SearcharxivSearch

arXiv subjects

Zuliang Du

Publications and source records attributed to Zuliang Du.

13 recordsLinked to original sources

Twisting enabled charge transfer excitons in epitaxially fused quantum dot molecules

Charge-transfer excitons possessing long radiative lifetime and net permanent dipole moment are highly appealing for quantum dot (QD) based energy harvesting and photodetecting devices, in which the efficiency of charge separation after photo-excitation limits the device performance. Herein, using a hybrid time-dependent density functional theory, we have demonstrated that the prevailing rule of selecting materials with staggered type-II band alignment for realization of charge-transfer exciton breaks down in epitaxially fused QD molecules. The excitonic many-body effects are found to be significant and distinct depending on the exciton nature, causing unexpected reverse ordering of exciton states. Strikingly, twisting QD molecule appears as an effective means of modulating the orbital spatial localization towards charge separation that is mandatory for a charge-transfer exciton. Meanwhile, it manifests the intra-energy-level splitting that counterbalances the distinct many-body effects felt by excitons of different nature, thus ensuring the successful generation of energetically favourable charge-transfer exciton in both homodimer and heterodimer QD molecules. Our study extends the realm of twistroincs into zero-dimensional materials, and provides a genuine route of manipulating the exciton nature in QD molecules.

cond-mat.mes-hall

Excitons in InP, GaP, GaInP quantum dots: Insights from time-dependent density functional theory

Colloidal quantum dots (QDs) of group III-V are considered as promising candidates for next-generation environmentally friendly light emitting devices, yet there appears to be only limited understanding of the underlying electronic and excitonic properties. Using large-scale density functional theory with the hybrid B3LYP functional solving the single-particle states and time-dependent density functional theory accounting for the many-body excitonic effects, we have identified the structural, electronic and excitonic optical properties of InP, GaP and GaInP QDs containing up to a thousand atoms or more. The calculated optical gap of InP QD appears in excellent agreement with available experiments, and it scales nearly linearly with the inverse diameter. The radiative exciton decay lifetime is found to increase surprisingly linearly with increasing the dot size. For GaP QDs, we predict an unusual electronic state crossover at diameter around 1.5 nm whereby the nature of the lowest unoccupied molecular orbital (LUMO) state switches its symmetry from $Γ_{5}$-like at larger diameter to $Γ_{1}$-like at smaller diameter. After the crossover, the absorption intensity of the band-edge exciton states is significantly enhanced. Finally, we find that Vegard's law holds very well for GaInP random alloyed quantum dots down to ultra-small sizes with less than a hundred atoms. The obtained energy gap bowing parameter of this common-cation compound in QD regime appears positive, size-dependent and much smaller than its bulk parentage. The volume deformation, dominating over the charge exchange and structure relaxation effects, is mainly responsible for the QD energy gap bowing. The present work provides a road map for a variety of electronic and optical properties of colloidal QDs in group III-V that can guide spectroscopic studies.

cond-mat.mtrl-sci

Biomimetic fabrication and tunable wetting properties of three-dimensional hierarchical ZnO structures by combining soft lithography templated with lotus leaf and hydrothermal treatments

Three-dimensional hierarchical ZnO films with lotus-leaf-like micro/nano structures were successfully fabricated via a biomimetic route combining sol-gel technique, soft lithography and hydrothermal treatments. PDMS mold replicated from a fresh lotus leaf was used to imprint microscale pillar structures directly into a ZnO sol film. Hierarchical ZnO micro/nano structures were subsequently fabricated by a low-temperature hydrothermal growth of secondary ZnO nanorod arrays on the micro-structured ZnO film. The morphology and size of ZnO hierarchical micro/nano structures can be easily controlled by adjusting the hydrothermal reaction time. Wettability of hierarchical ZnO thin films was found to convert from superhydrophilicity to hydrophobicity after a low-surface-energy fluoroalkylsilane modification. Improved wetting properties from hydrophobic to superhydrophobic can be tuned by increasing the growth of ZnO nanorods structures.

