Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1212.6222

Apodized phase mask coronagraphs for arbitrary apertures

Alexis Carlotti
View original source ↗Read source document ↗Export metadata ↓

Abstract

Phase masks coronagraphs can be seen as linear systems that spatially redistribute, in the pupil plane, the energy collected by the telescope. Most of the on-axis light must ideally be rejected outside the aperture to be blocked with a Lyot stop, while almost all off-axis light must go through it. The unobstructed circular apertures of off-axis telescopes make this possible but all major telescopes are however on-axis and the performance of these coronagraphs is dramatically reduced by the central obstruction. Their performance can be restored by using an additional optimally designed apodizer that changes the amplitude in the first pupil plane so that the on-axis light is rejected outside the obstructed aperture of the telescope. The numerical optimization model is built by maximizing the apodizer's transmission while setting constraints on the extremum values of the electric field that the Lyot stop does not block. The coronagraphic image is compared to what a non-apodized phase mask coronagraph provides and an analysis is made of the trade-offs that exist between the apodizer transmission and the Lyot stop properties. The existence of a solution and the mask transmission depend on the aperture and the Lyot stop geometries, and on the constraints that are set on the on-axis attenuation. The system throughput is a concave function of the Lyot stop transmission. In the case of a VLT-like aperture, apodizers with a transmission of 0.16 to 0.92 associated with a four-quadrant phase mask provide contrast as low as a few 1e-10 at 1 lambda/D from the star. The system's maximum throughput is 0.64, for an apodizer with an 0.88 transmission and a Lyot stop with a 0.69 transmission. Optimizing apodizers for a vortex phase mask requires computation times much longer than in the previous case, and no result is presented for this mask.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

Alexis Carlotti. 2012-12-26. Apodized phase mask coronagraphs for arbitrary apertures. https://doi.org/10.1051/0004-6361%2F201220661

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