arXiv subjects

Xiaomu Wang

Publications and source records attributed to Xiaomu Wang.

18 recordsLinked to original sources

arXiv2024

Mask-Enhanced Segment Anything Model for Tumor Lesion Semantic Segmentation

Tumor lesion segmentation on CT or MRI images plays a critical role in cancer diagnosis and treatment planning. Considering the inherent differences in tumor lesion segmentation data across various medical imaging modalities and equipment, integrating medical knowledge into the Segment Anything Model (SAM) presents promising capability due to its versatility and generalization potential. Recent studies have attempted to enhance SAM with medical expertise by pre-training on large-scale medical segmentation datasets. However, challenges still exist in 3D tumor lesion segmentation owing to tumor complexity and the imbalance in foreground and background regions. Therefore, we introduce Mask-Enhanced SAM (M-SAM), an innovative architecture tailored for 3D tumor lesion segmentation. We propose a novel Mask-Enhanced Adapter (MEA) within M-SAM that enriches the semantic information of medical images with positional data from coarse segmentation masks, facilitating the generation of more precise segmentation masks. Furthermore, an iterative refinement scheme is implemented in M-SAM to refine the segmentation masks progressively, leading to improved performance. Extensive experiments on seven tumor lesion segmentation datasets indicate that our M-SAM not only achieves high segmentation accuracy but also exhibits robust generalization. The code is available at https://github.com/nanase1025/M-SAM.

eess.IV↗

arXiv2021

Cavity Induced Extraordinary Optical Transmission and Active Modulation with Graphene

Extraordinary optical transmission (EOT) is a phenomenon of exceptional light transmission through a metallic film with hole arrays enhanced by surface plasmon (SP) resonance, which stimulates renewed research hotspots in metamaterials, subwavelength optics, and plasmonics. Below the frequency of the first order SP mode, f_pl0, the metallic film typically shows strong reflection and no EOT. Here, we report an unusual EOT phenomenon below fpl0, i.e., beyond the long-held spectral boundary of classic EOTs. It is induced by a novel bound surface state in a Fabry-Perot(F-P) cavity comprising a holey gold film and a silicon-air interface. By tailoring the cavity length, EOT phenomenon has been pushed deep into the sub-wavelength region by a factor of as large as 20%, and EOT frequency comb with cavity function has been achieved. Due to the enhanced slow-wave effect as the frequency approaches fpl0, the cavity induced EOT gradually merges with the first order SP EOT. Distinguishing from the classic EOT phenomenon, no transmission zero is found between these two EOTs, which dramatically broadens the EOT bandwidth by a factor of 10 at terahertz (THz) frequencies. Furthermore, the EOT transmittance is actively modulated with graphene, achieving a large modulation range from 0.5 to 0.25 under a sub-volt bias from -0.3 to 0.5 V at 500 GHz. To the best of the authors' knowledge, both the modulation range and the low bias are among the best for active EOT devices with graphene to date. Such a structure provides a new strategy for miniaturizing sensing devices, high-power sources, and broadband photonics as well as their active control in the THz regime.

physics.optics↗

arXiv2020

Engineering photonic environments for two-dimensional materials

A fascinating photonic platform with a small device scale, fast operating speed, as well as low energy consumption is two-dimensional (2D) materials, thanks to their in-plane crystalline structures and out-of-plane quantum confinement. The key to further advancement in this research field is the ability to modify the optical properties of the 2D materials. The modifications typically come from the materials themselves, for example, altering their chemical compositions. This article reviews a comparably less explored but promising means, through engineering the photonic surroundings. Rather than modifying materials themselves, this means manipulates the dielectric and metallic environments, both uniform and nanostructured, that directly interact with the materials. For 2D materials that are only one or a few atoms thick, the interaction with the environment can be remarkably efficient. This review summarizes the three degrees of freedom of this interaction: weak coupling, strong coupling, and multi-functionality. Also, it reviews a relatively timing concept of engineering that directly applied to the 2D materials by patterning. Benefiting from the burgeoning development of nanophotonics, the engineering of photonic environments provides a versatile and creative methodology of reshaping light-matter interaction in 2D materials.

