SearcharxivSearch

arXiv · 2112.09246

36 Hz integral linewidth laser based on a photonic integrated 4.0-meter coil resonator

Abstract

Laser stabilization sits at the heart of many precision scientific experiments and applications, including quantum information science, metrology and atomic timekeeping. These systems narrow the laser linewidth and stabilize the carrier by use of Pound-Drever-Hall (PDH) locking to a table-scale, ultra-high quality factor (Q), vacuum spaced Fabry-Perot reference cavity. Integrating these cavities, to bring characteristics of PDH stabilization to the chip-scale, is critical to reduce their size, cost, and weight, and enable a wide range of portable and system-on-chip applications. We report a significant advance in integrated laser linewidth narrowing, stabilization and noise reduction, by use of a photonic integrated 4.0-meter-long coil resonator to stabilize a semiconductor laser. We achieve a 36 Hz 1/{\pi}-integral linewidth, an Allan deviation (ADEV) of 1.8x10^{-13} at 10 ms measurement time, and a 2.3 kHz/sec drift, to the best of our knowledge the lowest integral linewidth and highest stability demonstrated for an integrated reference cavity. Two coil designs, stabilizing lasers operating at 1550 nm and 1319 nm are demonstrated. The resonator is bus coupled to a 4.0-meter-long coil, with a 49 MHz free spectral range (FSR), a mode volume of 1.0x10^{10} {\mu}m^3 and a 142 million intrinsic Q, fabricated in a CMOS compatible, ultra-low loss silicon nitride waveguide platform. Our measurements and simulations show that the thermorefractive noise floor for this particular cavity is reached for frequencies down to 20 Hz in an ambient environment with simple passive vibration isolation and without vacuum or thermal isolation. The TRN limited performance is estimated to be an 8 Hz 1/{\pi} integral linewidth and ADEV of 5x10^{-14} at 10 ms, opening a stability regime that heretofore has only been available in fundamentally un-integrated systems.

Explore related subjects

Keep this discovery

BibTeXRIS

Kaikai Liu, Nitesh Chauhan, Jiawei Wang, Andrei Isichenko, Grant M. Brodnik, Paul A. Morton, Ryan Behunin, Scott B. Papp, Daniel J. Blumenthal. 2021-12-16. 36 Hz integral linewidth laser based on a photonic integrated 4.0-meter coil resonator. https://doi.org/10.1364/optica.451635

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics