arXiv subjects

Andrei Isichenko

Publications and source records attributed to Andrei Isichenko.

At least 19 recordsLinked to original sources

arXiv2026

Single- and Two-Qubit Gates Driven by an Integrated Photonic Laser

Trapped ions are a leading technology for quantum computing, but their reliance on bespoke tabletop laser and optical systems remains a major obstacle to scaling and robustness. Integrated silicon nitride lasers, compatible with future monolithic integration with surface electrode ion traps, have recently demonstrated frequency-selective qubit state preparation and measurement as well as interrogation of an optical clock transition. However, coherent qubit gates driven by integrated laser sources have not yet been demonstrated because coherent quantum logic imposes substantially more stringent performance requirements on the laser. Here, we use a visible-wavelength integrated Brillouin laser stabilized to an integrated coil resonator to drive coherent single- and two-qubit gates with $^{88}$Sr$^+$ optical qubits. We measure an average single-qubit fidelity of 99.61% $\pm$ 0.03% per Clifford gate with randomized benchmarking and use a two-qubit M{\o}lmer-S{\o}rensen interaction to generate an entangled Bell state with a fidelity of 92.35% $\pm$ 1.50%. The qubit exhibits a bare Ramsey coherence time of 660 $\pm$ 9 $\mu$s, extended to 1.750 $\pm$ 0.033 ms by spin echo. These results demonstrate that integrated visible-wavelength narrow-linewidth photonic lasers can meet the phase-noise requirements for coherent trapped ion quantum logic, providing a path for scalable optical systems integrated within trapped ion quantum processors.

quant-ph↗

arXiv2026

Ultra-Low-Noise Brillouin Hybrid Synthetic Laser for Sub-Hertz Lattice Clock Spectroscopy

Frequency-stable lasers enable high-fidelity quantum state manipulation, which forms the basis of optical atomic clocks, quantum sensing, and quantum computation. Performing state manipulations at increasingly high speeds requires attention to laser frequency noise at high Fourier (carrier-offset) frequencies that cannot be addressed by traditional cavity stabilization alone. Scalable operations also benefit from device miniaturization. Here, we demonstrate a hybrid laser stabilization approach that combines ultrahigh frequency stability of a cryogenic silicon cavity with high-Fourier-frequency noise suppression of an integrated Brillouin laser. The combined system suppresses frequency noise over a Fourier span of more than 7 decades, yielding a <1 Hz phase-integrated linewidth and 0.2 Hz^2/Hz frequency noise at Fourier frequencies above 10 MHz. The performance of this hybrid laser is confirmed by sub-Hz Rabi spectroscopy with a three-dimensional ^{87}Sr lattice clock. This work demonstrates record-low frequency noise at 698 nm over an extensive Fourier frequency range and highlights the promise of precision clock spectroscopy using a chip-scale integrated laser technology.

physics.optics↗

arXiv2026

A narrow-linewidth Brillouin laser for a two-photon rubidium frequency standard

High precision portable and deployable frequency standards are required for modern navigation and communication technologies. Optical frequency standards are attractive for their improved stability over their microwave counterparts; however, increased complexities have anchored them in the laboratory. Sacrificing sensitivity of the most stable optical clocks has led to the recent development of deployable and portable optical frequency standards, leveraging hot atomic or molecular vapor. The short term limit for a majority of previous reports on two-photon rubidium standards is either the shot-noise or intermodulation limit hindering the one second fractional frequency stability to around $1\times10^{-13}/\sqrt{\tau}$. The answer for the shot-noise limit is to increase optical power and collected fluorescence, while the intermodulation limit solution requires improvements in laser linewidth, stimulated Brillouin scattering (SBS) lasers are known to reduce frequency noise, suppressing noise of the pump laser at high offset frequencies. We investigate an optical frequency standard based on the two-photon transition in $^{87}$Rb probed with a narrow linewidth photonic integrated circuit SBS laser with a quality factor over 130 million and instantaneous linewidth $<$ 10 Hz. The use of a narrow linewidth clock laser coupled with operating at higher optical intensities yields clock instabilities of $2\times10^{-14}$ at one second, currently the best reported short-term stability for a two-photon rubidium optical frequency standard.

physics.atom-ph↗

arXiv2026

Blue to Near-IR Integrated PZT Silicon Nitride Modulators for Quantum and Atomic Applications

Modulation and control of lasers and optical signals is necessary for trapped-ion and cold neutral atom quantum systems. Given the diversity of atomic species, experimental modalities, and architectures, integrated optical modulators designed to operate across the visible to near-infrared spectrum are a key step towards portable, robust, and compact quantum computers, clocks, and sensors. Integrated optical modulators that are wavelength-independent, CMOS-compatible, and capable of maintaining low waveguide losses and a high resonator quality factor, DC-coupled broadband frequency response, and low power consumption, are essential for scalable photonic integration. Yet progress towards these goals has remained limited. Here we demonstrate four types of integrated stress-optic lead zirconate titanate (PZT) silicon nitride modulators: a coil Mach-Zehnder modulator, a coil pure phase modulator, and bus-coupled and add-drop ring resonator modulators, with operation from 493 nm to 780 nm. The coil MZM operates at 532 nm with a V${\pi}$ of 2.8V, a 0.4 MHz 3-dB bandwidth, and an extinction ratio of 21.5dB. The coil phase modulator operates at 493 nm with a V${\pi}$ of 2.8V and low residual amplitude modulation of -34 dB at a 1kHz offset. The bus-coupled ring resonator modulator operates at 493 nm and the add-drop ring resonator modulator operates at 780 nm. The ring-based modulators have an intrinsic quality factor of 3.4 million and 1.9 million, a linear tuning strength of 0.9 GHz/V and 1 GHz/V, and a 3-dB bandwidth of 2.6 MHz and 10 MHz, respectively. All four modulator designs maintain the low optical waveguide loss of SiN, are DC coupled with broadband frequency response, operate independent of wavelength, and consume only tens of nW per actuator. Such solutions unlock the potential for further integration with other precision SiN components to realize chip-scale atomic and quantum systems.

physics.optics↗

arXiv2026

Sub-Doppler rubidium atom cooling using a programmable agile integrated PZT-on-SiN resonator

Programmability and precise control of laser frequency are essential for quantum experiments and applications such as atomic clocks, quantum computers, and cold-atom sensors. Current systems use bulky, power-hungry modulators and frequency shifters which are difficult to integrate and limit portability and scalability. We report an electrically controllable, agile optical frequency source based on a semiconductor laser stabilized to a photonic-integrated, lead zirconate titanate (PZT)-actuated resonator cavity. We demonstrate this approach with precision programmable frequency control of a 780-nm laser that can periodically reference to rubidium spectroscopy followed by fast, programmable, arbitrary frequency tuning sequences for quantum control. We use this approach to demonstrate sub-Doppler cooling of rubidium-87 without any external modulators, achieving atom-cloud temperatures as low as 16 $\mu$K. The device achieves a tuning strength up to 1 GHz/V with 11 MHz modulation bandwidth while consuming only 10 nW of electrical power. This work establishes a route toward compact, low-power, and chip-scale laser systems for next-generation quantum and atomic sensing technologies.

physics.optics↗

arXiv2025

Multi-laser stabilization with an atomic-disciplined photonic integrated resonator