physics.optics↗

arXiv2020

Gate-tunable van der Waals heterostructure for reconfigurable neural network vision sensor

Early processing of visual information takes place in the human retina. Mimicking neurobiological structures and functionalities of the retina provide a promising pathway to achieving vision sensor with highly efficient image processing. Here, we demonstrate a prototype vision sensor that operates via the gate-tunable positive and negative photoresponses of the van der Waals (vdW) vertical heterostructures. The sensor emulates not only the neurobiological functionalities of bipolar cells and photoreceptors but also the unique synaptic connectivity between bipolar cells and photoreceptors. By tuning gate voltage for each pixel, we achieve reconfigurable vision sensor for simultaneously image sensing and processing. Furthermore, our prototype vision sensor itself can be trained to classify the input images, via updating the gate voltages applied individually to each pixel in the sensor. Our work indicates that vdW vertical heterostructures offer a promising platform for the development of neural network vision sensor.

cond-mat.mtrl-sci↗

arXiv2019

Edge-Epitaxial Growth of InSe Nanowires toward High-Performance Photodetectors

Semiconducting nanowires offer many opportunities for electronic and optoelectronic device applications due to their special geometries and unique physical properties. However, it has been challenging to synthesize semiconducting nanowires directly on SiO2/Si substrate due to lattice mismatch. Here, we developed a catalysis-free approach to achieve direct synthesis of long and straight InSe nanowires on SiO2/Si substrate through edge-homoepitaxial growth. We further achieved parallel InSe nanowires on SiO2/Si substrate through controlling growth conditions. We attributed the underlying growth mechanism to selenium self-driven vapor-liquid-solid process, which is distinct from conventional metal-catalytic vapor-liquid-solid method widely used for growing Si and III-V nanowires. Furthermore, we demonstrated that the as-grown InSe nanowire-based visible light photodetector simultaneously possesses an extraordinary photoresponsivity of 271 A/W, ultrahigh detectivity of 1.57*10^14 Jones and a fast response speed of microsecond scale. The excellent performance of the photodetector indicates that as-grown InSe nanowires are promising in future optoelectronic applications. More importantly, the proposed edge-homoepitaxial approach may open up a novel avenue for direct synthesis of semiconducting nanowire arrays on SiO2/Si substrate.

physics.app-ph↗

arXiv2019

Observation of ballistic avalanche phenomena in nanoscale vertical InSe/BP heterostructures

Initiating impact ionization of avalanche breakdown essentially requires applying a high electric field in a long active region, hampering carrier-multiplication with high gain, low bias and superior noise performance. Here we report the observation of ballistic avalanche phenomena in sub-MFP scaled vertical indium selenide (InSe)/black phosphorus (BP) heterostructures. The heterojunction is engineered to avalanche photodetectors (APD) and impact ionization transistors, demonstrating ultra-sensitive mid-IR light detection (4 μm wavelength) and ultra-steep subthreshold swing, respectively. These devices show an extremely low avalanche threshold (<1 volt), excellent low noise figures and distinctive density spectral shape. Further transport measurement evidences the breakdown originals from a ballistic avalanche phenomenon, where the sub-MFP BP channel enables both electrons and holes to impact-ionize the lattice and abruptly amplify the current without scattering from the obstacles in a deterministic nature. Our results shed light on the development of advanced photodetectors and efficiently facilitating carriers on the nanoscale.

cond-mat.mtrl-sci↗

arXiv2018

Defect Engineering for Modulating the Trap States in Two-dimensional Photoconductor

Defect induced trap states are essential in determining the performance of semiconductor photodetectors. The de-trap time of carriers from a deep trap could be prolonged by several orders of magnitude as compared to shallow trap, resulting in additional decay/response time of the device. Here, we demonstrate that the trap states in two-dimensional ReS2 could be efficiently modulated by defect engineering through molecule decoration. The deep traps that greatly prolong the response time could be mostly filled by Protoporphyrin (H2PP) molecules. At the same time, carrier recombination and shallow traps would in-turn play dominant roles in determining the decay time of the device, which can be several orders of magnitude faster than the as-prepared device. Moreover, the specific detectivity of the device is enhanced (as high as ~1.89 x 10^13 Jones) due to the significant reduction of dark current through charge transfer between ReS2 and molecules. Defect engineering of trap states therefore provides a solution to achieve photodetectors with both high responsivity and fast response.

