Yaw Stability Control System Development and Implementation for a Fully Electric Vehicle

Kerim Kahraman; Mutlu Senturk; Mumin Tolga Emirler; Ismail Meric Can Uygan; Bilin Aksun-Guvenc; Levent Guvenc; Baris Efendioglu

arXiv · 2012.04719

Yaw Stability Control System Development and Implementation for a Fully Electric Vehicle

Kerim Kahraman·Mutlu Senturk·Mumin Tolga Emirler·Ismail Meric Can Uygan·Bilin Aksun-Guvenc·Levent Guvenc·Baris Efendioglu

View original source ↗Read source document ↗Export metadata ↓

Abstract

There is growing interest in fully electric vehicles in the automotive industry as it becomes increasingly more difficult to meet new and upcoming emission regulations based on internal combustion engines. Fully electric vehicles do not have an internal combustion engine. Hence, drive torque change for a traction control system and for a yaw stability control system has to be through the electric motor used for traction. The regenerative braking capability of fully electric vehicles has to be taken into account in designing braking controllers like ABS and yaw stability control through differential braking. Fully electric vehicles are usually lighter vehicles with different dynamic characteristics than that of their predecessors using internal combustion engines. As such, their yaw stability control systems have to be re-designed and tested. This paper reports the initial results of ongoing work on yaw stability controller design for a fully electric vehicle. Two different implementations on a research prototype fully electric light commercial vehicle are considered. The first implementation uses the production yaw stability control system in the internal combustion engine powered conventional vehicle. The drive torque change commands from the production ECU are read, modified and sent to the electric motor driver in trying to mimic the conventional vehicle. The differential braking commands are the same as in the conventional vehicle. In the second implementation, a generic yaw stability control system that calculates and issues its own drive torque change commands and differential braking commands is designed and implemented. Offline simulations on a validated model and a hardware-in-the-loop simulation system are used in designing the yaw stability control system.

Explore related subjects

eess.SY cs.SY

Keep this discovery

BibTeX RIS

Kerim Kahraman, Mutlu Senturk, Mumin Tolga Emirler, Ismail Meric Can Uygan, Bilin Aksun-Guvenc, Levent Guvenc, Baris Efendioglu. 2020-12-08. Yaw Stability Control System Development and Implementation for a Fully Electric Vehicle. https://arxiv.org/abs/2012.04719

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Structured Stochastic Representations of Integrated Dynamic Strategies

Dynamic allocation decisions couple present resource use to evolving internal conditions, delayed returns, and future costs. We represent this interaction by four probability localizations linked through regime-indexed, graph-constrained column-stochastic operators. Pre-action state or context selects a locally affine model, while action-dependent changes update subsequent regimes, yielding a causal switched representation of nonlinear evolution. We characterize operator identifiability relative to the graph, the stochastic constraints, and the sampled embedding, separating coefficient recovery from predictive equivalence on the decision domain. Decision making is then formulated through implementable return--cost acceptability regions. Finite-horizon error propagation supplies conservative classification margins, and simultaneous intervals distinguish model-relative near-optimality from certified $\epsilon$-optimality over a declared finite policy class. Regime-indexed stochastic feedback is admitted when it satisfies the same certification test. Reproducible synthetic laboratories for personal preparation, supplier participation, and customer retention illustrate exact, operator-supplied, and noisy feedback cases. Multinomial experiments show improving recovery of the feedback function and fewer unresolved decisions with increasing sample size, while unrestricted off-policy recovery remains limited. The contribution is a structure-preserving representation--identification--decision workflow, not a domain-specific physiological or commercial calibration.

eess.SY↗

arXiv2026

Fusion Estimation in Multi-sensor Systems for Data Packets with Disrupted Identities

In this paper, we explore the problem of fusion estimation for a multi-sensor system where the identity of the data packet received by each sensor may be disrupted or incorrect due to confusion in device identity allocation, communication protocol defects, or the lack of a clear sensor identifier. This can result in a random shuffle of the data components during the fusion estimation process, compromising the performance of the fusion estimation. To address this issue, we introduce the concepts of permutations and symmetry groups to describe this phenomenon as data packet permutation. We construct statistics to simplify the information set, developing two algorithms: a Bayesian approach, which performs fusion using posterior arrangement probabilities, and a greedy approach, which effectively improves estimation performance by guessing the likely data arrangement. We compare these two algorithms and demonstrate that both are expectation error-bounded. We improve algorithms for information-scarce scenarios. By employing the expectation-maximization algorithm, we fill in the prior information of data arrangement where the correct convergence is proven. Finally, we present numerical simulations to validate our results.

eess.SY↗

arXiv2026

Quantifying the Reality Gap for RL-Based UAV Placement at mmWave and Sub-THz

Reinforcement learning (RL) policies for unmanned aerial vehicle (UAV) placement in mmWave and sub-terahertz networks are typically trained on simplified analytical channels. We quantify the resulting sim-to-real gap on a real urban map of Doha, Qatar, at carriers {28, 140, 183, 300} GHz and altitudes {50, 75, 100, 125} m, evaluating three channel pipelines: an analytical model (FSPL + atmospheric absorption + cuboid LoS), full Monte-Carlo ray tracing in Sionna RT with ITU-R P.676-13 absorption, and a deterministic-LoS hybrid that reuses Sionna's mesh under a closed-form path-gain expression. We formalize the gap on the spatial SNR distribution via four metrics, namely bias, RMSE, Jensen-Shannon divergence, and optimum-deployment displacement. Three findings emerge: at 28/140 GHz, $\sim$70% of the apparent -5.6/-4.8 dB Sionna bias is Monte-Carlo undersampling and shrinks to -1.7/-1.5 dB after mitigation; at 183 GHz a -9.2 dB residual isolates the atmospheric absorption / ITU-R P.676 line-shape disagreement; at 300 GHz the stochastic ray tracer agrees with the analytical model only coincidentally, with a +3.8 dB structural offset exposed by the deterministic-LoS pipeline. Across all carriers the linear-domain regret of the analytical-trained policy stays $\geq$ 0.93, indicating practical near-optimality but with a carrier-resolved SNR bias that warrants explicit reporting.

eess.SY↗