Precision atomic and quantum experiments rely on ultra-stable narrow linewidth lasers constructed using table-top ultra-low expansion reference cavities. These experiments often require multiple lasers, operating at different wavelengths, to perform key steps used in state preparation and measurement required in quantum sensing and computing. This is traditionally achieved by disciplining a cavity-stabilized laser to a key atomic transition and then transferring the transition linewidth and stability to other lasers using the same reference cavity in combination with bulk-optic frequency shifting such as acousto-optic modulators. Transitioning such capabilities to a low cost photonic-integrated platform will enable a wide range of portable, low power, scalable quantum experiments and applications. Yet, today's bulk optic approaches pose challenges related to lack of cavity tunability, large free spectral range, and limited photonic integration potential. Here, we address these challenges with demonstration of an agile photonic-integrated 780 nm ultra-high-Q tunable silicon nitride reference cavity that performs multiple critical experimental steps including laser linewidth narrowing, high resolution rubidium spectroscopy, dual-stage stabilization to a rubidium transition, and stability transfer to other lasers. We achieve up to 20 dB of frequency noise reduction at 10 kHz offset, precision spectroscopy over a 250 MHz range, and dual-stage locking to rubidium with an Allan deviation of $8.5 \times 10^{-12}$ at 1 s and up to 40 dB reduction at 100 Hz. We further demonstrate the transfer of this atomic stability to a second laser, via the rubidium-disciplined cavity, and demonstrate multi-wavelength Rydberg electrometry quantum sensing. These results pave the path for integrated, compact, and scalable solutions for quantum sensing, computing and other atomic and trapped ion applications.

physics.optics↗

arXiv2025

Octave Spanning Visible to SWIR Integrated Coil-Stabilized Brillouin Lasers

Narrow linewidth stabilized lasers are central to precision applications that operate across the visible to short-wave infrared wavelengths, including optical clocks, quantum sensing and computing, ultra-low noise microwave generation, and fiber sensing. Today, these spectrally pure sources are realized using multiple external cavity tabletop lasers locked to bulk-optic free-space reference cavities. Integration of this technology will enable portable precision applications with improved reliability and robustness. Here, we report wavelength-flexible design and operation, over more than an octave span, of an integrated coil-resonator-stabilized Brillouin laser architecture. Leveraging a versatile two-stage noise reduction approach, we achieve low linewidths and high stability with chip-scale laser designs based on the ultra-low-loss, CMOS-compatible silicon nitride platform. We report operation at 674 and 698 nm for applications to strontium neutral and trapped-ion clocks, quantum sensing and computing, and at 1550 nm for applications to fiber sensing and ultra-low phase noise microwave generation. Over this range we demonstrate frequency noise reduction from 1 Hz to 10 MHz resulting in 1.0 Hz -17 Hz fundamental and 181 Hz - 630 Hz integral linewidths and an Allan deviation of 6.5 x 10-13 at 1 ms for 674 nm, 6.0 x 10-13 at 15 ms for 698 nm, and 2.6 x10-13 at 15 ms for 1550 nm. This represents the lowest achieved linewidths and highest stability for integrated stabilized Brillouin lasers over an order of magnitude improvement in operating wavelength range. These results unlock the potential of integrated, ultra-low-phase-noise stabilized lasers for precision applications and further integration in systems-on-chip solutions.

physics.optics↗

arXiv2025

Hybrid integrated ultra-low linewidth coil stabilized isolator-free widely tunable external cavity laser

Precision applications including quantum computing and sensing, mmWave/RF generation, and metrology, demand widely tunable, ultra-low phase noise lasers. Today, these experiments employ table-scale systems with bulk-optics and isolators to achieve requisite noise, stability, and tunability. Photonic integration will enable scalable, reliable and portable solutions. Here we report a hybrid-integrated external cavity widely tunable laser stabilized to a 10-meter-long integrated coil-resonator, achieving record-low 3 - 7 Hz fundamental linewidth across a 60 nm tuning range and 27 - 60 Hz integral linewidth with 1.8E-13 Allan deviation at 6.4 ms across 40 nm, delivering orders of magnitude frequency noise and integral linewidth reduction over state of the art. Stabilization is achieved without an optical isolator, leveraging resilience to optical feedback of 30 dB beyond that of commercial DFB lasers. The laser and reference cavity are fabricated in the same Si3N4 CMOS-compatible process, unlocking a path towards fully integrated visible to ShortWave-IR frequency stabilized lasers.

