Searcharxiv⌕ Search

arXiv subjects

Sashikumaar Ganesan

Publications and source records attributed to Sashikumaar Ganesan.

17 recordsLinked to original sources

Improving hp-Variational Physics-Informed Neural Networks for Steady-State Convection-Dominated Problems

This paper proposes and studies two extensions of applying hp-variational physics-informed neural networks, more precisely the FastVPINNs framework, to convection-dominated convection-diffusion-reaction problems. First, a term in the spirit of a SUPG stabilization is included in the loss functional and a network architecture is proposed that predicts spatially varying stabilization parameters. Having observed that the selection of the indicator function in hard-constrained Dirichlet boundary conditions has a big impact on the accuracy of the computed solutions, the second novelty is the proposal of a network architecture that learns good parameters for a class of indicator functions. Numerical studies show that both proposals lead to noticeably more accurate results than approaches that can be found in the literature.

math.NA↗

An efficient hp-Variational PINNs framework for incompressible Navier-Stokes equations

Physics-informed neural networks (PINNs) are able to solve partial differential equations (PDEs) by incorporating the residuals of the PDEs into their loss functions. Variational Physics-Informed Neural Networks (VPINNs) and hp-VPINNs use the variational form of the PDE residuals in their loss function. Although hp-VPINNs have shown promise over traditional PINNs, they suffer from higher training times and lack a framework capable of handling complex geometries, which limits their application to more complex PDEs. As such, hp-VPINNs have not been applied in solving the Navier-Stokes equations, amongst other problems in CFD, thus far. FastVPINNs was introduced to address these challenges by incorporating tensor-based loss computations, significantly improving the training efficiency. Moreover, by using the bilinear transformation, the FastVPINNs framework was able to solve PDEs on complex geometries. In the present work, we extend the FastVPINNs framework to vector-valued problems, with a particular focus on solving the incompressible Navier-Stokes equations for two-dimensional forward and inverse problems, including problems such as the lid-driven cavity flow, the Kovasznay flow, and flow past a backward-facing step for Reynolds numbers up to 200. Our results demonstrate a 2x improvement in training time while maintaining the same order of accuracy compared to PINNs algorithms documented in the literature. We further showcase the framework's efficiency in solving inverse problems for the incompressible Navier-Stokes equations by accurately identifying the Reynolds number of the underlying flow. Additionally, the framework's ability to handle complex geometries highlights its potential for broader applications in computational fluid dynamics. This implementation opens new avenues for research on hp-VPINNs, potentially extending their applicability to more complex problems.

physics.flu-dyn↗

FastVPINNs: Tensor-Driven Acceleration of VPINNs for Complex Geometries

Variational Physics-Informed Neural Networks (VPINNs) utilize a variational loss function to solve partial differential equations, mirroring Finite Element Analysis techniques. Traditional hp-VPINNs, while effective for high-frequency problems, are computationally intensive and scale poorly with increasing element counts, limiting their use in complex geometries. This work introduces FastVPINNs, a tensor-based advancement that significantly reduces computational overhead and improves scalability. Using optimized tensor operations, FastVPINNs achieve a 100-fold reduction in the median training time per epoch compared to traditional hp-VPINNs. With proper choice of hyperparameters, FastVPINNs surpass conventional PINNs in both speed and accuracy, especially in problems with high-frequency solutions. Demonstrated effectiveness in solving inverse problems on complex domains underscores FastVPINNs' potential for widespread application in scientific and engineering challenges, opening new avenues for practical implementations in scientific machine learning.

cs.LG↗

AI-augmented stabilized finite element method

An artificial intelligence-augmented Streamline Upwind/Petrov-Galerkin finite element scheme (AiStab-FEM) is proposed for solving singularly perturbed partial differential equations. In particular, an artificial neural network framework is proposed to predict optimal values for the stabilization parameter. The neural network is trained by minimizing a physics-informed cost function, where the equation's mesh and physical parameters are used as input features. Further, the predicted stabilization parameter is normalized with the gradient of the Galerkin solution to treat the boundary/interior layer region adequately. The proposed approach suppresses the undershoots and overshoots in the stabilized finite element solution and outperforms the existing neural network-based partial differential equation solvers such as Physics-Informed Neural Networks and Variational Neural Networks.

math.AP↗

An Operator-Splitting Finite Element Method for the Numerical Solution of Radiative Transfer Equation

An operator-splitting finite element scheme for the time-dependent, high-dimensional radiative transfer equation is presented in this paper. The streamline upwind Petrov-Galerkin finite element method and discontinuous Galerkin finite element method are used for the spatial-angular discretization of the radiative transfer equation, whereas the implicit backward Euler scheme is used for temporal discretization. Error analysis of the proposed numerical scheme for the fully discrete radiative transfer equation is presented. The stability and convergence estimates for the fully discrete problem are derived. Moreover, an operator-splitting algorithm for numerical simulation of high-dimensional equations is also presented. The validation of the derived estimates and implementation is demonstrated with appropriate numerical experiments.

math.NA↗

Generalized local projection stabilized finite element method for advection-reaction problems

A priori analysis for a generalized local projection stabilized finite element approximations for the solution of an advection-reaction equation is presented in this article. The stability and a priori error estimates are established for both the conforming and the nonconforming (Crouzeix-Raviart) approximations with respect to the local projection streamline derivative norm. Finally, the validation of the proposed stabilization scheme and verification of the the derived estimates are presented with appropriate numerical experiments.

math.NA↗

An overlapping local projection stabilization for Galerkin approximations of Darcy and Stokes problems

A priori analysis for a generalized local projection stabilized conforming finite element approximation of Darcy flow and Stokes problems is presented in this paper. A first-order conforming P1 finite element space is used to approximate both the velocity and the pressure. It is shown that the stabilized discrete bilinear form satisfy the inf-sup condition with respect to a generalized local projection norm. Moreover, a priori error estimates are derived for both problems. Finally, the validation of the proposed stabilization scheme is demonstrated with appropriate numerical examples.

math.NA↗

Spatio-temporal predictive modeling framework for infectious disease spread

A novel predictive modeling framework for the spread of infectious diseases using high dimensional partial differential equations is developed and implemented. A scalar function representing the infected population is defined on a high-dimensional space and its evolution over all directions is described by a population balance equation (PBE). New infections are introduced among the susceptible population from non-quarantined infected population based on their interaction, adherence to distancing norms, hygiene levels and any other societal interventions. Moreover, recovery, death, immunity and all aforementioned parameters are modeled on the high-dimensional space. To epitomize the capabilities and features of the above framework, prognostic estimates of Covid-19 spread using a six-dimensional (time, 2D space, infection severity, duration of infection, and population age) PBE is presented. Further, scenario analysis for different policy interventions and population behavior is presented, throwing more insights into the spatio-temporal spread of infections across disease age, intensity and age of population. These insights could be used for science-informed policy planning.

q-bio.PE↗

SParSH-AMG: A library for hybrid CPU-GPU algebraic multigrid and preconditioned iterative methods

Hybrid CPU-GPU algorithms for Algebraic Multigrid methods (AMG) to efficiently utilize both CPU and GPU resources are presented. In particular, hybrid AMG framework focusing on minimal utilization of GPU memory with performance on par with GPU-only implementations is developed. The hybrid AMG framework can be tuned to operate at a significantly lower GPU-memory, consequently, enables to solve large algebraic systems. Combining the hybrid AMG framework as a preconditioner with Krylov Subspace solvers like Conjugate Gradient, BiCG methods provides a solver stack to solve a large class of problems. The performance of the proposed hybrid AMG framework is analysed for an array of matrices with different properties and size. Further, the performance of CPU-GPU algorithms are compared with the GPU-only implementations to illustrate the significantly lower memory requirements.

cs.MS↗

Stability analysis and error estimates of a projection based variational multiscale method for Oseen equations in moving domains