cond-mat.mtrl-sci↗

arXiv2017

Intrinsic p-type W-based transition metal dichalcogenide by substitutional Ta-doping

Two-dimensional (2D) transition metal dichalcogenides (TMDs) have recently emerged as promising candidates for future electronics and optoelectronics. While most of TMDs are intrinsic n-type semiconductors due to electron donating which originates from chalcogen vacancies, obtaining intrinsic high-quality p-type semiconducting TMDs has been challenging. Here, we report an experimental approach to obtain intrinsic p-type Tungsten (W)-based TMDs by substitutional Ta-doping. The obtained few-layer Ta-doped WSe2 (Ta0.01W0.99Se2) field-effect transistor (FET) devices exhibit competitive p-type performances, including ~10^6 current on/off at room temperature. We also demonstrate high quality van der Waals (vdW) p-n heterojunctions based on Ta0.01W0.99Se2/MoS2 structure, which exhibit nearly ideal diode characteristics (with an ideality factor approaching 1 and a rectification ratio up to 10^5) and excellent photodetecting performance. Our study suggests that substitutional Ta-doping holds great promise to realize intrinsic p-type W-based TMDs for future electronic and photonic applications.

cond-mat.mtrl-sci↗

arXiv2017

Room-temperature high detectivity mid-infrared photodetectors based on black arsenic phosphorus

The mid-infrared (MIR) spectral range, pertaining to important applications such as molecular 'fingerprint' imaging, remote sensing, free space telecommunication and optical radar, is of particular scientific interest and technological importance. However, state-of-the-art materials for MIR detection are limited by intrinsic noise and inconvenient fabrication processes, resulting in high cost photodetectors requiring cryogenic operation. We report black arsenic-phosphorus-based long wavelength infrared photodetectors with room temperature operation up to 8.2 um, entering the second MIR atmospheric transmission window. Combined with a van der Waals heterojunction, room temperature specific detectivity higher than 4.9*10^9 Jones was obtained in the 3-5 um range. The photodetector works in a zero-bias photovoltaic mode, enabling fast photoresponse and low dark noise. Our van der Waals heterojunction photodector not only exemplify black arsenic-phosphorus as a promising candidate for MIR opto-electronic applications, but also pave the way for a general strategy to suppress 1/f noise in photonic devices.

cond-mat.mtrl-sci↗

arXiv2016

Efficient Electrical Control of Thin-Film Black Phosphorus Bandgap

Recently rediscovered black phosphorus is a layered semiconductor with promising electronic and photonic properties. Dynamic control of its bandgap can enable novel device applications and allow for the exploration of new physical phenomena. However, theoretical investigations and photoemission spectroscopy experiments performed on doped black phosphorus through potassium adsorption indicate that in its few-layer form, an exceedingly large electric field in the order of several volts per nanometer is required to effectively tune its bandgap, making the direct electrical control unfeasible. Here we demonstrate the tuning of bandgap in intrinsic black phosphorus using an electric field directly and reveal the unique thickness-dependent bandgap tuning properties, arising from the strong interlayer electronic-state coupling. Furthermore, leveraging a 10-nm-thick black phosphorus in which the field-induced potential difference across the film dominates over the interlayer coupling, we continuously tune its bandgap from ~300 to below 50 milli-electron volts, using a moderate displacement field up to 1.1 volts per nanometer. Such dynamic tuning of bandgap may not only extend the operational wavelength range of tunable black phosphorus photonic devices, but also pave the way for the investigation of electrically tunable topological insulators and topological nodal semimetals.

cond-mat.mes-hall↗

arXiv2016

A light-stimulated neuromorphic device based on graphene hybrid phototransistor

Neuromorphic chip refers to an unconventional computing architecture that is modelled on biological brains. It is ideally suited for processing sensory data for intelligence computing, decision-making or context cognition. Despite rapid development, conventional artificial synapses exhibit poor connection flexibility and require separate data acquisition circuitry, resulting in limited functionalities and significant hardware redundancy. Here we report a novel light-stimulated artificial synapse based on a graphene-nanotube hybrid phototransistor that can directly convert optical stimuli into a "neural image" for further neuronal analysis. Our optically-driven synapses involve multiple steps of plasticity mechanisms and importantly exhibit flexible tuning of both short- and long-term plasticity. Furthermore, our neuromorphic phototransistor can take multiple pre-synaptic light stimuli via wavelength-division multiplexing and allows advanced optical processing through charge-trap-mediated optical coupling. The capability of complex neuromorphic functionalities in a simple silicon-compatible device paves the way for novel neuromorphic computing architectures involving photonics.

cs.ET↗

arXiv2015

Planar carbon nanotube-graphene hybrid films for high-performance broadband photodetectors

Graphene has emerged as a promising material for photonic applications fuelled by its superior electronic and optical properties. However, the photoresponsivity is limited by the low absorption cross section and ultrafast recombination rates of photoexcited carriers. Here we demonstrate a photoconductive gain of $\sim$ 10$^5$ electrons per photon in a carbon nanotube-graphene one dimensional-two dimensional hybrid due to efficient photocarriers generation and transport within the nanostructure. A broadband photodetector (covering 400 nm to 1550 nm) based on such hybrid films is fabricated with a high photoresponsivity of more than 100 AW$^{-1}$ and a fast response time of approximately 100 μs. The combination of ultra-broad bandwidth, high responsivities and fast operating speeds affords new opportunities for facile and scalable fabrication of all-carbon optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2015

Synthesis of thin-film black phosphorus on a flexible substrate

We report a scalable approach to synthesize a large-area (up to 4 mm) thin black phosphorus (BP) film on a flexible substrate. We first deposited a red phosphorus (RP) thin-film on a flexible polyester substrate, followed by its conversion to BP in a high-pressure multi-anvil cell at room temperature. Raman spectroscopy and transmission electron microscopy measurements confirmed the formation of a nano-crystalline BP thin-film with a thickness of around 40 nm. Optical characterization indicates a bandgap of around 0.28 eV in the converted BP, similar to the bandgap measured in exfoliated thin-films. Thin-film BP transistors exhibit a field-effect mobility of around 0.5 cm2/Vs, which can probably be further enhanced by the optimization of the conversion process at elevated temperatures. Our work opens the avenue for the future demonstration of large-scale, high quality thin-film black phosphorus.

cond-mat.mtrl-sci↗

arXiv2015

Black Arsenic-Phosphorus: Layered Anisotropic Infrared Semiconductors with Highly Tunable Compositions and Properties

Two-dimensional (2D) layered materials with diverse properties have attracted significant interest in the past decade. The layered materials discovered so far have covered a wide, yet discontinuous electromagnetic spectral range from semimetallic graphene, insulating boron nitride, to semiconductors with bandgaps from middle infrared to visible light. Here, we introduce new layered semiconductors, black arsenic-phosphorus (b-AsP), with highly tunable chemical compositions and electronic and optical properties. Transport and infrared absorption studies demonstrate the semiconducting nature of b-AsP with tunable bandgaps, ranging from 0.3 to 0.15 eV. These bandgaps fall into long-wavelength infrared (LWIR) regime and cannot be readily reached by other layered materials. Moreover, polarization-resolved infrared absorption and Raman studies reveal in-plane anisotropic properties of b-AsP. This family of layered b-AsP materials extend the electromagnetic spectra covered by 2D layered materials to the LWIR regime, and may find unique applications for future all 2D layered material based devices.