cond-mat.mtrl-sci

Electrochemical Deposition of ZnO Hierarchical Nanostructures from Hydrogel Coated Electrodes

The electrochemical deposition of ZnO hierarchical nanostructures directly from PHEMA hydrogel coated electrodes has been successfully demonstrated. A variety of hierarchical ZnO nanostructures, including porous nanoflakes, nanosheets and nanopillar arrays were fabricated directly from the PHEMA hydrogel coated electrodes. Hybrid ZnO-hydrogel composite films were formed with low zinc concentration and short electrodeposition time. A dual-layer structure consisting of a ZnO/polymer and pure ZnO layer was obtained with zinc concentration above 0.01 M. SEM observations and XPS depth profiling were used to investigate ZnO nanostructure formation in the early electrodeposition process. A growth mechanism to understand the formation of ZnO/hydrogel hybrid hierarchical nanostructures was developed. The I-V characteristics of the ZnO-hydrogel composite films in dark and under ultraviolet (UV) illumination demonstrate potential applications in UV photodetection.

cond-mat.mtrl-sci

Preparation of Highly Crystalline TiO2 Nanostructures by Acid-assisted Hydrothermal Treatment of Hexagonal-structured Nanocrystalline Titania/Cetyltrimethyammonium Bromide Nanoskeleton

Highly crystalline TiO2 nanostructures were prepared through a facile inorganic acid-assisted hydrothermal treatment of hexagonal-structured assemblies of nanocrystalline titiania templated by cetyltrimethylammonium bromide (Hex-ncTiO2/CTAB Nanoskeleton) as starting materials. All samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The influence of hydrochloric acid concentration on the morphology, crystalline and the formation of the nanostructures were investigated. We found that the morphology and crystalline phase strongly depended on the hydrochloric acid concentrations. More importantly, crystalline phase was closely related to the morphology of TiO2 nanostructure. Nanoparticles were polycrystalline anatase phase, and aligned nanorods were single crystalline rutile phase. Possible formation mechanisms of TiO2 nanostructures with various crystalline phases and morphologies were proposed.

cond-mat.mtrl-sci

Fabrication of surface-patterned ZnO thin films using sol-gel methods and nanoimprint lithography

Surface-patterned ZnO thin films were fabricated by direct imprinting on ZnO sol and subsequent annealing process. The polymer-based ZnO sols were deposited on various substrates for the nanoimprint lithography and converted to surface-patterned ZnO gel films during the thermal curing nanoimprint process. Finally, crystalline ZnO films were obtained by subsequent annealing of the patterned ZnO gel films. The optical characterization indicates that the surface patterning of ZnO thin films can lead to an enhanced transmittance. Large-scale ZnO thin films with different patterns can be fabricated by various easy-made ordered templates using this combination of sol-gel and nanoimprint lithography techniques.

cond-mat.mtrl-sci

Strong Visible Absorption and Photoluminescence of Titanic Acid Nanotubes by Hydrothermal Method

Titanic acid nanotubes (with a chemical formula H2Ti2O4(OH)2, abbreviated as TANTs) were synthesized by the hydrothermal method using commercial TiO2 nanoparticle powder (P25, Degussa, Germany) including anatase and rutile phase as a starting material. Conversion from nanoparticles to nanotubes was achieved by treating the nanoparticle powder with 10 M NaOH aqueous solution. Absorption and photoluminescence (PL) data indicate that the nanotubes obtained under slow and suitable drying and heating conditions had very strong and stable visible absorption with three peaks at 515, 575, and 675 nm and photoluminescence at room temperature in air.

cond-mat.mtrl-sci

Single-crystal silver nanowires: Preparation and Surface-enhanced Raman Scattering (SERS) property

