Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1605.03037

Application of USNO-B1.0 towards selecting objects with displaced blue and red components

Joel S. Jayson
View original source ↗Read source document ↗Export metadata ↓

Abstract

We have conducted a feasibility study to determine the effectiveness of using USNO-B1.0 data to preferentially detect objects with displaced red and blue components. A procedure was developed to search catalogue entries for such objects, which include M dwarfs paired with white dwarfs or with earlier main-sequence stars, and galaxies with asymmetric colour distributions. Residual differences between red and blue and infrared and blue scanned emulsion images define vectors, which, when appropriately aligned and of sufficient length, signal potential candidates. Test sample sets were analysed to evaluate the effective discrimination of the technique. Over 91,000 USNO-B1.0 catalogue entries at points throughout the celestial sphere were then filtered for acceptable combinations of entry observations and magnitudes and the resulting total of about 17,000 entries was winnowed down to a little more than 200 objects of interest. These were screened by visual examination of photo images to a final total of 146 candidates. About one quarter of these candidates coincide with SDSS data. Those constituents fall into two groups, single and paired objects. SDSS identified several galaxies in the first group. Regarding the second group, at least half of its members were tentatively identified as main-sequence pairs, the greater portion being of widely separated spectral types. Two white dwarf--main-sequence pairs were also identified. Most importantly, the vectors formed from USNO-B1.0 residuals were in alignment with corresponding SDSS pair position angles, thereby supporting this work`s central thesis.

Explore related subjects

astro-ph.IMastro-ph.GA

Keep this discovery

BibTeXRIS

Joel S. Jayson. 2016-05-10. Application of USNO-B1.0 towards selecting objects with displaced blue and red components. https://doi.org/10.1093/mnras/stv2934

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