SearcharxivSearch

arXiv · 1603.09380

Decreasing groundwater quality at Cisadane riverbanks: groundwater-surface water approach

Abstract

The decreasing of groundwater quality has been the major issue in Tangerang area. One of the key process is the interaction between groundwater and Cisadane river water, which flows over volcanic deposits of Bojongmanik Fm, Genteng Fm, Tuf Banten, and Alluvial Fan. The objective of this study is to unravel such interactions based on the potentiometric mapping in the riverbank. We had 60 stop sites along the riverbank for groundwater and river water level observations, and chemical measurements (TDS, EC, temp, and pH). Three river water gauge were also analyzed to see the fluctuations. We identified three types of hydrodynamic relationships with fairly low flow gradients: effluent flow at Segmen I (Kranggan - Batuceper) with 0.2-0.25 gradient, perched flow at Segmen II (Batuceper-Kalibaru) with gradient 0.2-0.25, and influent flow at Segmen III (Kalibaru-Tanjungburung) with gradient 0.15-0.20. Such low flow gradient is controlled by the moderate to low morphological slope in the area. The gaining and losing stream model were also supported by the river water fluctuation data. TDS and EC readings increased more than 40$\%$ from upstream to downstream. At some points the both measurements were two times higher than the permissible limits, along with the drops of pH values at those areas. This study shows the very close interaction between Cisadane river water and groundwater in the riverbank. Therefore the authorities need to be managed the areas with a very strict regulations related to the small and large scale industries located near by the river.

Explore related subjects

Keep this discovery

BibTeXRIS

Dasapta Erwin Irawan, Deny Juanda Puradimaja, Defitri Yeni, Arno Adi Kuntoro, Miga Magenika Julian. 2016-03-25. Decreasing groundwater quality at Cisadane riverbanks: groundwater-surface water approach. https://arxiv.org/abs/1603.09380

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Holistic law of aftershocks

The paper is devoted to the phenomenological theory of aftershocks occurring in the source of a tectonic earthquake following the main shock. The theory was developed by the author jointly with A.D. Zavyalov and O.D. Zotov during the course of a long-term study of aftershocks. The theory is based on the concepts of source deactivation and the source's proper time. The holistic law governing the decay of aftershock activity over proper time follows from the theory. The damping decrement is equal to the source deactivation coefficient. The main focus of this paper is the analysis of the logical structure of the theory. The paper also contains a brief description of the experimental results obtained using the theory. Keywords: earthquake source, aftershocks, Omori's law, Utsu's law, deactivation coefficient, proper time, underground clock, foreshock convergence, aftershock divergence.

physics.geo-ph

Bayesian deep learning integration of geophysical and drilling data for 3D prediction of copper mineralization and drill targeting: a case study from the Kogodai prospect, Rudny Altai

Exploration drill targeting in structurally complex terranes is hindered by sparse sampling, heterogeneous datasets, and the ambiguity of geophysical inversions. Here, we present an uncertainty-aware 3D workflow for the acceleration of time-to-discovery in brownfield explorations and apply it to the Kogodai prospect in the Rudny Altai metallogenic province. We jointly analyse existing drilling and geophysical data in a comprehensive approach, revealing hidden patterns in already available data. Drillholes and trenches were desurveyed to a common 3D reference frame, and assays were composited to a consistent spatial support to facilitate joint modelling with geophysical inputs. We develop Bayesian deep-learning models to predict 3D fields of Cu grade together with chargeability and apparent resistivity while quantifying epistemic uncertainty via Monte Carlo sampling. The original contribution of this work is to treat the problem not as pointwise regression between co-located observations, but as joint learning of spatially continuous 3D fields from sparse, heterogeneous exploration evidence. The resulting 3D predictions delineate a principal mineralized trend and several localized candidate zones that coincide with elevated induced polarization (IP) responses, while uncertainty mapping highlights where predictions are robust versus where additional drilling would be most informative. The continuous Cu-grade field can also be thresholded to produce binary prospectivity maps, allowing the sensitivity of target delineation to the chosen cutoff to be evaluated. The outputs are intended for qualitative interpretation and risk-aware drill targeting rather than resource estimation, and we discuss key limitations arising from incomplete provenance metadata for geophysical products and heterogeneity of historical sampling.

physics.geo-ph

PyelogP: Automated Energy-Based Determination of Preconsolidation Pressure in Clay Deposits

Estimating the preconsolidation pressure ($\sigma'_p$) from one-dimensional consolidation (oedometer) tests is critical in geotechnical engineering for settlement analysis. Traditional graphical methods, such as the Casagrande procedure, may introduce uncertainties, particularly when interpreting rounded $e$-log($P$) curves typical of disturbed specimens of soft clays and silt deposits. This paper introduces PyelogP, an open-source Python library designed to calculate $\sigma'_p$ using the strain-energy method proposed by Becker et al. (1987) as an automated and reproducible alternative. The algorithm combines natural cubic spline interpolation, knee-point detection via the Kneedle algorithm, and split-point linear regression within the work-pressure space. Physically informed thresholds, including overconsolidation ratio limits and second-derivative maxima (${d^2 e}/{d(\log \sigma')^2}$), are incorporated to establish pre-yield and post-yield fitting boundaries. The performance of PyelogP is evaluated against a suite of 22 experimental consolidation datasets covering various clay deposits, including Saint-Alban clay and San Francisco Old Bay Clay. The results demonstrate strong agreement with the published values ($R^2$ = 0.912, RMSE = 0.374, MBE = -0.080), while the $O(N^2)$ algorithm requires only a few milliseconds per curve for typical oedometer datasets and less than 150 milliseconds for the largest datasets.

physics.geo-ph