arXiv subjects

Zuxin Chen

Publications and source records attributed to Zuxin Chen.

12 recordsLinked to original sources

arXiv2026

Excitons probe intrinsic flat band Mottness in a van der Waals heterostructure

Excitons provide a sensitive optical probe of electronic correlations in nearby two-dimensional materials, yet their coupling to intrinsic flat-band Mott systems remains largely unexplored. Here we combine gate-tunable optical spectroscopy with first-principles calculations to study monolayer WSe$_2$ in direct contact with the van der Waals Mott insulator Nb$_3$Cl$_8$. The gate evolution of WSe$_2$ excitonic resonances reveals signatures of a correlation-reconstructed Mott gap in Nb$_3$Cl$_8$ that is absent from the single-particle band picture. In the electron-doped regime, the WSe$_2$ 2s Rydberg exciton undergoes a multistage evolution and develops into interlayer attractive and repulsive polaron branches, showing that a Rydberg exciton can be dressed by strongly correlated flat-band electrons in an adjacent Mott layer. Under an out-of-plane magnetic field, spin-polarized Nb$_3$Cl$_8$ states further induce valley-selective exciton coupling, producing a strongly enhanced circular polarization of the WSe$_2$ exciton emission. These results extend exciton-based sensing and exciton-polaron physics to intrinsic flat-band Mott materials, providing an optical route to probe and engineer correlation-driven interfacial quasiparticles.

cond-mat.mtrl-sci↗

arXiv2026

Direct observation of anisotropic exciton dispersion in the 2D semiconductor CrSBr

We report momentum-resolved measurements of exciton dispersion in multilayer CrSBr using defocus-engineered electron energy-loss spectroscopy, supported by first-principles calculations. A pronounced in-plane anisotropy is observed, with the exciton exhibiting a linear dispersion along $Γ$Y within $\lvert \boldsymbol{q} \rvert$ < 0.007 Å$^{-1}$, while remaining nearly dispersionless along $Γ$X. The slope reaches 7.02 eV Å, among the largest reported in low-dimensional systems. The calculations reproduce the experimentally observed linear dispersion, confirming its intrinsic origin. We attribute the anisotropic dispersion to the long-range electron--hole exchange interaction, enhanced by strong out-of-plane confinement and governed by the directional selection rules of the transition dipole moment. Comparative measurements across the magnetic phase transition from the paramagnetic to the A-type antiferromagnetic state show that the dispersion remains essentially unchanged, indicating negligible coupling between exciton propagation and magnetic order. These results establish CrSBr as a model system for investigating anisotropic exciton dynamics in low-symmetry layered semiconductors.

cond-mat.mtrl-sci↗

arXiv2026

Layer-parity-defined surface polarization in Nb$_3$Cl$_8$ for excitonic modulation at van der Waals interfaces

The intrinsic symmetry breaking in the breathing kagome lattice of layered Nb$_3$Cl$_8$ provides a unique mechanism for realizing electrically polar surfaces. In each monolayer, the trimerization of Nb atoms breaks inversion and mirror symmetries, generating an out-of-plane electric dipole. The AB-stacked $α$ phase arranges adjacent layer dipoles antiferroelectrically, leaving the uncompensated surface polarization strictly governed by layer parity. Here, using atomic force microscopy operated in Kelvin probe force microscopy mode, we directly visualize layer-dependent polarization states in exfoliated Nb$_3$Cl$_8$ flakes and resolve a pronounced odd-even oscillation of the surface electrostatic potential. Beyond this parity-locked antiferroelectric order, we further identify intralayer polar domains in which local atomic reconstructions of the breathing kagome network reverse the out-of-plane dipole of the surface layer, producing ferroelectric-like stacking configurations. By interfacing monolayer MoSe$_2$ with Nb$_3$Cl$_8$, we demonstrate that these surface-polarization textures effectively modulate adjacent excitonic emission through domain-dependent interfacial band alignment and charge transfer. Our findings establish Nb$_3$Cl$_8$ as an intrinsic layer-polarized van der Waals platform and show that layer parity provides powerful structural degree of freedom for programming excitonic and optoelectronic responses at van der Waals interfaces.

cond-mat.mtrl-sci↗

arXiv2025

Polarized electroluminescence with magnetic spectral tuning in van der Waals magnet CrSBr

Polarized wavelength-tunable electroluminescence (EL) represents a critical on-demand functionality for next-generation optoelectronics. While conventional van der Waals (vdW) EL devices offer discrete wavelength switching constrained by fixed emission states, we report a novel platform enabling continuous spectral tuning combined with intrinsically polarized emission. By leveraging exciton-assisted inelastic tunneling in the anisotropic magnet CrSBr, our devices achieve uniform EL with a near unity degree of linear polarization ($\approx$ 94.3$\%$). The strong magneto-electronic coupling in CrSBr facilitates continuous magnetic-field-controlled spectral tuning through spin canting-induced band renormalization. This work establishes vdW magnets as a versatile platform for developing reconfigurable polarized light sources with simultaneous spectral and polarization control.

cond-mat.mtrl-sci↗

arXiv2025

Spin texture and tunneling magnetoresistance in atomically thin CrSBr

The exploration of spin configurations and magnetoresistance in van der Waals magnetic semiconductors, particularly in the realm of thin-layer structures, is of paramount significance for the development of two-dimensional spintronic nanodevices. In this letter, we present detailed magneto-transport and photoluminescence studies on few-layer CrSBr flakes utilizing a vertical tunneling device configuration. Our investigations revealed complex magnetic states along the evolutionary path of few-layer CrSBr. We observed intermediate states exhibiting identical net magnetization demonstrate rectification properties, reminiscent of a diode-like behavior at positive and negative bias voltages. Notably, in devices with 5-layer CrSBr, we detected an intriguing positive magnetoresistive state when subjected to an in-plane magnetic field along the b-axis. The implementation of the Mott two-current model successfully calculated the tunneling resistance of different magnetic states, thereby elucidating the spin configurations responsible for the observed transport phenomena. These insights not only provide new perspectives on the intricate spin textures of two-dimensional CrSBr but also highlight the efficacy of tunneling measurements as a sensitive method for probing magnetic order in van der Waals materials.

cond-mat.mes-hall↗

arXiv2025

Unexpected versatile electrical transport behaviors of ferromagnetic nickel films

Perpendicular magnetic anisotropy (PMA) of magnets is paramount for electrically controlled spintronics due to their intrinsic potentials for higher memory density, scalability, thermal stability and endurance, surpassing an in-plane magnetic anisotropy (IMA). Nickel film is a long-lived fundamental element ferromagnet, yet its electrical transport behavior associated with magnetism has not been comprehensively studied, hindering corresponding spintronic applications exploiting nickel-based compounds. Here, we systematically investigate the highly versatile magnetism and corresponding transport behavior of nickel films. As the thickness reduces within the general thickness regime of a magnet layer for a memory device, the hardness of nickel films' ferromagnetic loop of anomalous Hall effect increases and then decreases, reflecting the magnetic transitions from IMA to PMA and back to IMA. Additionally, the square ferromagnetic loop changes from a hard to a soft one at rising temperatures, indicating a shift from PMA to IMA. Furthermore, we observe a butterfly magnetoresistance resulting from the anisotropic magnetoresistance effect, which evolves in conjunction with the thickness and temperature-dependent magnetic transformations as a complementary support. Our findings unveil the rich magnetic dynamics and most importantly settle down the most useful guiding information for current-driven spintronic applications based on nickel film: The hysteresis loop is squarest for the ~8 nm-thick nickel film, of highest hardness with Rxyr/Rxys~1 and minimum Hs-Hc, up to 125 K; otherwise, extra care should be taken for a different thickness or at a higher temperature.

cond-mat.mtrl-sci↗

arXiv2024

TransferFuzz: Fuzzing with Historical Trace for Verifying Propagated Vulnerability Code

Code reuse in software development frequently facilitates the spread of vulnerabilities, making the scope of affected software in CVE reports imprecise. Traditional methods primarily focus on identifying reused vulnerability code within target software, yet they cannot verify if these vulnerabilities can be triggered in new software contexts. This limitation often results in false positives. In this paper, we introduce TransferFuzz, a novel vulnerability verification framework, to verify whether vulnerabilities propagated through code reuse can be triggered in new software. Innovatively, we collected runtime information during the execution or fuzzing of the basic binary (the vulnerable binary detailed in CVE reports). This process allowed us to extract historical traces, which proved instrumental in guiding the fuzzing process for the target binary (the new binary that reused the vulnerable function). TransferFuzz introduces a unique Key Bytes Guided Mutation strategy and a Nested Simulated Annealing algorithm, which transfers these historical traces to implement trace-guided fuzzing on the target binary, facilitating the accurate and efficient verification of the propagated vulnerability. Our evaluation, conducted on widely recognized datasets, shows that TransferFuzz can quickly validate vulnerabilities previously unverifiable with existing techniques. Its verification speed is 2.5 to 26.2 times faster than existing methods. Moreover, TransferFuzz has proven its effectiveness by expanding the impacted software scope for 15 vulnerabilities listed in CVE reports, increasing the number of affected binaries from 15 to 53. The datasets and source code used in this article are available at https://github.com/Siyuan-Li201/TransferFuzz.

cs.SE↗

arXiv2024

Intrinsic localized excitons in MoSe$_2$/CrSBr heterostructures

We present a comprehensive investigation of optical properties in MoSe$_2$/CrSBr heterostructures, unveiling the presence of localized excitons represented by a new emission feature, X$^*$. We demonstrate through temperature- and power-dependent photoluminescence spectroscopy that X$^*$ originates from excitons confined by intrinsic defects within the CrSBr layer. The valley polarization of X$^*$ and trion peaks displays opposite polarity under a magnetic field, which closely correlates with the magnetic order of CrSBr. This is attributed to spin-dependent charge transfer mechanisms across the heterointerface, supported by density functional theory calculations revealing a type-II band alignment and spin-polarized band structures. Furthermore, the strong in-plane anisotropy of CrSBr induces unique polarization-dependent responses in MoSe$_2$ emissions. Our study highlights the crucial role of defects in shaping excitonic properties. It offers valuable insights into spectral-resolved proximity effects in van der Waals heterostructures between semiconductor and magnet, contributing to advancing spintronic and valleytronic devices.

cond-mat.mes-hall↗

arXiv2023

LibAM: An Area Matching Framework for Detecting Third-party Libraries in Binaries

Third-party libraries (TPLs) are extensively utilized by developers to expedite the software development process and incorporate external functionalities. Nevertheless, insecure TPL reuse can lead to significant security risks. Existing methods are employed to determine the presence of TPL code in the target binary. Existing methods, which involve extracting strings or conducting function matching, are employed to determine the presence of TPL code in the target binary. However, these methods often yield unsatisfactory results due to the recurrence of strings and the presence of numerous similar non-homologous functions. Additionally, they struggle to identify specific pieces of reused code in the target binary, complicating the detection of complex reuse relationships and impeding downstream tasks. In this paper, we observe that TPL reuse typically involves not just isolated functions but also areas encompassing several adjacent functions on the Function Call Graph (FCG). We introduce LibAM, a novel Area Matching framework that connects isolated functions into function areas on FCG and detects TPLs by comparing the similarity of these function areas. Furthermore, LibAM is the first approach capable of detecting the exact reuse areas on FCG and offering substantial benefits for downstream tasks. Experimental results demonstrate that LibAM outperforms all existing TPL detection methods and provides interpretable evidence for TPL detection results by identifying exact reuse areas. We also evaluate LibAM's accuracy on large-scale, real-world binaries in IoT firmware and generate a list of potential vulnerabilities for these devices. Last but not least, by analyzing the detection results of IoT firmware, we make several interesting findings, such as different target binaries always tend to reuse the same code area of TPL.

