arXiv subjects

Zu Hawn Sung

Publications and source records attributed to Zu Hawn Sung.

4 recordsLinked to original sources

arXiv2023

First Direct Observation of Nanometer size Hydride Precipitations on Superconducting Niobium

Superconducting niobium serves as a key enabling material for superconducting radio frequency (SRF) technology as well as quantum computing devices. At room temperature, hydrogen commonly occupies tetragonal sites in the Nb lattice as metal (M)-gas (H) phase. When the temperature is decreased, however, solid solution of Nb-H starts to be precipitated. In this study, we show the first identified topographical features associated with nanometer-size hydride phase (Nb1-xHx) precipitates on metallic superconducting niobium using cryogenic-atomic force microscopy (AFM). Further, high energy grazing incidence X-ray diffraction reveals information regarding the structure and stoichiometry that these precipitates exhibit. Finally, through time-of-flight secondary ion mass spectroscopy (ToF-SIMS), we are able to locate atomic hydrogen sources near the top surface. This systematic study further explains localized degradation of RF superconductivity by the proximity effect due to hydrogen clusters.

cond-mat.mtrl-sci↗

arXiv2023

Evaluation of predictive correlation between flux expulsion and grain growth for superconducting radio frequency cavities

A series of experiments were carried out in an effort to develop a simple method for predicting magnetic flux expulsion behavior of high purity niobium used to fabricate superconducting radio frequency (SRF) cavities. Using conventional metallographic characterizations in conjunction with high spatial resolution electron backscattered diffraction-orientation imaging microscopy (EBSD-OIM), we found that the flux expulsion behavior of 1.3 GHz single cell SRF Nb cavities is significantly associated with the grain growth of the Nb material during heat treatment. Most of Nb grains rapidly grew during 900C heat treatment, and likely full-recrystallized with 1000C HT. With comparison of the magnetic flux expulsion ratio (Bsc/Bnc) at dT = 5 K, the flux expulsion efficiency of the cavities increases along with increasing of grain size. Most interestingly, 900C HT shows a roughly linear trend that suggests this criterion could be used to predict appropriate heat treatment temperature for sufficient flux expulsion behavior in SRF-grade Nb. This result would be used to see if flux expulsion can be predicted by examining the materials coming from the Nb vendor, prior to cavity fabrication.

physics.acc-ph↗

arXiv2020

Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications

We report on atomic-scale analyses of grain boundary (GB) structures and segregation in Nb3Sn coatings on Nb, prepared by the vapor-diffusion process, for superconducting radiofrequency (SRF) cavity applications, utilizing atom-probe tomography, high-resolution scanning transmission electron-microscopy and first-principles calculations. We demonstrate that the chemical composition of Nb3Sn GBs is correlated strongly with the diffusion of Sn and Nb at GBs during the coating process. In a sample coated with a relatively large Sn flux, we observe an interfacial width of Sn segregation at a GB of ~3 nm, with a maximum concentration of ~35 at.%. After post-annealing at 1100 oC for 3 h, the Sn segregated at GBs disappears and Nb segregation is observed subsequently at GBs, indicating that Nb diffused into the Nb3Sn GBs from the Nb substrate. It is also demonstrated that the amount of Sn segregation in a Nb3Sn coating can be controlled by: (i) Sn flux; and (ii) the temperatures of the Nb substrates and Sn source, which may affect the overall kinetics including GB diffusion of Sn and Nb. An investigation of the correlation between the chemical compositions of GBs and Nb3Sn SRF cavity performance reveals that the Nb3Sn SRF cavities with the best performance (high-quality factors at high accelerating electric-field gradients) do not exhibit Sn segregation at GBs. Our results suggest that the chemical compositions of GBs in Nb3Sn coatings for SRF cavities can be controlled by GB engineering and can be utilized to optimize fabrication of high-quality Nb3Sn coatings for SRF cavities.

cond-mat.mtrl-sci↗

arXiv2011

Evidence that the upper critical field of Nb3Sn is independent of whether it is cubic or tetragonal

Although 2011 marks the 50th anniversary of Nb3Sn as the first high field superconductor, real understanding of its upper critical field behavior μ0Hc2 is incomplete. Here we show surprising μ0Hc2 data on highly homogeneous bulk samples examined both by small-current, transport and by volumetric-averaging specific heat and the reversible magnetization techniques, which exhibit identical upper critical field μ0Hc2(0.3 K) ~ 29{\pm} 0.2 T with or without undergoing the cubic to tetragonal transition, a result in strong contrast to widely used multiple-source data compilations that show a strong depression of μ0Hc2(0K) from 29 T to 21.4 T in the tetragonal state.

cond-mat.supr-con↗