SearcharxivSearch

arXiv · 2106.02763

Response of the low pressure hot-filament discharge plasma to a positively biased auxiliary disk electrode

Abstract

In steady-state, the plasma loss rate to the chamber wall is balanced by the ionization rate in the hot-filament discharges. This balance in the loss rate and ionization rate maintains the quasi--neutrality of the bulk plasma. In this report, we have studied the properties of bulk plasma in the presence of an auxiliary (additional) biased metal disk, which is working as a sink, in low-pressure helium plasma. A single Langmuir probe and emissive probe are used to characterize the plasma for various biases (positive and negative) to the metal disk, which was placed along the discharge axis inside the plasma. It is observed that only a positively biased disk increases the plasma potential, electron temperature, and plasma density. Moreover, the plasma parameters remain unaltered when the disk is negatively biased. The observed results for two different-sized positively metal disks are compared with an available theoretical model and found an opposite behavior of plasma density variation with the disk bias voltages at given discharge condition. The role of the primary energetic electron population in determining the plasma parameters is discussed. These experimental results are qualitatively explained on the basis of electrostatic confinement arising due to the loss of electrons to a biased metal disk electrode.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mangilal Choudhary, P. K. Sreejith. 2021-06-09. Response of the low pressure hot-filament discharge plasma to a positively biased auxiliary disk electrode. https://doi.org/10.1088/2058-6272%2Fac3641

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Mechanism of Ionization Avalanche in Tokamak Microwave Gas Breakdown

Microwave breakdown driven by electron cyclotron (EC) waves provides a non-inductive route to plasma initiation in reactor-scale tokamaks. We introduce a three-dimensional Monte Carlo simulation that, for the first time, self-consistently treats nonlinear wave-particle interactions, atomic collisions, and guiding-center transport. The Monte Carlo simulation unveils the key role of parallel Brownian motion in the ionization avalanche mechanism. The predicted breakdown boundary is validated against KSTAR experiments. This work concludes that microwave gas breakdown will be successful under ITER-relevant conditions at a D$_2$ prefill pressure near 2 mPa with 1 MW of injected EC power.

physics.plasm-ph

Augmented reality system for visualising magnetic field topology and charged-particle trajectories in magnetic fusion plasmas

A cost-effective augmented reality (AR) system is presented for visualising three-dimensional magnetic field structures and charged-particle trajectories in magnetically confined fusion plasmas. The system presented in this study integrates an orbit-following simulation code with a marker-based AR framework using a web camera and the OpenCV library. By synchronizing the time step of the simulation with the frame rate of the camera, the trajectories are continuously updated and superimposed in real time onto the camera image. Through the interactive operation of manipulating the web camera, users can observe three-dimensional structures, such as magnetic islands, from various positions and viewing angles. Such an AR environment supports an interactive means of exploring three-dimensional spatial structures that can be difficult to interpret from two-dimensional representations alone. It also provides a common visual representation that can be shared through a display by researchers and students with diverse backgrounds in physics, engineering, and related fields. The developed system has been used in practical exercises at the JT-60SA International Fusion School, with exploratory feedback from students.

physics.plasm-ph

Sensitivity of a low-shear heliotron configuration to localised ferrite-steel perturbations

The influence of ferritic steel on low-shear stellarator/heliotron magnetic configurations is investigated for the Heliotron J device using a point dipole magnetisation model. By numerically evaluating ferritic steel plates assumed at several locations inside the Heliotron J vacuum vessel, the changes in the rotational transform and magnetic island width are shown to be sensitive to the installation location. This location sensitivity arises from the toroidal variation of poloidal mode coupling between the background nonaxisymmetric field and ferritic-steel perturbation, rather than being determined solely by the perturbation amplitude. The resulting mode coupling can enhance the resonant vacuum magnetic perturbation at specific locations. Ferritic steel plates placed on the outer side of a straight section produce the most significant changes in the magnetic topology and exhibit the highest sensitivity to violations of the $M=4$ toroidal periodicity. Additionally, we show that appropriate arrangements of passive magnetic dipoles can reduce the effective helical ripple while preserving the vacuum magnetic well depth in Heliotron J, and can induce a stellarator-asymmetric boundary perturbation in low-field experiments.

physics.plasm-ph