arXiv subjects

Zuzana Konopkova

Publications and source records attributed to Zuzana Konopkova.

9 recordsLinked to original sources

arXiv2026

Iron spin crossover in ferropericlase and its effect on lower-mantle thermal conductivity

Thermal conductivity of Earths lower mantle controls heat transfer across the core-mantle boundary (CMB) and strongly influences mantle convection. We report direct measurements of the thermal conductivity of single-crystal ferropericlase (Mg$_{1-x}$Fe$_x$O, $x = 0.09$-0.13), the second most abundant lower-mantle mineral, using optical laser flash and X-ray free-electron laser heating in diamond-anvil cells up to $\sim2200$~K and 130~GPa. These experiments provide the first conductivity data for ferropericlase at simultaneous lower-mantle pressures and temperatures. A marked reduction in conductivity between 60 and 100~GPa at $\sim1700$~K is consistent with the iron spin crossover. Combined with our previous results for Fe- and Fe,Al-bearing bridgmanite, the data define a lower-mantle conductivity profile that increases with pressure to $\sim10$~W\,m$^{-1}$\,K$^{-1}$ near the CMB, constraining mantle heat flux, plume buoyancy, and long-term geodynamic evolution.

physics.geo-ph↗

arXiv2025

High-Quality Ultra-Fast Total Scattering and Pair Distribution Function Data using an X-ray Free Electron Laser

High-quality total scattering data, a key tool for understanding atomic-scale structure in disordered materials, require stable instrumentation and access to high momentum transfers. This is now routine at dedicated synchrotron instrumentation using high-energy X-ray beams, but it is very challenging to measure a total scattering dataset in less than a few microseconds. This limits their effectiveness for capturing structural changes that occur at the much faster timescales of atomic motion. Current X-ray free-electron lasers (XFELs) provide femtosecond-pulsed X-ray beams with maximum energies of approximately 24 keV, giving the potential to measure total scattering and the attendant pair distribution functions (PDFs) on femtosecond timescales. Here, we show that this potential has been realised using the HED scientific instrument at the European XFEL and present normalised total scattering data for 0.35 Å-1 < Q < 16.6 Å-1 and their PDFs from a broad spectrum of materials, including crystalline, nanocrystalline and amorphous solids, liquids, and clusters in solution. We analyse the data using a variety of methods, including Rietveld refinement, small-box PDF refinement, joint reciprocal-real space refinement, cluster refinement, and Debye scattering analysis. The resolution function of the setup is also characterised. We conclusively show that high-quality data can be obtained from a single approximately 30 fs XFEL pulse. Our efforts not only significantly increase the existing maximum reported Q-range for an S(Q) measured at an XFEL but also mean that XFELs are now a viable X-ray source for the broad community of people using reciprocal space total scattering and PDF methods in their research.

cond-mat.mtrl-sci↗

arXiv2025

Observation of Body-Centered Cubic Iron above 200 Gigapascals

The crystallographic structure of iron under extreme conditions is a key benchmark for cutting-edge experimental and numerical methods. Moreover, it plays a crucial role in understanding planetary cores, as it significantly influences the interpretation of observational data and, consequently, insights into their internal structure and dynamics. However, even the structure of pure solid iron under the Earth's core conditions remains uncertain, with the commonly expected hexagonal close-packed structure energetically competitive with various cubic lattices. In this study, iron was compressed in a diamond anvil cell to above 200 GPa, and dynamically probed near the melting point using MHz frequency X-ray pulses from the European X-ray Free Electron Laser. The emergence of an additional diffraction line at high temperatures suggests the formation of an entropically stabilized bcc structure. Rapid heating and cooling cycles captured intermediate phases, offering new insights into iron's phase transformation paths. The appearance of the bcc phase near melting at extreme pressures challenges current understanding of the iron phase diagram under Earth's core conditions.

cond-mat.mtrl-sci↗

arXiv2024

Formation of high-aspect-ratio nanocavity in LiF crystal using a femtosecond of x-ray FEL pulse

Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed material. The plasma-generated shock wave with TPa-level pressure results in damage, melting and polymorphic transformations of any material, including transparent and non-transparent to conventional optical lasers. Moreover, cylindrical shocks can be utilized to obtain a considerable amount of exotic high-pressure polymorphs. Pressure wave propagation in LiF, radial material flow, formation of cracks and voids are analyzed via continuum and atomistic simulations revealing a sequence of processes leading to the final structure with the long cavity. Similar results can be produced with semiconductors and ceramics, which opens a new pathway for development of laser material processing with hard x-ray pulses.

physics.plasm-ph↗

arXiv2023

Ultra-fast yttrium hydride chemistry at high pressures via non-equilibrium states induced by x-ray free electron laser

