Grain refinement in unalloyed tantalum structure deposited using Wire + Arc Additive Manufacture and vertical cold rolling
Components manufactured via Wire + Arc Additive Manufacturing are usually characterised by large columnar grains. This can be mitigated by introducing in-process cold-rolling; in fact, the associated local plastic deformation leads to a reduction of distortion and residual stresses, and to microstructural refinement. In this research, inter-pass rolling was applied with a load of 50 kN to a tantalum linear structure to assess its effectiveness in changing the grain structure from columnar to equiaxed, as well as in refining the grain size. An average grain size of 650 microns has been obtained after five cycles of inter-pass rolling and deposition. When the deformed layer was reheated during the subsequent deposition, recrystallisation occurred, leading to the growth of new strain-free finer equiaxed grains. The depth of the refined region has been characterised and correlated to the hardness profile developed after rolling. A reduction of porosity was also registered. Furthermore, a random texture was formed after rolling, which should result in isotropic mechanical properties. Wire + Arc Additive Manufacturing process demonstrated the ability to deposit sound refractory metal components and the possibility to improve the microstructure when coupled with cold inter-pass rolling.