SearcharxivSearch

arXiv subjects

Zongyao Zhao

Publications and source records attributed to Zongyao Zhao.

13 recordsLinked to original sources

Counter-GEO-Bench: Evaluating Defenses Against Information-Distorting Generative Engine Optimization

Generative engine optimization (GEO) enables content producers to increase the visibility of their web pages in generative search engines, but the same techniques can deliver targeted misinformation when adversaries publish ordinary-looking GEO-optimized documents that victim large language models (LLMs) retrieve and synthesize into distorted answers. No existing benchmark evaluates defenses against this threat under controlled conditions. Therefore, we present Counter-GEO-Bench, a defense benchmark that pairs 247 human-verified, quality-gated queries with information-preserving and information-distorting GEO rewrites, and evaluates defenses on attack success rate (ASR), false positive rate, and answer quality across three victim LLMs. Under Counter-GEO-Bench, three off-the-shelf defenses (Granite Guardian, Llama Guard 3, and NeMo Self-Check Fact-Checking) reduce ASR by at most 5.7% relative, while Granite Guardian's reduction is not statistically significant. Safety-taxonomy guardrails target policy violations, while GEO misinformation passes through them as fluent informational content. To this end, a lightweight benchmark baseline, C-GEO Guard, is proposed, reducing ASR by 47.6% relative with near-zero utility loss, which proves threat tractable.

cs.IR

Site-Specific Learning for Low-Overhead Multi-User MIMO Beamforming

A low-overhead site-specific multi-user multiple-input multiple-output (MU-MIMO) beamforming framework is proposed. Conventional limited-feedback MU-MIMO relies on channel state information reference signal (CSI-RS) transmission and user feedback before grouping and beamforming, which requires substantial online overhead when the antenna dimension and candidate-user pool are large. To reduce this burden, the proposed framework exploits site-specific information (SSI), which captures local radio propagation features. By learning the mapping from low-overhead beam-domain observations to effective transmit spatial subspaces of users, the BS can infer inter-user separability before high-resolution CSI acquisition and construct a compact group-level CSI acquisition subspace for the selected users. This site-specific design can be implemented within the standard limited-feedback procedure using synchronization signal block (SSB)-based reference signal received power (RSRP) fingerprints for subspace inference and CSI-RS feedback for low-dimensional CSI refinement. Extensive numerical results demonstrate that the proposed framework can identify compatible user groups before CSI-RS acquisition, preserve most scheduled-user channel energy in a compact group subspace, and achieve higher effective rates than conventional systems with significantly lower overhead and user-side processing burden.

eess.SP

B2X Networks: Joint Design of Communication and Control for Embodied Intelligence

This article proposes the concept of \emph{brain-body-to-everything (B2X)} networks to facilitate the integration of wireless networks and embodied intelligence. In this framework, the \emph{brain} refers to the intelligence functions for reasoning, planning, and decision-making, the \emph{body} denotes the physical embodied agent that senses and acts in the real world, and \emph{X} represents the surrounding ecosystem involved in the brain-body interaction loop. Two B2X architectures with \emph{distributed} and \emph{centralized} brains are introduced to characterize different placements of intelligence across the body, base station, and core network. The uplink and downlink designs of B2X networks are then discussed under a representative base-station-side brain setting. For the uplink, communication is redesigned for B2X state acquisition under event urgency, sensing volume, and simultaneous multi-body access. For the downlink, communication is redesigned to coordinate command delivery and conventional service under shared radio resources. Based on these uplink and downlink considerations, a communication-control Pareto boundary is further used to characterize the loop-level trade-off between wireless transmission performance and control quality in B2X networks. Finally, several open research problems are discussed to guide future B2X network design.

eess.SP

Agent-Native Wireless Communications: Architecture, Opportunities, and the Road Ahead

Future wireless networks are moving toward autonomous service operation, where network control and resource management need to respond to time-varying radio conditions and evolving service objectives. To address this shift, this article develops an agent-native wireless communication framework that characterizes the interplay between agent intelligence and communication systems. In this framework, the coupling is organized around \emph{agents for communications} and \emph{communications for agents}. For agent-native operation, the architecture is organized around deployable computing infrastructure, programmable open radio access network (O-RAN) software, and controllable communication interfaces. Based on this architecture, \emph{agents for communications} addresses the use of agents in communication-system design and operation, including agent-generated communication software and agent-driven adaptive wireless optimization. On the other side, \emph{communications for agents} addresses wireless service support for agent operation, including network-supported single-agent loops and network-assisted multi-agent coordination. Finally, it outlines promising research directions for measurable, safe, and interoperable deployment of agent-native wireless communications.

