SearcharxivSearch

arXiv · 1907.06442

A convolutional neural network approach for reconstructing polarization information of photoelectric X-ray polarimeters

Abstract

This paper presents a data processing algorithm with machine learning for polarization extraction and event selection applied to photoelectron track images taken with X-ray polarimeters. The method uses a convolutional neural network (CNN) classification to predict the azimuthal angle and 2-D position of the initial photoelectron emission from a 2-D track image projected along the X-ray incident direction. Two CNN models are demonstrated with data sets generated by a Monte Carlo simulation: one has a commonly used loss function calculated by the cross entropy and the other has an additional loss term to penalize nonuniformity for an unpolarized modulation curve based on the $H$-test, which is used for periodic signal search in X-ray/$γ$-ray astronomy. The modulation curve calculated by the former model with unpolarized data has several irregular features, which can be canceled out by unfolding the angular response or simulating the detector rotation. On the other hand, the latter model can predict a flat modulation curve with a residual systematic modulation down to $\lesssim1$%. Both models show almost the same modulation factors and position accuracy of less than 2 pixel (or 240 $μ$m) for all four test energies of 2.7, 4.5, 6.4, and 8.0 keV. In addition, event selection is performed based on probabilities from the CNN to maximize the polarization sensitivity considering a trade-off between the modulation factor and signal acceptance. The developed method with machine learning improves the polarization sensitivity by 10-20%, compared to that determined with the image moment method developed previously.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Takao Kitaguchi, Kevin Black, Teruaki Enoto, Asami Hayato, Joanne E. Hill, Wataru B. Iwakiri, Philip Kaaret, Tsunefumi Mizuno, Toru Tamagawa. 2019-07-15. A convolutional neural network approach for reconstructing polarization information of photoelectric X-ray polarimeters. https://doi.org/10.1016/j.nima.2019.162389

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM