Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2112.09283

Cavity Induced Extraordinary Optical Transmission and Active Modulation with Graphene

Yifei Zhang·Baoqing Zhang·Mingming Feng·Haotian Ling·Xijian Zhang·Yiming Wang·Xiaomu Wang·Qingpu Wang·Aimin Song
View original source ↗Read source document ↗Export metadata ↓

Abstract

Extraordinary optical transmission (EOT) is a phenomenon of exceptional light transmission through a metallic film with hole arrays enhanced by surface plasmon (SP) resonance, which stimulates renewed research hotspots in metamaterials, subwavelength optics, and plasmonics. Below the frequency of the first order SP mode, f_pl0, the metallic film typically shows strong reflection and no EOT. Here, we report an unusual EOT phenomenon below fpl0, i.e., beyond the long-held spectral boundary of classic EOTs. It is induced by a novel bound surface state in a Fabry-Perot(F-P) cavity comprising a holey gold film and a silicon-air interface. By tailoring the cavity length, EOT phenomenon has been pushed deep into the sub-wavelength region by a factor of as large as 20%, and EOT frequency comb with cavity function has been achieved. Due to the enhanced slow-wave effect as the frequency approaches fpl0, the cavity induced EOT gradually merges with the first order SP EOT. Distinguishing from the classic EOT phenomenon, no transmission zero is found between these two EOTs, which dramatically broadens the EOT bandwidth by a factor of 10 at terahertz (THz) frequencies. Furthermore, the EOT transmittance is actively modulated with graphene, achieving a large modulation range from 0.5 to 0.25 under a sub-volt bias from -0.3 to 0.5 V at 500 GHz. To the best of the authors' knowledge, both the modulation range and the low bias are among the best for active EOT devices with graphene to date. Such a structure provides a new strategy for miniaturizing sensing devices, high-power sources, and broadband photonics as well as their active control in the THz regime.

Explore related subjects

physics.optics

Keep this discovery

BibTeXRIS

Yifei Zhang, Baoqing Zhang, Mingming Feng, Haotian Ling, Xijian Zhang, Yiming Wang, Xiaomu Wang, Qingpu Wang, Aimin Song. 2021-12-17. Cavity Induced Extraordinary Optical Transmission and Active Modulation with Graphene. https://arxiv.org/abs/2112.09283

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗
arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗
arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