Controlling the formation and stoichiometric content of desired phases of materials has become a central interest for the study of a variety of fields, notably high temperature superconductivity under extreme pressures. The further possibility of accessing metastable states by initiating reactions by x-ray triggered mechanisms over ultra-short timescales is enabled with the development of x-ray free electron lasers (XFEL). Utilizing the exceptionally high brilliance x-ray pulses from the EuXFEL, we report the synthesis of a previously unobserved yttrium hydride under high pressure, along with non-stoichiometric changes in hydrogen content as probed at a repetition rate of 4.5\,MHz using time-resolved x-ray diffraction. Exploiting non-equilibrium pathways we synthesize and characterize a hydride with yttrium cations in an \textit{A}15 structure type at 125\,GPa, predicted using crystal structure searches, with a hydrogen content between 4.0--5.75 hydrogens per cation, that is enthalpically metastable on the convex hull. We demonstrate a tailored approach to changing hydrogen content using changes in x-ray fluence that is not accessible using conventional synthesis methods, and reveals a new paradigm in metastable chemical physics.

cond-mat.mtrl-sci↗

arXiv2021

Ethane and methane at high pressures: structure and stability

We have performed a combined experimental and theoretical study of ethane and methane at high pressures up to 120 GPa at 300 K using x-ray diffraction and Raman spectroscopy and the USPEX ab-initio evolutionary structural search algorithm, respectively. For ethane, we have determined the crystallization point, for room temperature, at 2.7 GPa and also the low pressure crystal structure (Phase A). This crystal structure is orientationally disordered (plastic phase) and deviates from the known crystal structures for ethane at low temperatures. Moreover, a pressure induced phase transition has been identified, for the first time, at 13.6 GPa to a monoclinic phase B, the structure of which is solved based on a good agreement of the experimental results and theoretical predictions. For methane, our XRD measurements are in agreement with the previously reported high-pressure structures and EOS. We have determined the equations of state of ethane and methane, which provides a solid basis for the discussion of their relative stability at high pressures.

cond-mat.mtrl-sci↗

arXiv2017

Synthesis of Polar Ordered Oxynitride Perovskite

For decades, numerous attempts have been made to produce polar oxynitride perovskites, where some of the oxygen are replaced by nitrogen, but a polar ordered oxynitride has never been demonstrated. Caracas and Cohen studied possible ordered polar oxynitrides within density functional theory (DFT) and found a few candidates that were predicted to be insulating and at least metastable. YSiO2N stood out with huge predicted polarization and nonlinear optic coefficients. In this study, we demonstrate the synthesis of perovskite-structured YSiO2N by using a combination of a diamond anvil cell and in-situ laser heating technique. Subsequent in-situ X-ray diffraction, second harmonic generation, and Raman scattering measurements confirm that it is polar and a strong nonlinear optical material, with structure and properties similar to those predicted by DFT.

cond-mat.mtrl-sci↗

arXiv2014

Synthesis of ultra-incompressible sp3-hybridized carbon nitride

Search of materials with C-N composition hold a great promise in creating materials which would rival diamond in hardness due to the very strong and relatively low-ionic C-N bond. Early experimental and theoretical works on C-N compounds were based on structural similarity with binary A3B4 structural- types; however, the synthesis of C3N4 remains elusive. Here we explored an unbiased synthesis from the elemental materials at high pressures and temperatures. Using in situ synchrotron X-ray diffraction and Raman spectroscopy we demonstrate synthesis of highly incompressible Pnnm CN compound with sp3 hybridized carbon is synthesized above 55 GPa and 7000 K. This result is supported by first principles evolutionary search, which finds that Pnnm CN is the most stable compound above 10.9 GPa. On pressure release below 6 GPa the synthesized CN compound amorphizes reattaining its 1:1 stoichiometry as confirmed by Energy-Dispersive X-ray Spectroscopy. This work underscores the importance of understanding of novel high-pressure chemistry rules and it opens a new route for synthesis of superhard materials.

cond-mat.mtrl-sci↗

arXiv2013

Unexpected stable stoichiometries of sodium chlorides

Sodium chloride (NaCl), or rocksalt, is well characterized at ambient pressure. Due to the large electronegativity difference between Na and Cl atoms, it has highly ionic chemical bonding, with stoichiometry 1:1 dictated by charge balance, and B1-type crystal structure. Here, by combining theoretical predictions and diamond anvil cell experiments we show that new materials with different stoichiometries emerge at pressure as low as 20 GPa. Compounds such us Na3Cl, Na2Cl, Na3Cl2, NaCl3 and NaCl7 are theoretically stable and have unusual bonding and electronic properties. To test this prediction, at 55-80 GPa we synthesized cubic and orthorhombic NaCl3 at 55-70 GPa and 2D-metallic tetragonal Na3Cl. This proves that novel compounds, violating chemical intuition, can be thermodynamically stable even in simplest systems at non-ambient conditions.

cond-mat.mtrl-sci↗