Ordered Ag nanowire arrays with high aspect ratio and high density self-supporting Ag nanowire patterns were successfully prepared using potentiostatic electrodeposition within the confined nanochannels of a commercial porous anodic aluminium oxide (AAO) template. X-ray diffraction and selected area electron diffraction analysis show that the as-synthesized samples have preferred (220) orientation. Transmission electron microscopy and scanning electron microscopy investigation reveal that large-area and ordered Ag nanowire arrays with smooth surface and uniform diameter were synthesized. Surface-enhanced Raman Scattering (SERS) spectra show that the Ag nanowire arrays as substrates have high SERS activity.

cond-mat.mtrl-sci

Fabrication of hydrophobic inorganic coatings on natural lotus leaves for nanoimprint stamps

Hydrophobic inorganic films were obtained by direct deposition of copper or silicon onto natural lotus leaves by ion beam sputtering deposition technique. Scanning electron microscopy observations showed a lotus-leaf-like surface structure of the deposited inorganic films. Hydrophobic nature of the inorganic films on lotus leaves had been improved compared to the inorganic films deposited on flat silicon substrates. Water contact angles measured on the lotus-leaf-like copper and silicon films were 136.3 \pm 8° and 117.8 \pm 4.4°, respectively. The hydrophobic lotus-leaf-like inorganic films had been repeated used as nanoimprint stamps. Negative structures of lotus-leaf-like inorganic films were obtained on the polystyrene resist layers.

cond-mat.mtrl-sci

Analysis of Raman modes in Mn-doped ZnO nanocrystals

Mn-doped ZnO was synthesized using a co-precipitation technique. X-ray diffraction (XRD) measurements and photoluminescence (PL) spectra show that Mn ions are doped into the lattice positions of ZnO. The modes at 202, 330, and 437 cm-1 in the Raman spectrum are assigned as 2E2 (low), E2 (high)-E2 (low), and E2 (high) modes of ZnO base, respectively. The mode at 528 cm-1 is ascribed to a local vibrational mode related to Mn. The mode at 580 cm-1 should be an intrinsic mode of ZnO and assigned to E1 longitudinal optical (LO). Its reinforcement should result from a combination of resonance at the excitation wavelength and impurity-induced scattering.

cond-mat.mtrl-sci

Fabrication of nanopatterned DNA films by Langmuir-Blodgett technique

Fractal-like nanopatterned DNA thin films have been fabricated on mica substrate by Langmuir-Blodgett (LB) technique. Structures and components of DNA nanopatterns were investigated using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The effect of surface pressure on the transferred DNA composite films has been studied. Scanning force microscopic observations revealed that the surface structure and morphology of DNA nanopatterns can be well controlled by changing the surface pressure. The growth mechanism of the fractal-like nanopatterns is discussed in terms of the diffusion-limited aggregation (DLA) model. The formation of large-scale DNA networks provided a well-defined template for the construction of nanocomposite films. Patterns of silver metal were prepared on DNA networks by subsequent metallization process.

cond-mat.mtrl-sci

Preparation of silver nanopatterns on DNA templates

Patterns of silver metal were prepared on DNA networks by a template-directed selective deposition and subsequent metallization process. Scanning force microscopic observations and XPS investigations demonstrated that uniform networks of nanosized silver metal clusters formed after incubation of DNA LB films with silver ions and subsequent chemical reduction of silver ions/DNA films samples. The results showed that this template-directed metallization on DNA LB films provided a simple and effective method for the construction of functional nanocomposite films.

cond-mat.mtrl-sci

Structural properties and Raman spectroscopy of lipid Langmuir monolayers at the air-water interface

Spectra of octadecylamine (ODA) Langmuir monolayers and egg phosphatidylcholine (PC)/ODA-mixed monolayers at the air-water interface have been acquired. The organization of the monolayers has been characterized by surface pressure-area isotherms. Application of polarized optical microscopy provides further insight in the domain structures and interactions of the film components. Surface-enhanced Raman scattering (SERS) data indicate that enhancement in Raman spectra can be obtained by strong interaction between headgroups of the surfactants and silver particles in subphase. By mixing ODA with phospholipid molecules and spreading the mixture at the air-water interface, we acquired vibrational information of phospholipid molecules with surfactant-aided SERS effect.

cond-mat.mtrl-sci