physics.optics↗

arXiv2024

Sub-100 Hz Intrinsic Linewidth 852 nm Silicon Nitride External Cavity Laser

We demonstrate an external cavity laser with intrinsic linewidth below 100 Hz around an operating wavelength of 852 nm, selected for its relevance to laser cooling and manipulation of cesium atoms. This system achieves a maximum CW output power of 24 mW, wavelength tunability over 15 nm, and a side-mode suppression ratio exceeding 50 dB. This performance level is facilitated by careful design of a low-loss integrated silicon nitride photonic circuit serving as the external cavity combined with commercially available semiconductor gain chips. This approach demonstrates the feasibility of compact integrated lasers with sub-kHz linewidth centering on the needs of emerging sensor concepts based on ultracold atoms and can be further extended to shorter wavelengths via selection of suitable semiconductor gain media.

physics.optics↗

arXiv2024

Trapped ion qubit and clock operations with a visible wavelength photonic coil resonator stabilized integrated Brillouin laser

Integrating precise, stable, ultra-low noise visible light lasers into atomic systems is critical for advancing quantum information sciences and improving scalability and portability. Trapped ions are a leading approach for high-fidelity quantum computing, high-accuracy optical clocks, and precision quantum sensors. However, current ion-based systems rely on bulky, lab-scale precision lasers and optical stabilization cavities for optical clock and qubit operations, constraining the size, weight, scalability, and portability of atomic systems. Chip-scale integration of ultra-low noise lasers and reference cavities operating directly at optical clock transitions and capable of qubit and clock operations will represent a major transformation in atom and trapped ion-based quantum technologies. However, this goal has remained elusive. Here we report the first demonstration of chip-scale optical clock and qubit operations on a trapped ion using a photonic integrated direct-drive visible wavelength Brillouin laser stabilized to an integrated 3-meter coil-resonator reference cavity and the optical clock transition of a $^{88}$Sr$^+$ ion trapped on a surface electrode chip. We also demonstrate for the first time, to the best of our knowledge, trapped-ion spectroscopy and qubit operations such as Rabi oscillations and high fidelity (99%) qubit state preparation and measurement (SPAM) using direct drive integrated photonic technologies without bulk optic stabilization cavities or second harmonic generation. Our chip-scale stabilized Brillouin laser exhibits a 6 kHz linewidth with the 0.4 Hz quadrupole transition of $^{88}$Sr$^+$ and a self-consistent coherence time of 60 $\mu$s via Ramsey interferometry on the trapped ion qubit. Furthermore, we demonstrate the stability of the locked Brillouin laser to 5$\times10^{-13}/ \sqrt{\tau}$ at 1 second using dual optical clocks.

quant-ph↗

arXiv2023

Anneal-free ultra-low loss silicon nitride integrated photonics

Heterogeneous and monolithic integration of the versatile low loss silicon nitride platform with low temperature materials such as silicon electronics and photonics, III-V compound semiconductors, lithium niobate, organics, and glasses, has been inhibited by the need for high temperature annealing as well as the need for different process flows for thin and thick waveguides. New techniques are needed to maintain the state-of-the-art losses, nonlinear properties, and CMOS compatible processes while enabling this next generation of 3D silicon nitride integration. We report a significant advance in silicon nitride integrated photonics, demonstrating the lowest losses to date for an anneal-free process at a maximum temperature of 250 C, with the same deuterated silane based fabrication flow, for nitride and oxide, for an order of magnitude range in nitride thickness without requiring stress mitigation or polishing. We report record low losses for anneal-free nitride core and oxide cladding, enabling 1.77 dB/m loss and 14.9 million Q for 80 nm nitride core waveguides, more than half an order magnitude lower loss than previously reported 270 C processes, and 8.66 dB/m loss and 4.03 million Q for 800 nm thick nitride. We demonstrate laser stabilization with over 4 orders of magnitude frequency noise reduction using a thin nitride reference cavity. And using a thick nitride micro-resonator, we demonstrate parametric gain and Optical Parametric Oscillation (OPO) with the lowest reported OPO threshold per unit resonator length for low temperature fabricated nitride, and supercontinuum generation over two octaves. These results represent a significant step towards a uniform ultra-low loss silicon nitride homogeneous and heterogeneous platform for both thin and thick waveguides capable of linear and nonlinear photonic circuits and integration with low temperature materials and processes.

physics.optics↗

arXiv2023

Chip-Scale, Sub-Hz Fundamental Sub-kHz Integral Linewidth 780 nm Laser through Self-Injection-Locking a Fabry-P\'erot laser to an Ultra-High Q Integrated Resonator

Today's state of the art precision experiments in quantum, gravimetry, navigation, time keeping, and fundamental science have strict requirements on the level and spectral distribution of laser frequency noise. For example, the laser interaction with atoms and qubits requires ultra-low frequency noise at multiple offset frequencies due to hyperfine atomic transitions, motional sidebands, and fast pulse sequencing. Chip-scale integration of lasers that meet these requirements is essential for reliability, low-cost, and weight. Here, we demonstrate a significant advancement in atomic precision light sources by realizing a chip-scale, low-cost, 780 nm laser for rubidium atom applications with record-low 640 mHz (white noise floor at 0.2 Hz$^2$/Hz) fundamental and 732 Hz integral linewidths and a frequency noise that is multiple orders of magnitude lower than previous hybrid and heterogeneous self-injection locked 780 nm lasers and lower noise than bulk microresonator implementations. The laser is a Fabry-P\'erot laser diode self-injection locked to an ultra-high Q photonic integrated silicon nitride resonator. This performance is enabled by a 145 million resonator Q with a 30 dB extinction ratio, the highest Q at 780 nm, to the best of our knowledge. We analyze the impact of our frequency noise on specific atomic applications including atomic frequency references, Rydberg quantum gates, and cold atom gravimeters. The photonic integrated resonator is fabricated using a CMOS foundry-compatible, wafer-scale process, with demonstrated integration of other components showing promise for a full system-on-a-chip. This performance is scalable to other visible atomic wavelengths, opening the door to a variety of transitions across many atomic species and enabling low-power, compact, ultra-low noise lasers impacting applications including quantum sensing, computing, clocks and more.

physics.optics↗

arXiv2022

Photonic integrated beam delivery in a rubidium 3D magneto-optical trap

Cold atoms are important for precision atomic applications including timekeeping and sensing. The 3D magneto-optical trap (3D-MOT), used to produce cold atoms, will benefit from photonic integration to improve reliability and reduce size, weight, and cost. These traps require the delivery of multiple, large area, collimated laser beams to an atomic vacuum cell. Yet, to date, beam delivery using an integrated waveguide approach has remained elusive. We report the demonstration of a 87Rb 3D-MOT using a fiber-coupled photonic integrated circuit to deliver all beams to cool and trap > 1 x 10^6 atoms to near 200 {\mu}K. The silicon nitride photonic circuit transforms fiber-coupled 780 nm cooling and repump light via waveguides to three mm-width non-diverging free-space cooling and repump beams directly to the rubidium cell. This planar, CMOS foundry-compatible integrated beam delivery is compatible with other components, such as lasers and modulators, promising system-on-chip solutions for cold atom applications.