Stability and error estimate for the Oseen equations in a projection based variational setup has been derived in this paper. The use of Geometric Conservation Law (GCL) provides unconditional stability whereas without using GCL we have a conditional scheme which imposes restriction on the time step. Further using the stability results derived, we make the first order error estimate using a backward Euler time discretization scheme.

math.AP↗

Local projection stabilized finite element modeling of viscoelastic two-phase flows

A three-field local projection stabilized finite element method is developed for computations of a 3D-axisymmetric buoyancy driven bubble rising in a liquid column in which either the bubble or the liquid column can be viscoelastic. The two-phase flow is described by the time-dependent incompressible Navier--Stokes equations, whereas the viscoelasticity is modeled by the Giesekus constitutive equation in a time-dependent domain. The arbitrary Lagrangian Eulerian~(ALE) formulation with finite elements is used to solve the governing equations in the time-dependent domain. The interface-resolved moving meshes in ALE allows to incorporate the interfacial tension force and jumps in the material parameters accurately. An one-level Local Projection Stabilization~(LPS), which is based on an enriched approximation space and a discontinuous projection space, where both spaces are defined on a same mesh is used to stabilize the model equations. The stabilized numerical scheme allows us to use equal order interpolation spaces for the velocity and the viscoelastic stress, whereas inf-sup stable finite elements are used for the velocity and the pressure. A comprehensive numerical investigation is performed for a Newtonian bubble rising in a viscoelastic fluid and a viscoelastic bubble rising in a Newtonian fluid. The influence of the viscosity ratio, Newtonian solvent ratio, Giesekus mobility factor and the Eötvös number on the bubble dynamics are analyzed. The numerical study shows that a Newtonian bubble rising in a viscoelastic fluid experiences an extended trailing edge with a cusp-like shape and also exhibits the negative wake phenomena. However, a viscoelastic bubble rising in a Newtonian fluid develops an indentation around the rear stagnation point with a dimpled shape.

physics.flu-dyn↗

ParMooN - a modernized program package based on mapped finite elements

{\sc ParMooN} is a program package for the numerical solution of elliptic and parabolic partial differential equations. It inherits the distinct features of its predecessor {\sc MooNMD} \cite{JM04}: strict decoupling of geometry and finite element spaces, implementation of mapped finite elements as their definition can be found in textbooks, and a geometric multigrid preconditioner with the option to use different finite element spaces on different levels of the multigrid hierarchy. After having presented some thoughts about in-house research codes, this paper focuses on aspects of the parallelization for a distributed memory environment, which is the main novelty of {\sc ParMooN}. Numerical studies, performed on compute servers, assess the efficiency of the parallelized geometric multigrid preconditioner in comparison with some parallel solvers that are available in the library {\sc PETSc}. The results of these studies give a first indication whether the cumbersome implementation of the parallelized geometric multigrid method was worthwhile or not.

math.NA↗

An object oriented parallel finite element scheme for computations of PDEs: Design and implementation

Parallel finite element algorithms based on object-oriented concepts are presented. Moreover, the design and implementation of a data structure proposed are utilized in realizing a parallel geometric multigrid method. The ParFEMapper and the ParFECommunicator are the key components of the data structure in the proposed parallel scheme. These classes are constructed based on the type of finite elements (continuous or nonconforming or discontinuous) used. The proposed solver is compared with the open source direct solvers, MUMPS and PasTiX. Further, the performance of the parallel multigrid solver is analyzed up to 1080 processors. The solver shows a very good speedup up to 960 processors and the problem size has to be increased in order to maintain the good speedup when the number of processors are increased further. As a result, the parallel solver is able to handle large scale problems on massively parallel supercomputers. The proposed parallel finite element algorithms and multigrid solver are implemented in our in-house package ParMooN.

cs.MS↗

ALE-SUPG finite element method for convection-diffusion problems in time-dependent domains: Non-conservative form

Stability estimates for Streamline Upwind Petrov-Galerkin (SUPG) finite element method with different time integration schemes for the solution of a scalar transient convection-diffusion-reaction equation in a time-dependent domain are derived. The deformation of the domain is handled with the arbitrary Lagrangian-Eulerian (ALE) approach. In particular, the non-conservative form of the ALE scheme is considered. The implicit Euler, the Crank-Nicolson, and the backward-difference~(BDF-2) methods are used for temporal discretization. It is shown that the stability of the semi-discrete (continuous in time) ALE-SUPG equation is independent of the mesh velocity, whereas the stability of the fully discrete problem is only conditionally stable. The theoretical considerations are illustrated by a numerical example. Further, the dependence of numerical solution on the choice of stabilization parameter $δ_k$ is also presented.

math.NA↗

On the Navier-slip boundary condition for computations of impinging droplets

A mesh-dependent relation for the slip number in the Navier-slip with friction boundary condition for computations of impinging droplets with sharp interface methods is proposed. The relation is obtained as a function of Reynolds number, Weber number and the mesh size. The proposed relation is validated for several test cases by comparing the numerically obtained wetting diameter with the experimental results. Further, the computationally obtained maximum wetting diameter using the proposed slip relation is verified with the theoretical predictions. The relative error between the computationally obtained maximum wetting diameter and the theoretical predictions is less than 10 % for impinging droplet on a hydrophilic surface, and the error increases in the case of hydrophobic surface.

physics.flu-dyn↗

ALE-SUPG finite element method for convection-diffusion problems in time-dependent domains: Conservative form

A Streamline Upwind Petrov-Galerkin (SUPG) finite element method for transient convection-diffusion-reaction equation in time-dependent domains is proposed. In particular, a convection dominated transient scalar problem is considered. The time-dependent domain is handled by the arbitrary Lagrangian-Eulerian (ALE) approach, whereas the SUPG finite element method is used for the spatial discretization. Further, the first order backward Euler and the second order Crank-Nicolson methods are used for the temporal discretization. It is shown that the stability of the semidiscrete (continuous in time) conservative ALE-SUPG equation is independent of the mesh velocity, whereas the stability of the fully discrete problem is unconditionally stable for implicit Euler method and is only conditionally stable for Crank-Nicolson time discretization. Numerical results are presented to show the influence of the SUPG stabilization parameter in a time-dependent domain. Further, the proposed numerical scheme is applied to a boundary/layer problem in a time-dependent domain.

math.NA↗

Computation of impinging droplet with soluble surfactants and dynamic contact angle

An arbitrary Lagrangian--Eulerian (ALE) finite element scheme for computations of soluble surfactant droplet impingement on a horizontal surface is presented. The numerical scheme solves the time-dependent Navier--Stokes equations for the fluid flow, scalar convection-diffusion equation for the surfactant transport in the bulk phase, and simultaneously, surface evolution equations for the surfactants on the free surface and on the liquid-solid interface. The effects of surfactants on the flow dynamics are included into the model through the surfactant-dependent surface tension and dynamic contact angle. In particular, the dynamic contact angle $(θ_d)$ of the droplet is defined in terms of the surfactant concentration at the contact line and the equilibrium contact angle $(θ_e^0)$ of the clean surface using the nonlinear equation of state for surface tension. Further, the surface forces are included in the model as the surface divergence of the surface stress tensor that allows to incorporate the Marangoni effects without calculating the surface gradient of the surfactant concentration on the free surface. In addition to a mesh convergence study and validation of the numerical results with experiments, the effects of adsorption and desorption surfactant coefficients on the flow dynamics in wetting, partially wetting and non-wetting droplets are studied in detail. It is observed that the effect of surfactants are more in wetting droplets than in the non-wetting droplets. Further, the presence of surfactants at the contact line reduces the equilibrium contact angle further when $ θ_e^0 $ is less than $90^\circ$, and increases it further when $ θ_e^0 $ is greater than $90^\circ$. The presence of surfactants has no effect on the contact angle, when $θ_e^0 =90^\circ$. The numerical study clearly demonstrates that the surfactant-dependent contact angle ...

physics.flu-dyn↗