cs.SE↗

arXiv2023

Controlling the 2D magnetism of CrBr$_3$ by van der Waals stacking engineering

The manipulation of two-dimensional (2D) magnetic order is of significant importance to facilitate future 2D magnets for low-power and high-speed spintronic devices. Van der Waals stacking engineering makes promises for controllable magnetism via interlayer magnetic coupling. However, directly examining the stacking order changes accompanying magnetic order transitions at the atomic scale and preparing device-ready 2D magnets with controllable magnetic orders remain elusive. Here, we demonstrate effective control of interlayer stacking in exfoliated CrBr$_3$ via thermally assisted strain engineering. The stable interlayer ferromagnetic (FM), antiferromagnetic (AFM), and FM-AFM coexistent ground states confirmed by the magnetic circular dichroism measurements are realized. Combined with the first-principles calculations, the atomically-resolved imaging technique reveals the correlation between magnetic order and interlay stacking order in the CrBr$_3$ flakes unambiguously. A tunable exchange bias effect is obtained in the mixed phase of FM and AFM states. This work will introduce new magnetic properties by controlling the stacking order, and sequence of 2D magnets, providing ample opportunities for their application in spintronic devices.

cond-mat.mtrl-sci↗

arXiv2023

Magnetically-dressed CrSBr exciton-polaritons in ultrastrong coupling regime

The strong coupling between photons and matter excitations such as excitons, phonons, and magnons is of central importance in the study of light-matter interactions. Bridging the flying and stationary quantum states, the strong light-matter coupling enables the coherent transmission, storage, and processing of quantum information, which is essential for building photonic quantum networks. Over the past few decades, exciton-polaritons have attracted substantial research interest due to their half-light-half-matter bosonic nature. Coupling exciton-polaritons with magnetic orders grants access to rich many-body phenomena, but has been limited by the availability of material systems that exhibit simultaneous exciton resonances and magnetic ordering. Here we report magnetically-dressed microcavity exciton-polaritons in the van der Waals antiferromagnetic (AFM) semiconductor CrSBr coupled to a Tamm plasmon microcavity. Angle-resolved spectroscopy reveals an exceptionally high exciton-polariton coupling strength attaining 169 meV, demonstrating ultrastrong coupling that persists up to room temperature. Temperature-dependent exciton-polariton spectroscopy senses the magnetic order change from AFM to paramagnetism in CrSBr, confirming its magnetic nature. By applying an out-of-plane magnetic field, an effective tuning of the polariton energy is further achieved while maintaining the ultrastrong exciton-photon coupling strength, which is attributed to the spin canting process that modulates the interlayer exciton interaction. Our work proposes a hybrid quantum platform enabled by robust opto-electronic-magnetic coupling, promising for quantum interconnects and transducers.

cond-mat.mtrl-sci↗

arXiv2022

Generative artificial intelligence-enabled dynamic detection of nicotine-related circuits

The identification of addiction-related circuits is critical for explaining addiction processes and developing addiction treatments. And models of functional addiction circuits developed from functional imaging are an effective tool for discovering and verifying addiction circuits. However, analyzing functional imaging data of addiction and detecting functional addiction circuits still have challenges. We have developed a data-driven and end-to-end generative artificial intelligence(AI) framework to address these difficulties. The framework integrates dynamic brain network modeling and novel network architecture networks architecture, including temporal graph Transformer and contrastive learning modules. A complete workflow is formed by our generative AI framework: the functional imaging data, from neurobiological experiments, and computational modeling, to end-to-end neural networks, is transformed into dynamic nicotine addiction-related circuits. It enables the detection of addiction-related brain circuits with dynamic properties and reveals the underlying mechanisms of addiction.

cs.AI↗