Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1903.10021

Effect of mounting strut and cavitator shape on the ventilation demand for ventilated supercavitation

Siyao Shao·Arun Balakrishna·Kyungduck Yoon·Jiaqi Li·Yun Liu·Jiarong Hong
View original source ↗Read source document ↗Export metadata ↓

Abstract

The present work reports behaviors regarding the formation and collapse of a ventilated supercavity while varying the cavitator shapes, including triangle, disk, and cone and varying mounting struts. Three cavitators with the same frontal area are fabricated with 3D printing and mounted on a forward facing model (FFM). The ventilation requirements to generate (C_Qf) and sustain (C_Qc) a supercavity are tested over a wide range of Froude number (Fr) for each cavitator and compared with backward facing model(BFM). Compared to the triangle and disk cavitators, the cone-shaped cavitator requires the least amount of air to generate a supercavity in nearly all of the tested flow regime except very high Fr. The C_Qc of disk FFM is lower than that of its BFM counterpart at small Fr and exceeds the BFM C_Qc with further increase of Fr. The cone cavitator has the smallest C_Qc among all the cavitators across the range of Fr in our experiments. Simultaneous internal pressure and cavity dimension measurements are conducted to elucidate the cavity sustenance behaviors. The cone-generated cavity yields a significantly smaller maximum diameter and a shorter half-length. Cavity geometric information and cavity pressure measurements with high-speed imaging of re-entrant jet are employed to estimate the re-entrant jet momentum under different Fr for disk and cone cavitators. The estimated re-entrant jet momentum shows reasonable match with the ventilation air momentum under C_Qc in lower Fr for both cavitator cases, with the disk cavitator case yielding significantly stronger re-entrant jet, providing support to the re-entrant jet mechanism governing on the cavity collapse. Our study sheds some light on the cavitator design and ventilation strategy for a supercavitating vehicle in practice.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Siyao Shao, Arun Balakrishna, Kyungduck Yoon, Jiaqi Li, Yun Liu, Jiarong Hong. 2019-03-24. Effect of mounting strut and cavitator shape on the ventilation demand for ventilated supercavitation. https://arxiv.org/abs/1903.10021

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