SearcharxivSearch

arXiv · 2010.16246

MSS: a new way for high energy-resolution on any accelerator when using magnetic spectrometers

Abstract

An innovative approach: MSS - the Method of Spectra Superposition for high energy-resolution (Delta-E) studies on any accelerator of nuclear reactions at fixed targets by magnetic spectrometers, has been invented. For thin targets MSS provides a Delta-E which depends only on the detector's energy-resolution. The MSS can bring huge benefits to experiments with fixed targets at all types of accelerators and also on colliders. The MSS was used to get precise data with a Delta-E = 10 keV in (p,12C) elastic scattering for the energy region Ep 16 - 19.5 MeV at cyclotron U-150 of INP Ulugbek (Tashkent, AS of Uzbekistan) with a beam energy spread of about 200 keV. The proton energy control was performed with a 20-step Energy Moderator which provides Ep interval of 3.5 MeV without any energy-readjustment of cyclotron and all the ion optics of a 41-meter-long beam pipe. A multichannel Magnetic Spectrograph (Apelsin) was used as the nuclear reaction products detector. The particle-products were detected on focal planes of Apelsin by specially designed Coordinate-sensitive gas MWPCs with two particle counters in coincidence. The acquisition system was based on IBM PC online with a fast CAMAC branch custom-designed at PNPI (St-Petersburg INP, USSR) together with fast TDC modules and other fast electronics providing immediate selection and accumulation of events from the MWPCs. The Apelsin magnetic field was stabilized to 3 ppm by NMR-monitor system The obtained, with statistical error about 6%, excitation function (EF) of (p, 12C), with a resonance reach structure, is in precise agreement with thresholds and levels data [15-18].

Explore related subjects

Keep this discovery

BibTeXRIS

A. Gafarov. 2020-10-30. MSS: a new way for high energy-resolution on any accelerator when using magnetic spectrometers. https://arxiv.org/abs/2010.16246

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det