Local projection stabilized finite element modeling of viscoelastic two-phase flows

Jagannath Venkatesan; Sashikumaar Ganesan

Home/Archive/arXiv

arXiv · 1902.06466

Local projection stabilized finite element modeling of viscoelastic two-phase flows

Jagannath Venkatesan·Sashikumaar Ganesan

View original source ↗Read source document ↗Export metadata ↓

Abstract

A three-field local projection stabilized finite element method is developed for computations of a 3D-axisymmetric buoyancy driven bubble rising in a liquid column in which either the bubble or the liquid column can be viscoelastic. The two-phase flow is described by the time-dependent incompressible Navier--Stokes equations, whereas the viscoelasticity is modeled by the Giesekus constitutive equation in a time-dependent domain. The arbitrary Lagrangian Eulerian~(ALE) formulation with finite elements is used to solve the governing equations in the time-dependent domain. The interface-resolved moving meshes in ALE allows to incorporate the interfacial tension force and jumps in the material parameters accurately. An one-level Local Projection Stabilization~(LPS), which is based on an enriched approximation space and a discontinuous projection space, where both spaces are defined on a same mesh is used to stabilize the model equations. The stabilized numerical scheme allows us to use equal order interpolation spaces for the velocity and the viscoelastic stress, whereas inf-sup stable finite elements are used for the velocity and the pressure. A comprehensive numerical investigation is performed for a Newtonian bubble rising in a viscoelastic fluid and a viscoelastic bubble rising in a Newtonian fluid. The influence of the viscosity ratio, Newtonian solvent ratio, Giesekus mobility factor and the E\"{o}tv\"{o}s number on the bubble dynamics are analyzed. The numerical study shows that a Newtonian bubble rising in a viscoelastic fluid experiences an extended trailing edge with a cusp-like shape and also exhibits the negative wake phenomena. However, a viscoelastic bubble rising in a Newtonian fluid develops an indentation around the rear stagnation point with a dimpled shape.

Explore related subjects

physics.flu-dyn physics.comp-ph

Keep this discovery

BibTeX RIS

Jagannath Venkatesan, Sashikumaar Ganesan. 2019-02-18. Local projection stabilized finite element modeling of viscoelastic two-phase flows. https://arxiv.org/abs/1902.06466

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