physics.optics↗

arXiv2021

36 Hz integral linewidth laser based on a photonic integrated 4.0-meter coil resonator

Laser stabilization sits at the heart of many precision scientific experiments and applications, including quantum information science, metrology and atomic timekeeping. These systems narrow the laser linewidth and stabilize the carrier by use of Pound-Drever-Hall (PDH) locking to a table-scale, ultra-high quality factor (Q), vacuum spaced Fabry-Perot reference cavity. Integrating these cavities, to bring characteristics of PDH stabilization to the chip-scale, is critical to reduce their size, cost, and weight, and enable a wide range of portable and system-on-chip applications. We report a significant advance in integrated laser linewidth narrowing, stabilization and noise reduction, by use of a photonic integrated 4.0-meter-long coil resonator to stabilize a semiconductor laser. We achieve a 36 Hz 1/{\pi}-integral linewidth, an Allan deviation (ADEV) of 1.8x10^{-13} at 10 ms measurement time, and a 2.3 kHz/sec drift, to the best of our knowledge the lowest integral linewidth and highest stability demonstrated for an integrated reference cavity. Two coil designs, stabilizing lasers operating at 1550 nm and 1319 nm are demonstrated. The resonator is bus coupled to a 4.0-meter-long coil, with a 49 MHz free spectral range (FSR), a mode volume of 1.0x10^{10} {\mu}m^3 and a 142 million intrinsic Q, fabricated in a CMOS compatible, ultra-low loss silicon nitride waveguide platform. Our measurements and simulations show that the thermorefractive noise floor for this particular cavity is reached for frequencies down to 20 Hz in an ambient environment with simple passive vibration isolation and without vacuum or thermal isolation. The TRN limited performance is estimated to be an 8 Hz 1/{\pi} integral linewidth and ADEV of 5x10^{-14} at 10 ms, opening a stability regime that heretofore has only been available in fundamentally un-integrated systems.

physics.optics↗

arXiv2021

Photonic circuits for laser stabilization with ultra-low-loss and nonlinear resonators

Laser-frequency stabilization with on-chip photonic integrated circuits will provide compact, low cost solutions to realize spectrally pure laser sources. Developing high-performance and scalable lasers is critical for applications including quantum photonics, precision navigation and timing, spectroscopy, and high-capacity fiber communications. We demonstrate a significant advance in compact, stabilized lasers to achieve a record low integral emission linewidth and precision carrier stabilization by combining integrated waveguide nonlinear Brillouin and ultra-low loss waveguide reference resonators. Using a pair of 56.4 Million quality factor (Q) Si$_3$N$_4$ waveguide ring-resonators, we reduce the free running Brillouin laser linewidth by over an order of magnitude to 330 Hz integral linewidth and stabilize the carrier to 6.5$\times$10$^{-13}$ fractional frequency at 8 ms, reaching the cavity-intrinsic thermorefractive noise limit for frequencies down to 80 Hz. This work demonstrates the lowest linewidth and highest carrier stability achieved to date using planar, CMOS compatible photonic integrated resonators, to the best of our knowledge. These results pave the way to transfer stabilized laser technology from the tabletop to the chip-scale. This advance makes possible scaling the number of stabilized lasers and complexity of atomic and molecular experiments as well as reduced sensitivity to environmental disturbances and portable precision atomic, molecular and optical (AMO) solutions.

physics.optics↗

arXiv2021

Integrated Reference Cavity for Dual-mode Optical Thermometry and Frequency Stabilization

Optical frequency stabilization is a critical component for precision scientific systems including quantum sensing, precision metrology, and atomic timekeeping. Ultra-high quality factor photonic integrated optical resonators are a prime candidate for reducing their size, weight and cost as well as moving these systems on chip. However, integrated resonators suffer from temperature-dependent resonance drift due to the large thermal response as well as sensitivity to external environmental perturbations. Suppression of the cavity resonance drift can be achieved using precision interrogation of the cavity temperature through the dual-mode optical thermometry. This approach enables measurement of the cavity temperature change by detecting the resonance difference shift between two polarization or optical frequency modes. Yet this approach has to date only been demonstrated in bulk-optic whispering gallery mode and fiber resonators. In this paper, we implement dual-mode optical thermometry using dual polarization modes in a silicon nitride waveguide resonator for the first time, to the best of our knowledge. The temperature responsivity and sensitivity of the dual-mode TE/TM resonance difference is 180.7$\pm$2.5 MHz/K and 82.56 $\mu$K, respectively, in a silicon nitride resonator with a 179.9E6 intrinsic TM mode Q factor and a 26.6E6 intrinsic TE mode Q factor. Frequency stabilization is demonstrated by locking a laser to the TM mode cavity resonance and applying the dual-mode resonance difference to a feedforward laser frequency drift correction circuit with a drift rate improvement to 0.31 kHz/s over the uncompensated 10.03 kHz/s drift rate. Allan deviation measurements with dual-mode feedforward-correction engaged shows that a fractional frequency instability of 9.6E-11 over 77 s can be achieved.

