Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2101.08694

Processing of Global Solar Irradiance and Ground-Based Infrared Sky Images for Solar Nowcasting and Intra-Hour Forecasting Applications

Guillermo Terrén-Serrano·Manel Martínez-Ramón
View original source ↗Read source document ↗Export metadata ↓

Abstract

The projection of shadows from moving clouds in the troposphere impacts energy generation in power grids using photovoltaic systems. This investigation proposes an efficient method of data processing for the statistical quantification of cloud features using infrared images and global solar irradiance measurements. The infrared images and the global solar irradiance measurements are acquired using a sky imager equipped with a commercial low-cost long-wave infrared radiometric camera and a pyranometer. The enclosure of the infrared camera is mounted on a solar tracker so that the Sun stays in the center of images throughout the day. We explain how to remove cyclostationary biases in global solar irradiance measurements. Seasonal trends are removed from the global solar irradiance time series, using the theoretical global solar irradiance to obtain the clear sky index time series. We introduce an atmospheric model to remove the effect of atmospheric scattering and the effect of the Sun's direct irradiance from infrared images. Scattering is produced by water spots and dust particles on the germanium lens of the camera enclosure. We explain how to remove the scattering effect produced by the germanium lens attached to the data acquisition system enclosure window of the infrared camera. An atmospheric condition model classifies the sky conditions in four different categories: clear sky, cumulus, stratus and nimbus. When an infrared image is classified in the category of clear sky, it is used to model the scattering effect produced by the germanium lens.

Explore related subjects

astro-ph.IMeess.IV

Keep this discovery

BibTeXRIS

Guillermo Terrén-Serrano, Manel Martínez-Ramón. 2021-01-21. Processing of Global Solar Irradiance and Ground-Based Infrared Sky Images for Solar Nowcasting and Intra-Hour Forecasting Applications. https://doi.org/10.1016/j.solener.2023.111968

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