Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2201.03673

Alloyed B-(AlxGa1-x)2O3 bulk Czochralski single B-(Al0.1Ga0.9)2O3 and polycrystals B-(Al0.33Ga0.66)2O3, B-(Al0.5Ga0.5)2O3), and property trends

Jani Jesenovec·Benjamin L. Dutton·Nicholas Stone-Weiss·Adrian Chmielewski·Muad Saleh·Carl Peterson·Nasim Alem·Sriram Krishnamoorthy·John S. McCloy
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this work, bulk Czochralski-grown single crystals of 10 mol. % Al2O3 alloyed B-Ga2O3 - monoclinic 10% AGO or B-(Al0.1Ga0.9)2O3 - are obtained, which show +0.20 eV increase in the bandgap compared with unintentionally doped B-Ga2O3. Further, growths of 33% AGO - B-(Al0.33Ga0.67)2O3 - and 50% AGO - B-(Al0.5Ga0.5)2O3 or B-AlGaO3 - produce polycrystalline single-phase monoclinic material (B-AGO). All three compositions are investigated by x-ray diffraction, Raman spectroscopy, optical absorption, and 27Al nuclear magnetic resonance (NMR). By investigating single phase B-AGO over a large range of Al2O3 concentrations (10 - 50 mol. %), broad trends in the lattice parameter, vibrational modes, optical bandgap, and crystallographic site preference are determined. All lattice parameters show a linear trend with Al incorporation. According to NMR, aluminum incorporates on both crystallographic sites of B-Ga2O3, with a slight preference for the octahedral (GaII) site, which becomes more disordered with increasing Al. Single crystals of 10% AGO were also characterized by x-ray rocking curve, transmission electron microscopy, purity (glow discharge mass spectroscopy and x-ray fluorescence), optical transmission (200 nm - 20 um wavelengths), and resistivity. These measurements suggest that electrical compensation by impurity acceptor doping is not the likely explanation for high resistivity, but rather the shift of a hydrogen level from a shallow donor to a deep acceptor due to Al alloying. .. Cont. This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Journal of Applied Physics 131 155702.

Explore related subjects

cond-mat.mtrl-sciphysics.app-ph

Keep this discovery

BibTeXRIS

Jani Jesenovec, Benjamin L. Dutton, Nicholas Stone-Weiss, Adrian Chmielewski, Muad Saleh, Carl Peterson, Nasim Alem, Sriram Krishnamoorthy, John S. McCloy. 2022-01-10. Alloyed B-(AlxGa1-x)2O3 bulk Czochralski single B-(Al0.1Ga0.9)2O3 and polycrystals B-(Al0.33Ga0.66)2O3, B-(Al0.5Ga0.5)2O3), and property trends. https://doi.org/10.1063/5.0073502

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