physics.ins-det↗

arXiv2021

Fully symmetric controllable integrated three-resonator photonic molecule

Photonic molecules can be used to realize complex optical energy states and modes, analogous to those found in molecules, with properties useful for applications like spectral engineering and quantum optics. It is desirable to implement photonic molecules using high quality factor photonic integrated ring resonators due to their narrow atom-like spectral resonance, tunability, and the ability to scale the number of resonators on a photonic circuit. However, to take full advantage of molecule spectral complexity and tuning degree of freedom, resonator structures should have full symmetry in terms of inter-resonator coupling and resonator-waveguide coupling as well as independent resonance tuning, and low power dissipation operation, in a scalable integration platform. To date, photonic molecule symmetry has been limited to dual- and triple-cavity geometries coupled to single- or dual-busses, and resonance tuning limited to dual resonator molecules. In this paper, we demonstrate a three-resonator photonic molecule, consisting of symmetrically coupled 8.11 million intrinsic Q silicon nitride rings, where each ring is coupled to the other two rings. The resonance of each ring, and that of the collective molecule, is controlled using low power dissipation, monolithically integrated thin-film lead zirconate titanate (PZT) actuators that are integrated with the ultra-low loss silicon nitride resonators. This performance is achieved without undercut waveguides, yielding the highest Q to date for a PZT controlled resonator. This advance leads to full control of complex photonic molecule resonance spectra and splitting in a wafer-scale integration platform. The resulting six tunable supermodes can be fully controlled, including degeneracy, location and splitting as well as designed by a model that can accurately predict the energy modes and transmission spectrum and tunable resonance splitting.

physics.optics↗

arXiv2021

Visible light photonic integrated Brillouin laser

Narrow linewidth visible light lasers are critical for atomic, molecular and optical (AMO) applications including atomic clocks, quantum computing, atomic and molecular spectroscopy, and sensing. Historically, such lasers are implemented at the tabletop scale, using semiconductor lasers stabilized to large optical reference cavities. Photonic integration of high spectral-purity visible light sources will enable experiments to increase in complexity and scale. Stimulated Brillouin scattering (SBS) is a promising approach to realize highly coherent on-chip visible light laser emission. While progress has been made on integrated SBS lasers at telecommunications wavelengths, barriers have existed to translate this performance to the visible, namely the realization of Brillouin-active waveguides in ultra-low optical loss photonics. We have overcome this barrier, demonstrating the first visible light photonic integrated SBS laser, which operates at 674 nm to address the 88Sr+ optical clock transition. To guide the laser design, we use a combination of multi-physics simulation and Brillouin spectroscopy in a 2 meter spiral waveguide to identify the 25.110 GHz first order Stokes frequency shift and 290 MHz gain bandwidth. The laser is implemented in an 8.9 mm radius silicon nitride all-waveguide resonator with 1.09 dB per meter loss and Q of 55.4 Million. Lasing is demonstrated, with an on-chip 14.7 mW threshold, a 45% slope efficiency, and linewidth narrowing as the pump is increased from below threshold to 269 Hz. To illustrate the wavelength flexibility of this design, we also demonstrate lasing at 698 nm, the wavelength for the optical clock transition in neutral strontium. This demonstration of a waveguide-based, photonic integrated SBS laser that operates in the visible, and the reduced size and sensitivity to environmental disturbances, shows promise for diverse AMO applications.

physics.optics↗