, block coordinate descent, and Riemannian manifold optimization are proposed to tackle these mixed-integer non-convex problems. Simulation results demonstrate that the proposed MIS architecture substantially narrows the performance gap between single-layer static surfaces and dynamic RISs, providing a practical and flexible solution for quasi-static wireless applications.

eess.SP↗

arXiv2025

Reconfigurable Airspace: Synergizing Movable Antenna and Intelligent Surface for Low-Altitude ISAC Networks

Low-altitude unmanned aerial vehicle (UAV) networks are integral to future 6G integrated sensing and communication (ISAC) systems. However, their deployment is hindered by challenges stemming from high mobility of UAVs, complex propagation environments, and the inherent trade-offs between coexisting sensing and communication functions. This article proposes a novel framework that leverages movable antennas (MAs) and intelligent reflecting surfaces (IRSs) as dual enablers to overcome these limitations. MAs, through active transceiver reconfiguration, and IRSs, via passive channel reconstruction, can work in synergy to significantly enhance system performance. Our analysis first elaborates on the fundamental gains offered by MAs and IRSs, and provides simulation results that validate the immense potential of the MA-IRS-enabled ISAC architecture. Two core UAV deployment scenarios are then investigated: (i) UAVs as ISAC users, where we focus on achieving high-precision tracking and aerial safety, and (ii) UAVs as aerial network nodes, where we address robust design and complex coupled resource optimization. Finally, key technical challenges and research opportunities are identified and analyzed for each scenario, charting a clear course for the future design of advanced low-altitude ISAC networks.

cs.IT↗

arXiv2025

Rotatable Antenna Enabled Spectrum Sharing: Joint Antenna Orientation and Beamforming Design

Conventional antenna arrays rely primarily on digital beamforming for spatial control. While adding more elements can narrow beamwidth and suppress interference, such scaling incurs prohibitive hardware and power costs. Rotatable antennas (RAs), which allow mechanical or electronic adjustment of element orientations, introduce a new degree of freedom to exploit spatial flexibility without enlarging the array. By dynamically optimizing orientations, RAs can substantially improve desired link alignment and interference suppression. This paper investigates RA-enabled multiple-input single-output (MISO) interference channels under co-channel spectrum sharing and formulates a weighted sum-rate maximization problem that jointly optimizes transmit beamforming and antenna orientations. To tackle this nonconvex problem, we develop an alternating optimization (AO) framework that integrates weighted minimum mean-square error (WMMSE)-based beamforming with Frank-Wolfe-based orientation updates. To reduce complexity, we further study orientation optimization under maximum-ratio transmission (MRT) and zero-forcing (ZF) beamforming schemes. For finite-resolution actuators, we construct spherical Fibonacci codebooks and design a cross-entropy method (CEM)-based algorithm for discrete orientation selection. Simulations show that integrating RAs with conventional beamforming markedly increases weighted sum-rate, with gains rising with element directivity. Under discrete orientation control, the proposed CEM algorithm consistently outperforms the nearest-projection baseline.

eess.SP↗

arXiv2025

Wireless Sensing with Movable Intelligent Surface

Future wireless networks are envisioned to deliver not only gigabit communications but also ubiquitous sensing. Reconfigurable intelligent surfaces (RISs) have emerged to reshape radio propagation, recently showing considerable promise for wireless sensing. Still, their per-element electronic tuning incurs prohibitive hardware cost and power consumption. Motivated by the concept of fluid antenna system (FAS), this paper introduces a low-cost movable intelligent surface (MIS) for wireless sensing, which replaces element-wise electronic phase tuning with panel-wise mechanical reconfiguration. The MIS stacks a large fixed and a smaller movable pre-phased metasurface layers, whose differential position shifts synthesize distinct composite phase patterns, enabling multiple beam patterns for multi-target detection. We characterize a MIS-enabled multi-hop echo signal model with multi-target interference and then formulate a worst-case sensing signal-to-interference-plus-noise ratio (SINR) maximization problem that jointly designs MIS phase shifts and schedules MS2's position. A Riemannian Augmented Lagrangian Method (RALM)-based algorithm is developed to solve the formulated mixed-integer non-convex problem. We also derive a heuristic MIS beam steering design with closed-form phase distribution and position scheduling. Simulations validate MIS's beam pattern reconfiguration capability, show that the RALM-based scheme significantly outperforms the closed-form scheme in improving sensing SINR, and uncover a gain-diversity trade-off in beam patterns that informs the optimal choice of MIS configuration.

eess.SP↗