arXiv subjects

Zuhawn Sung

Publications and source records attributed to Zuhawn Sung.

8 recordsLinked to original sources

arXiv2026

Effect of metal encapsulation on bulk superconducting properties of niobium thin films used in qubits

Niobium metal occupies nearly 100\% of the volume of a typical 2D transmon device. While the aluminum Josephson junction is of utmost importance, maintaining quantum coherence across the entire device means that pair-breaking in Nb leads, capacitive pads, and readout resonators can be a major source of decoherence. The established contributors are surface oxides and hydroxides, as well as absorbed hydrogen and oxygen. Metal encapsulation of freshly grown surfaces with non-oxidizing metals, preferably without breaking the vacuum, is a successful strategy to mitigate these issues. While the positive effects of encapsulation are undeniable, it is important to understand its impact on the macroscopic behavior of niobium films. We present a comprehensive study of the bulk superconducting properties of Nb thin films encapsulated with gold and palladium/gold, and compare them to those of bare Nb films. Magneto-optical imaging, magnetization, resistivity, and London and Campbell penetration depth measurements reveal significant differences in encapsulated samples. Both sputtered, and epitaxial Au-capped films exhibit the highest residual resistivity ratio and superconducting transition temperature, as well as the lowest upper critical field, London penetration depth, and critical current. These results are in good agreement with the microscopic theory of anisotropic normal and superconducting states of Nb. We conclude that pair-breaking in the bulk of niobium films, driven by disorder throughout the film rather than just at the surface, is a significant source of quantum decoherence in transmons. We also conclude that gold capping not only passivates the surface but also affects the properties of the entire film, significantly reducing the scattering rate due to defects likely induced by surface diffusion if the film is not protected immediately after fabrication.

cond-mat.supr-con↗

arXiv2026

Oxygen distribution and segregation at grain boundaries in Nb and Ta-encapsulated Nb thin films for superconducting qubits

We report on atomic-scale analyses of oxygen distribution and segregation at grain boundaries (GBs) of Nb and Ta-encapsulated Nb (Ta/Nb) thin films for superconducting qubits using atom-probe tomography (APT) and transmission electron microscopy (TEM). We observe oxygen segregation at grain boundaries (GBs) relative to the oxygen concentration within the grains for both Nb and Ta-capped Nb thin films for superconducting qubits and find that higher oxygen concentration in the interior of Nb grains lead to greater oxygen segregation levels at GBs. This finding emphasizes that controlling oxygen impurities in Nb during film deposition and fabrication processing is important to reduce the level of oxygen segregation at GBs in Nb. The enrichment factor (Cgb/Cgrain) for oxygen segregation at GBs in Nb is 2.7 (error bar: 0.3) for Nb films, and Ta-capped Nb thin films exhibit slightly reduced Nb GB enrichment factors of 2.3 (error bar: 0.3) while GBs in the Ta capping layer itself possess higher enrichment factors of 3.0 (error bar: 0.3). We hypothesize that the Ta capping layer can trap oxygen and thereby affect oxygen in-diffusion and segregation at GBs in the underlying Nb thin films. Finally, we find that increases in the oxygen concentration in both Nb grains and GBs correlate with a suppression in the critical temperature for superconductivity (Tc). Together, our comparative chemical and charge transport property analyses provide atomic-scale insights into a potential mechanism contributing to decoherence in superconducting qubits.

cond-mat.supr-con↗

arXiv2025

Discovery of Niobium Hydride Precipitates in Superconducting Qubits

We report the evidence of the formation of niobium hydride phase within niobium films on silicon substrates in superconducting qubits fabricated at Rigetti Computing. For this study, we combined complementary techniques, including room-temperature and cryogenic atomic force microscopy (AFM), synchrotron Xray diffraction, and time of flight secondary ion mass spectroscopy (ToF-SIMS), to directly reveal the existence of niobium hydride precipitates in the Rigetti chip area. Upon cryogenic cooling, we observed variation in the size and morphology of the hydrides, ranging from small (5 nm) irregular shapes to large (~10-100 nm) domain within the Nb grains, fully converted to niobium hydrides. Since niobium hydrides are non-superconducting and can easily change in size and location upon different cooldowns to cryogenic temperature, our finding highlights a new and previously unknown source of decoherence in superconducting qubits. This contributes to both quasiparticle and two level system (TLS) losses, offering a potential explanation for changes in qubit performance upon cooldowns. Finally, by leveraging the RF performance of a 3D bulk Nb resonator, we can quantify RF dissipation on a superconducting qubit, caused by hydrogen concentration variation, and are able to propose a practical engineering pathway to mitigate the formation of the Nb hydrides for superconducting qubit applications.