cond-mat.mtrl-sci↗

arXiv2015

Interlayer Interactions in Anisotropic Atomically-thin Rhenium Diselenide

Recently, two-dimensional (2D) materials with strong in-plane anisotropic properties such as black phosphorus have demonstrated great potential for developing new devices that can take advantage of its reduced lattice symmetry with potential applications in electronics, optoelectronics and thermoelectrics. However, the selection of 2D material with strong in-plane anisotropy has so far been very limited and only sporadic studies have been devoted to transition metal dichalcogenides (TMDC) materials with reduced lattice symmetry, which is yet to convey the full picture of their optical and phonon properties, and the anisotropy in their interlayer interactions. Here, we study the anisotropic interlayer interactions in an important TMDC 2D material with reduced in-plane symmetry - atomically thin rhenium diselenide (ReSe2) - by investigating its ultralow frequency interlayer phonon vibration modes, the layer dependent optical bandgap, and the anisotropic photoluminescence (PL) spectra for the first time. The ultralow frequency interlayer Raman spectra combined with the first study of polarization-resolved high frequency Raman spectra in mono- and bi-layer ReSe2 allows deterministic identification of its layer number and crystal orientation. PL measurements show anisotropic optical emission intensity with bandgap increasing from 1.26 eV in the bulk to 1.32 eV in monolayer, consistent with the theoretical results based on first-principle calculations. The study of the layer-number dependence of the Raman modes and the PL spectra reveals the relatively weak van der Waals interaction and 2D quantum confinement in atomically-thin ReSe2.

cond-mat.mes-hall↗

arXiv2014

Highly Anisotropic and Robust Excitons in Monolayer Black Phosphorus

Semi-metallic graphene and semiconducting monolayer transition metal dichalcogenides (TMDCs) are the two-dimensional (2D) materials most intensively studied in recent years. Recently, black phosphorus emerged as a promising new 2D material due to its widely tunable and direct bandgap, high carrier mobility and remarkable in-plane anisotropic electrical, optical and phonon properties. However, current progress is primarily limited to its thin-film form, and its unique properties at the truly 2D quantum confinement have yet to be demonstrated. Here, we reveal highly anisotropic and tightly bound excitons in monolayer black phosphorus using polarization-resolved photoluminescence measurements at room temperature. We show that regardless of the excitation laser polarization, the emitted light from the monolayer is linearly polarized along the light effective mass direction and centers around 1.3 eV, a clear signature of emission from highly anisotropic bright excitons. In addition, photoluminescence excitation spectroscopy suggests a quasiparticle bandgap of 2.2 eV, from which we estimate an exciton binding energy of around 0.9 eV, consistent with theoretical results based on first-principles. The experimental observation of highly anisotropic, bright excitons with exceedingly large binding energy not only opens avenues for the future explorations of many-electron effects in this unusual 2D material, but also suggests a promising future in optoelectronic devices such as on-chip infrared light sources.

cond-mat.mes-hall↗

arXiv2014

Black Phosphorus Radio-Frequency Transistors

Few-layer and thin film forms of layered black phosphorus (BP) have recently emerged as a promising material for applications in high performance nanoelectronics and infrared optoelectronics. Layered BP thin film offers a moderate bandgap of around 0.3 eV and high carrier mobility, leading to transistors with decent on-off ratio and high on-state current density. Here, we demonstrate the gigahertz frequency operation of black phosphorus field-effect transistors for the first time. The BP transistors demonstrated here show excellent current saturation with an on-off ratio exceeding 2000. We achieved a current density in excess of 270 mA/mm and DC transconductance above 180 mS/mm for hole conduction. Using standard high frequency characterization techniques, we measured a short-circuit current-gain cut-off frequency fT of 12 GHz and a maximum oscillation frequency fmax of 20 GHz in 300 nm channel length devices. BP devices may offer advantages over graphene transistors for high frequency electronics in terms of voltage and power gain due to the good current saturation properties arising from their finite bandgap, thus enabling the future ubiquitous transistor technology that can operate in the multi-GHz frequency range and beyond.

cond-mat.mes-hall↗

arXiv2012

Polarization Dependent Loss and All-Optical Modulation in Graphene on Suspended Membrane Waveguides

We observe a strong polarization dependent optical loss of in-plane light propagation in silicon waveguide due to the presence of graphene. Both transverse-electric (TE) and transverse-magnetic (TM) modes are efficiently (~3 dB) coupled to the graphene on suspended membrane waveguides using an apodized focusing subwavelength grating. The TE mode has 7.7 dB less excess optical loss than the TM mode at 1.5 μm for a 150 μm long waveguide in good agreement with a theoretical model. All-optical modulation of light is demonstrated. There is also a large thermally induced change in waveguide effective index because of optical absorption in graphene.

physics.optics↗