Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1309.5392

Design optimization of mode-matched bulk-mode piezoelectric micro-gyroscopes through modal analysis

Xiaosheng WU·Wenyuan Chen·Abdolvand Reza
View original source ↗Read source document ↗Export metadata ↓

Abstract

Bulk piezoelectric micro-gyroscope is a miniaturized inertial sensor that uses a differential thickness-shear bulk mode of a PZT block as the drive mode of the gyroscope. In the paper, a second differential thickness-extensional mode is identified for the sense mode and mode-matching is proposed for the first time by proper design of the device geomtries. Through finite element modal analysis, the frequencies of drive mode and sense mode are obtained when the length of the PZT block varies from 4.8mm to 5.6mm and the width of the PZT block varies from 3.0mm to 4.0mm. Using a fitting method, the empirical formulae with an excellent fit are induced to predict the influence of the length and the width of the PZT block on the drive and sense mode frequencies. Based on these empirical formulae, the mode-matching equations are introduced. The analysis results show that for a given thickness of the PZT block, the effect of the width on the drive mode frequency is prominant. Conversly, the effect of length on the sense mode frequency is dominant. The resonance frequencies, kinetic energy ratios, scale factors of gyroscope are compared to evaluate the mode quality. The results show that the kinetic energy in y-axis direction of the drive mode and the kinetic energy in z-axis direction of the sense mode increase with the thickness of the PZT block, and consequently the scale factor of the gyroscope increases. For a constant thickness of the PZT block the scale factor will decrease as the length increases. Through design optimization we present a 20 times improvement in the scale factor of the mode-matched gyroscope. Given the thickness of PZT block, the length and the width will be determined by the mode-matching equations mentioned. Generally, the analysis suggests that the resolution of the gyroscope improves by increasing the thickness PZT block.

Explore related subjects

physics.ins-detphysics.optics

Keep this discovery

BibTeXRIS

Xiaosheng WU, Wenyuan Chen, Abdolvand Reza. 2013-09-20. Design optimization of mode-matched bulk-mode piezoelectric micro-gyroscopes through modal analysis. https://arxiv.org/abs/1309.5392

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