cond-mat.supr-con↗

arXiv2025

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

quant-ph↗

arXiv2023

Nuclear Magnetic Resonance Investigation of Superconducting and Normal State Nb$_3$Sn

The superconductor Nb$_3$Sn has a high critical temperature and high critical field, widely used for high-field superconducting magnets. In this work we investigate its microscopic electronic structure with $^{93}$Nb nuclear magnetic resonance (NMR). The high-quality Nb$_3$Sn powder sample was studied in both 3.2T and 7T magnetic fields in the temperature range from 1.5K to 300K. From measurement of the spectrum and its theoretical analysis, we find evidence for anisotropy despite its cubic crystal structure. This anisotropy is manifest in alignment of powder grains under certain temperature and field cycling conditions. The Knight shift and spin-lattice relaxation rate, $T_1^{-1}$, were measured in the normal state. Additionally, $T_1^{-1}$ was measured in the superconducting state and compared with BCS theory revealing a weak field dependence, with an energy gap $Δ(0)=2.0\pm0.08k_B T_c$ at 3.2T and $Δ(0)=1.73\pm0.08k_B T_c$ at 7T, indicating suppression of the order parameter by magnetic field.

cond-mat.supr-con↗

arXiv2023

Discovery of Nb hydride precipitates in superconducting qubits

We report the first evidence of the formation of niobium hydrides within niobium films on silicon substrates in superconducting qubits fabricated at Rigetti Computing. We combine complementary techniques including room and cryogenic temperature atomic scale high-resolution and scanning transmission electron microscopy (HR-TEM and STEM), atomic force microscopy (AFM), and the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) to reveal the existence of the niobium hydride precipitates directly in the Rigetti chip areas. Electron diffraction and high-resolution transmission electron microscopy (HR-TEM) analyses are performed at room and cryogenic temperatures (~106 K) on superconducting qubit niobium film areas, and reveal the formation of three types of Nb hydride domains with different crystalline orientations and atomic structures. There is also variation in their size and morphology from small (~5 nm) irregular shape domains within the Nb grains to large (~10-100 nm) Nb grains fully converted to niobium hydride. As niobium hydrides are non-superconducting and can easily change in size and location upon different cooldowns to cryogenic temperatures, our findings highlight a new previously unknown source of decoherence in superconducting qubits, contributing to both quasiparticle and two-level system (TLS) losses, and offering a potential explanation for qubit performance changes upon cooldowns. A pathway to mitigate the formation of the Nb hydrides for superconducting qubit applications is also discussed.

quant-ph↗

arXiv2022

Contactless Excitation of Acoustic Resonance in Insulating Wafers

Contactless excitation and detection of high harmonic acoustic overtones in a thin insulator single crystal are described using radio frequency spectroscopy techniques. Single crystal [001] silicon wafer samples were investigated, one side covered with a Nb thin film, the common starting point for fabrication of quantum devices. The coupling between electromagnetic signals and mechanical oscillation is achieved from the Lorentz force generated by an external magnetic field. This method is suitable for any sample with a metallic surface or covered with a thin metal film. High resolution measurements of the temperature dependence of the sound velocity and elastic constants of silicon are reported and compared with known results.

physics.app-ph↗

arXiv2022

Stress-induced omega phase transition in Nb thin films for superconducting qubits

We report the observation of omega phase formation in Nb thin films deposited by high-power impulse magnetron sputtering (HiPIMS) for superconducting qubits using transmission electron microscopy (TEM). We hypothesize that this phase transformation to the omega phase with hexagonal structure from bcc phase as well as the formation of {111}<112> mechanical twins is induced by internal stress in the Nb thin films. In terms of lateral dimensions, the size of the omega phase of Nb range from 10 to 100 nm, which is comparable to the coherence length of Nb (~40 nm). In terms of overall volume fraction, ~1 vol.% of the Nb grains exhibit this omega phase. We also find that the omega phase in Nb is not observed in large grain Nb samples, suggesting that the phase transition can be suppressed through reducing the grain boundary density, which may serve as a source of strain and dislocations in this system. The current finding may indicate that the Nb thin film is prone to the omega phase transition due to the internal stress in the Nb thin film. We conclude by discussing effects of the omega phase on the superconducting properties of Nb thin films and discussing pathways to mitigate their formation.

cond-mat.supr-con↗