eess.SP

SiFo: Wireless Foundation Model for Low-Overhead Site-Specific CSI Feedback

SiFo, a wireless foundation model-based framework, is proposed for low-overhead site-specific channel state information (CSI) feedback. In 3GPP NR, Type-II feedback provides an expressive codebook-based CSI representation, but it requires substantial reference-signal overhead, UE-side search, and feedback. Learning-based site-specific feedback can reduce these online costs while retaining high-quality subspace representation by exploiting deployment-dependent propagation structure. However, existing site-specific designs typically train a dedicated neural network for each new site, which limits scalability when the number of deployments is large. SiFo addresses this scalability issue by pretraining a CSI feedback model across source sites and adapting it to a target site through lightweight calibration. A small set of target-site users reports low-dimensional reference signal received power (RSRP) fingerprints, and their full-CSI-based subspace labels are stored as calibration memory. During online operation, a served user is matched to calibrated users through the same SSB probing and RSRP reporting procedure, so nearby calibration samples provide site-specific subspace guidance without updating model parameters. SiFo therefore transfers common propagation knowledge while retaining local adaptation. Numerical results across ten city scenarios demonstrate that SiFo (i) achieves higher CSI-capture efficiency than separately trained site-specific learning baselines under the same target-site labeled budget, (ii) approaches the high-overhead 3GPP NR Type-II feedback reference using only RSRP measurements collected during online SSB probing, and (iii) converts the high CSI-capture efficiency and low overhead into effective spectral efficiency improvement under limited target-site data.

eess.SP

Bridging Standardized Codebook and Site-Specific Beamforming: A Unified Limited-Feedback Framework

A site-specific Type-II codebook design is proposed for downlink massive multiple-input multiple-output (MIMO) limited-feedback beamforming. The key idea is to embed a learned site-specific propagation prior into the Type-II channel state information (CSI) feedback pipeline. Specifically, the base station (BS) uses a low-overhead reference signal received power (RSRP) fingerprint collected during synchronization signal block (SSB) probing to infer a user equipment (UE)-dependent dominant beam subspace before explicit CSI acquisition. The UE then estimates and feeds back only the low-dimensional effective channel coefficients within this inferred subspace, thereby avoiding full-dimensional online subspace discovery while retaining a rich multi-beam representation capability. To analyze the proposed design and compare it with standardized feedback mechanisms, a unified subspace-projection framework is developed by jointly characterizing CSI acquisition, UE-side compression, BS-side reconstruction, and effective spectral efficiency. Under this framework, Type-I, Type-II, port-selection feedback, and the proposed scheme are interpreted as different ways of inducing a feedback representation subspace. The probing codebook and the BS-side subspace inference network are then formulated as a coupled task-oriented design problem and are optimized end-to-end by maximizing the normalized CSI-capture efficiency. Extensive simulation results demonstrate that the proposed feedback scheme achieves Type-II-comparable CSI-capture capability with substantially lower online overhead and UE-side complexity, thereby improving the effective spectral efficiency.

eess.SP

Cramér-Rao Bound Optimization for Near-Field ISAC with Extended Targets

Near-field integrated sensing and communication (ISAC) requires target models beyond the point-target abstraction when the target has a non-negligible spatial extent. In this letter, a geometry-aware transmit design is developed for a parametric extended target (ET) described by its center, orientation, and size under spherical-wave propagation. The CRB for the geometric parameters is formulated around a nominal ET state, an exact ET-aware reduced subspace is identified for the lifted covariance formulation, and a reduced-dimensional semidefinite relaxation (SDR) is developed under signal-to-interference-plus-noise ratio (SINR) and power constraints. Simulation results show lower CRB values than point-target and geometry-agnostic baselines together with substantially reduced runtime for large arrays.

eess.SP

Extended-Target Classification and Localization for Near-Field ISAC

Near-field integrated sensing and communication (ISAC) enables object-level sensing from distance-dependent array responses, yet most existing near-field methods still rely on point-target models and realistic extended targets remain largely unexplored. In this paper, joint target classification and range-azimuth localization are studied from channel responses of realistic extended targets. A dual-branch inference framework is proposed. Semantic and geometric branches are used for classification and localization, respectively. Cross-task attention is introduced after task-specific encoding so that complementary cues can be exchanged without forcing full feature sharing from the input stage. To improve localization on the same backbone, uncertainty-aware regression and a physics-guided structured objective are adopted, including planar consistency, peak-response regularization, and geometry-coupling constraints. Training and evaluation data are generated from full-wave electromagnetic scattering simulations of voxelized vehicle targets with randomized heading angles, material contrasts, and placements. The compared variants show that cross-task attention mainly benefits classification, while uncertainty-aware and structured supervision are needed to recover strong localization performance on the same backbone. Under the adopted shared-OFDM benchmark, the proposed framework reaches the best joint operating point with fewer sensing tones for the same target performance region.

eess.SP

A Spatio-Temporal-Frequency Transformer Framework for Near-Field Target Recognition

A target recognition framework relying on near-field integrated sensing and communication (ISAC) systems is proposed. By exploiting the distance-dependent spatial signatures provided by the near-field spherical wavefront, high-accuracy sensing is realized in a bandwidth-efficient manner. A spatio--temporal--frequency (STF) transformer framework is introduced for target recognition using electromagnetic features found in the wireless channel response. In particular, a lightweight spatial encoder is employed to extract features from the antenna array for each frame and subcarrier. These features are then fused by a time-frequency transformer head with positional embeddings to model temporal dynamics and cross-subcarrier correlations. Simulation results demonstrate that strong target recognition performance can be achieved even with limited bandwidth resources.

eess.SP

Bayesian Beamforming for Integrated Sensing and Communication Systems

The uncertainty of the sensing target brings great challenge to the beamforming design of the integrated sensing and communication (ISAC) system. To address this issue, we model the scattering coefficient and azimuth angle of the target as random variables and introduce a novel metric, expected detection probability (EPd), to quantify the average detection performance from a Bayesian perspective. Furthermore, we design a Bayesian beamforming scheme to optimize the expected detection probability under the limited power budget and communication performance constraints. A successive convex approximation and semidefinite relaxation-based (SCA-SDR) algorithm is developed for the complicated non-convex optimization problem corresponding to the beamforming scheme. Simulation results show that the proposed scheme outperforms other benchmarks and exhibits robust detection performance when parameters of the target are unknown and random.

eess.SP

B-ISAC: Backscatter Integrated Sensing and Communication for IoE Applications

The integration of backscatter communication (BackCom) technology with integrated sensing and communication (ISAC) technology not only enhances the system sensing performance, but also enables low-power information transmission. This is expected to provide a new paradigm for communication and sensing in internet of everything (IoE) applications. In this paper, we propose a novel cognitive wireless system called backscatter-ISAC (B-ISAC) and develop a joint beamforming framework for different stages (task modes). This system can achieve cognitive spectrum sharing between legacy communication, backscatter communication and sensing functions. We derive communication performance metrics of the system in terms of the signal-to-interference-plus-noise ratio (SINR) and communication rate, and derive sensing performance metrics of the system in terms of probability of detection, error of linear least squares (LS) estimation, and the error of linear minimum mean square error (LMMSE) estimation. The proposed joint beamforming framework consists of three stages: tag detection, tag estimation, and communication enhancement. We develop corresponding joint beamforming schemes aimed at enhancing the performance objectives of their respective stages by solving complex non-convex optimization problems. Extensive simulation results demonstrate the effectiveness of the proposed joint beamforming schemes. The proposed B-ISAC system has broad application prospect in next generation IoE scenarios.

eess.SP

Joint Beamforming for Multi-target Detection and Multi-user Communication in ISAC Systems

Detecting weak targets is one of the main challenges for integrated sensing and communication (ISAC) systems. Sensing and communication suffer from a performance trade-off in ISAC systems. As the communication demand increases, sensing ability, especially weak target detection performance, will inevitably reduce. Traditional approaches fail to address this issue. In this paper, we develop a joint beamforming scheme and formulate it as a max-min problem to maximize the detection probability of the weakest target under the constraint of the signal-to-interference-plus-noise ratio (SINR) of multi-user communication. An alternating optimization (AO) algorithm is developed for solving the complicated non-convex problem to obtain the joint beamformer. The proposed scheme can direct the transmit energy toward the multiple targets properly to ensure robust multi-target detection performance. Numerical results show that the proposed beamforming scheme can effectively increase the detection probability of the weakest target compared to baseline approaches while ensuring communication performance.

eess.SP

Joint Beamforming for Backscatter Integrated Sensing and Communication

Integrated sensing and communication (ISAC) is a key technology of next generation wireless communication. Backscatter communication (BackCom) plays an important role for internet of things (IoT). Then the integration of ISAC with BackCom technology enables low-power data transmission while enhancing the system sensing ability, which is expected to provide a potentially revolutionary solution for IoT applications. In this paper, we propose a novel backscatter-ISAC (B-ISAC) system and focus on the joint beamforming design for the system. We formulate the communication and sensing model of the B-ISAC system and derive the metrics of communication and sensing performance respectively, i.e., communication rate and detection probability. We propose a joint beamforming scheme aiming to optimize the communication rate under sensing constraint and power budget. A successive convex approximation (SCA) based algorithm and an iterative algorithm are developed for solving the complicated non-convex optimization problem. Numerical results validate the effectiveness of the proposed scheme and associated algorithms. The proposed B-ISAC system has broad application prospect in IoT scenarios.

eess.SP